Sinotimer Digital Programmable Timer TM618N-2 User Manual

1. Produk verbyview

The Sinotimer TM618N-2 is a versatile 7-day weekly digital programmable timer designed for automated control of electrical equipment. It allows users to set specific daily or weekly schedules for turning devices on and off, ensuring efficient energy management and convenience. This timer is suitable for a wide range of applications, including controlling lighting, heating, ventilation, and other electrical appliances.

Figuur 1: Voorkant view of the Sinotimer TM618N-2 Digital Timer, showing the display and control buttons.

2. Sleutel kenmerke

• Weekliks Programmeerbaar: Allows up to 16 ON/OFF programs per day or week.
• Multifunksioneel: Includes Clock display, Timer, Countdown, Automatic weekly time deviation correction, and Sleep mode.
• Hoë kapasiteit: Ondersteun 16 Amp / 220 Volt AC loads.
• Wye Voltage Verenigbaarheid: Operates with 220V, 230V, 240V AC.
• Ingeboude battery: Behou instellings tydens krag outages (Lithium battery type).
• Veelsydige toepassings: Ideal for controlling dryers, defrosting equipment, swimming pool pumps, gates, lighting, and more.

3. Spesifikasies

4. Installasie

Belangrike veiligheidskennisgewing: Installation should only be performed by a qualified electrician. Ensure power is disconnected before attempting any wiring.

1. Montering: The TM618N-2 is designed for DIN rail mounting or screw mounting. Secure the timer in a suitable electrical enclosure.
2. Bedrading: Refer to the wiring diagram on the back of the unit.
   

   Figuur 2: Terug view of the Sinotimer TM618N-2, showing input/output terminals and wiring diagram.

   • Input (Terminals 1 & 2): Connect your 200-250VAC power supply to these terminals.
   • Output (Terminals 3, 4, & 5):
     • Terminal 3: Common (COM)
     • Terminal 4: Normally Open (NO) - Connect your load here for switched power.
     • Terminal 5: Normally Closed (NC) - (Less commonly used for timer applications, but available).
3. Krag aan: Once wiring is complete and secure, restore power to the circuit. The timer display should illuminate.

Figure 3: Technical drawing showing the dimensions of the Sinotimer TM618N-2 timer.

5. Bedryfsinstruksies

5.1. Knoppie Funksies

• KLOK: Used to set the current time and day.
• PROG: Enters/exits programming mode for ON/OFF schedules.
• WEEK: Selects the day(s) of the week during time or program setting.
• UUR: Adjusts the hour during time or program setting.
• MIN: Adjusts the minute during time or program setting.
• ONTHOU: Recalls or cancels a program setting.
• HANDLEIDING: Manually overrides the timer's current state (ON/AUTO/OFF).
• R (Herstel): Small button (requires a pointed object) to reset the timer to factory defaults.

5.2. Instelling van Huidige Tyd en Dag

1. Druk en hou die KLOK knoppie.
2. Terwyl jy vashou KLOK, druk WEEK om die huidige dag in te stel (MA, DI, WO, DO, VR, SA, SO).
3. Terwyl jy vashou KLOK, druk UUR om die huidige uur te stel.
4. Terwyl jy vashou KLOK, druk MIN om die huidige minuut te stel.
5. Los die KLOK knoppie om die instellings te stoor.

5.3. Programming ON/OFF Schedules

The timer supports up to 16 ON and 16 OFF programs. Each program can be set for a specific day or group of days.

1. Druk die PROG knoppie een keer. Die skerm sal "1 AAN" wys.
2. Druk WEEK repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU; MO-FR; SA-SU; MO-SA; etc.).
3. Druk UUR om die verlangde AAN-uur in te stel.
4. Druk MIN om die verlangde AAN-minuut in te stel.
5. Druk PROG weer. Die skerm sal "1 AF" wys.
6. Herhaal stappe 2-4 om die verlangde AF-tyd vir die eerste program in te stel.
7. Druk PROG to move to the next program ("2 ON", "2 OFF", etc.) and repeat the process for up to 16 programs.
8. To exit programming mode and save settings, press the KLOK knoppie.

5.4. Handmatige oorskrywing

Druk die HANDLEIDING button to cycle through the output modes:

• OP: Output is continuously ON, ignoring programs.
• VOERTUIG: Output follows the programmed schedules.
• AF: Output is continuously OFF, ignoring programs.

Maak seker dat die timer in is AUTO mode for programmed operation.

5.5. Herstel van die timer

To clear all settings and return the timer to its factory default state, insert a pointed object (like a paperclip) into the small R (Reset) hole and press gently.

6. Onderhoud

The Sinotimer TM618N-2 requires minimal maintenance.

• Hou die toestel skoon en stofvry. Gebruik 'n sagte, droë lap vir skoonmaak.
• Moenie skuur skoonmaakmiddels of oplosmiddels gebruik nie.
• Ensure the timer is installed in a dry environment, away from direct moisture or extreme temperatures.
• The internal battery is designed for long life and is not user-replaceable. If the display goes blank or settings are not retained after a power outage, the battery may need professional service.

7. Probleemoplossing

8. Waarborg en Ondersteuning

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.

Manufacturer: Sinotimer