Robert Stevenson Lighting Addison Metaal en Glas Buiteluglig Instruksiehandleiding

1. Inleiding

Thank you for choosing the Robert Stevenson Lighting Addison Metal and Glass Outdoor Light. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

The Addison outdoor light features a modern architectural design with clear glass panels encased in a textured black metal frame. It is designed for outdoor use and is wet location rated, making it suitable for direct water exposure.

2. Veiligheidsinligting

WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the circuit breaker or fuse box before installation or servicing.

• Alle elektriese verbindings moet in ooreenstemming wees met plaaslike kodes, verordeninge of die Nasionale Elektriese Kode (NEC). Raadpleeg 'n gekwalifiseerde elektrisiën as u nie vertroud is met behoorlike elektriese bedradingsverbindings nie.
• Maak seker dat die toebehore behoorlik geaard is.
• Moenie hierdie toestel met nat hande installeer of terwyl jy op 'n nat of droë plek staan ​​nie.amp oppervlak.
• Gebruik slegs gloeilampe van die gespesifiseerde tipe en wattage.
• Keep combustible materials away from the light fixture.

3. Pakketinhoud

Verifieer dat alle komponente teenwoordig is voor installasie:

• Addison Metal and Glass Outdoor Light Fixture
• Mounting Hardware (mounting bracket, screws, wire nuts, acorn nuts)
• Instruksie Handleiding

Let wel: Gloeilamp is nie ingesluit nie.

4. Opstelling en installering

This fixture requires hardwiring. Professional installation is recommended if you are not experienced with electrical wiring.

1. Berei voor vir installasie: Turn off power at the main circuit breaker or fuse box. Ensure the power is off before proceeding.
2. Montagebeugel installasie: Attach the mounting bracket to the electrical junction box in the wall using the provided screws. Ensure the bracket is level.
3. Bedrading verbindings: Connect the fixture's wires to the house wiring using the provided wire nuts. Match the wires as follows:
   • Black (Live/Hot) to Black (Live/Hot)
   • Wit (Neutraal) na Wit (Neutraal)
   • Bare Copper or Green (Ground) to Bare Copper or Green (Ground)
   Steek alle drade versigtig in die aansluitkas.
4. Toebehore Aanhegsel: Align the fixture with the mounting bracket. Secure the fixture to the bracket using the two acorn nuts. Ensure the fixture is flush against the wall and securely fastened.
5. Gloeilamp installasie: Refer to the 'Operating Instructions' section for bulb type and installation.
6. Herstel krag: Sodra die installasie voltooi is en alle verbindings veilig is, herstel die krag by die stroombreker.

Beeld 1: Voorkant view of the Addison Outdoor Light fixture. This image shows the overall design with the clear glass panels and textured black metal frame, ready for installation.

Image 2: Addison Outdoor Light with indicated dimensions of 9 inches (width) and 17 inches (height). This helps in planning the installation location.

Image 3: The Addison Outdoor Light installed on an exterior wall next to a door, demonstrating its appearance in a typical outdoor setting.

5. Bedryfsinstruksies

The Addison outdoor light is designed for simple operation once installed.

• Gloeilamp tipe: This fixture uses one E26 base incandescent bulb, maximum 100 watts. Edison-style bulbs are recommended for aesthetic purposes.
• Krag aan/af: The light is controlled by an external wall switch (push button type) connected to its hardwired power source.

6. Onderhoud

Regular maintenance ensures the longevity and optimal performance of your outdoor light.

• Skoonmaak: Om die toestel skoon te maak, maak seker dat die krag afgeskakel is. Vee af met 'n sagte, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
• Gloeilamp vervanging: To replace the bulb, turn off power at the circuit breaker. The fixture's design requires access to the bulb by unscrewing the four screws located on the bottom cover (or top cover, depending on installation orientation). Carefully remove the cover, replace the E26 bulb (max 100W), then reattach the cover and secure the screws. Restore power.

Beeld 4: Nabyskoot view of the top of the Addison Outdoor Light, showing the textured black finish. This area may need to be accessed for bulb replacement if the fixture is installed inverted.

7. Probleemoplossing

If you encounter issues with your Addison outdoor light, refer to the following common problems and solutions:

• Lig gaan nie aan nie:
  • Gaan die stroombreker na om te verseker dat krag aan is.
  • Verify the bulb is securely screwed into the socket and is not burnt out.
  • Maak seker dat alle bedradingsverbindings veilig en korrek is.
• Ligte flikker:
  • Draai die gloeilamp in die sok vas.
  • Kyk vir los bedrading verbindings.
  • Verseker die gloeilamp wattage does not exceed the maximum rating.
• Difficulty replacing bulb:
  • Remember to turn off power before attempting bulb replacement.
  • The bulb is accessed by unscrewing the four screws on the bottom (or top) cover of the fixture.

8. Spesifikasies

9. Waarborginligting

This product is sold without an explicit manufacturer's warranty. Please refer to your retailer's return policy for any issues upon receipt.

10. Ondersteuning

For further assistance or inquiries regarding your Robert Stevenson Lighting Addison Outdoor Light, please contact your point of purchase or refer to the retailer's customer service channels.