Displays2go Motorized Rolling TV Stand (DGMLTSBK)

Inleiding

Thank you for choosing the Displays2go Motorized Rolling TV Stand. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your new TV stand. Please read all instructions carefully before assembly and use.

Belangrike veiligheidsinligting

• Lees alle instruksies: Ensure you understand all assembly and operation instructions before use.
• Gewig kapasiteit: Moenie die maksimum gewigskapasiteit van 265 lbs (120 kg) oorskry nie.
• Skermgrootte: This stand is designed for screens between 43" and 100".
• Kragbron: Connect the stand to a grounded power outlet (110V-250V).
• Kabelbestuur: Ensure all cables are properly routed and secured to prevent tripping hazards or damage during movement.
• Caster Locks: Always engage the caster locks when the stand is in a stationary position to prevent accidental movement.
• Kinders en Troeteldiere: Keep children and pets away from the stand during operation to prevent injury.
• Onderhoud: Do not attempt to service the motorized components yourself. Refer to qualified service personnel.

Opstelling en samestelling

Carefully unpack all components and verify against the parts list (not provided in this document, refer to packaging). Assembly typically involves attaching the base, column, and TV mounting brackets.

1. Basissamestelling

Attach the four heavy-duty casters to the base frame. Ensure they are securely fastened. Two casters are lockable; position them for easy access.

2. Column Installation

Mount the motorized column onto the assembled base. Follow the specific instructions provided with your hardware kit to ensure proper alignment and secure attachment.

3. TV Mounting Bracket Attachment

Attach the VESA-compatible mounting brackets to the back of your television. Refer to your TV's manual for appropriate screw sizes and mounting points. The stand supports VESA sizes up to 800x600.

Image: The TV stand's mounting brackets are visible, ready for television attachment. This image shows the stand without a TV, highlighting the VESA mounting plate and the motorized column.

4. Montering van die TV

Carefully lift your television and hook the attached brackets onto the stand's mounting plate. Secure the TV using the provided safety screws or clips. Ensure the TV is level and stable.

Image: The motorized TV stand with a large television securely mounted in a vertical viewing posisie.

5. Kragverbinding

Connect the power cord to the stand and then to a suitable electrical outlet. The power cord length is 64 inches.

Bedryfsinstruksies

The Displays2go Motorized Rolling TV Stand features remote-controlled height adjustment and tilt functionality.

Afstandbeheerfunksies

• Op/af knoppies: Use these buttons to raise or lower the television screen. The height can be adjusted from 36" to 62".
• Tilt Buttons: Use these buttons to adjust the viewing angle of the screen, from a vertical position (0°) down to a horizontal table position (90°).

Hoogte verstel

Press the "Up" or "Down" buttons on the remote control to move the screen to your desired height. The motorized mechanism will smoothly adjust the display.

Image: Illustration demonstrating the adjustable height feature of the TV stand, showing the screen at different vertical positions.

Verstel van kantel

Press the "Tilt Up" or "Tilt Down" buttons on the remote control to change the screen's angle. This allows for conversion from a vertical display to an interactive horizontal table.

Image: Illustration demonstrating the adjustable tilt feature, showing the screen transitioning from vertical to a horizontal table-like orientation.

Image: The TV stand with a television fully tilted to a horizontal position, suitable for interactive table use.

Mobiliteit

To move the stand, unlock the two lockable casters. Carefully push the stand to its new location. Once positioned, engage the caster locks to stabilize the stand.

Produk video

Onderhoud

• Skoonmaak: Vee die staander af met 'n sagte, damp lap. Vermy skuurmiddels of oplosmiddels.
• Inspeksies: Periodically check all fasteners and connections to ensure they are tight and secure.
• Motorized Components: The motorized system is designed for long-term use and generally requires no user maintenance. Do not lubricate or disassemble.
• toorkuns: Hou wiele vry van puin om gladde rol te verseker.

Probleemoplossing

Spesifikasies

Waarborg en Ondersteuning

Waarborg inligting

This product is typically covered by a manufacturer's warranty. Please refer to your purchase documentation or contact Displays2go directly for specific warranty terms and conditions. A 30-day return policy is generally offered for this product.

Kliënte ondersteuning

For technical assistance, missing parts, or any questions regarding your Displays2go Motorized Rolling TV Stand, please contact Displays2go customer support. Contact information can typically be found on the Displays2go webwebwerf of jou aankoopfaktuur.