1. Inleiding
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Juki HZL-8370AT Home Electronic Sewing Machine. Please read this manual thoroughly before using the machine and keep it for future reference.
2. Veiligheidsinstruksies
- Always unplug the machine from the electrical outlet immediately after using, before cleaning, or when making any user servicing adjustments.
- Do not operate the machine with a damaged cord or plug. If the machine is not working properly, has been dropped, damaged, or dropped into water, return it to the nearest authorized service dealer for examination, repair, electrical or mechanical adjustment.
- Hou vingers weg van alle bewegende dele. Spesiale versigtigheid is nodig rondom die naaimasjiennaald.
- Gebruik altyd die regte naaldplaat. Die verkeerde plaat kan veroorsaak dat die naald breek.
- Do not pull or push fabric while stitching. This may deflect the needle causing it to break.
- Use only accessories recommended by the manufacturer as contained in this manual.
- Hierdie toestel is nie bedoel vir gebruik deur persone (insluitend kinders) met verminderde fisiese, sensoriese of geestelike vermoëns, of 'n gebrek aan ervaring en kennis nie, tensy hulle toesig of instruksies oor die gebruik van die toestel gegee is deur 'n persoon wat verantwoordelik is vir hul veiligheid.
3. Produk verbyview
The Juki HZL-8370AT is a versatile home electronic sewing machine designed for various sewing projects. It features 19 stitch types and a robust one-piece metal frame for stability.

Figuur 1: Voorkant view of the Juki HZL-8370AT Home Electronic Sewing Machine. This image shows the main body of the machine, including the needle area, stitch selection dial, and various controls.
Sleutelkomponente:
- Steekkeuseskakelaar: Used to choose from the 19 available stitch patterns.
- Thread Tension Dial: Adjusts the tension of the upper thread.
- Needle Bar and Presser Foot: Holds the needle and applies pressure to the fabric.
- Spoelwinder: Vir die opwinding van draad op die spoel.
- Handwiel: Lig en laat sak die naald handmatig.
- Foot Pedal Connector: For connecting the foot pedal to control sewing speed.
4. Opstelling
4.1 Uitpak en plasing
- Verwyder die masjien versigtig uit sy verpakking.
- Place the machine on a stable, flat surface. Ensure there is adequate space around the machine for comfortable operation.
- Connect the foot pedal and power cord to the machine and then to a suitable electrical outlet.
4.2 Installing the Needle
- Turn the handwheel towards you to raise the needle to its highest position.
- Maak die naald losamp skroef.
- Insert a new needle with the flat side facing the back of the machine, pushing it up as far as it will go.
- Draai die naald styf clamp skroef stewig vas.
4.3 Die spoel opwind
- Plaas 'n klos draad op die klospen.
- Lei die draad deur die spoelspanningskyf.
- Plaas 'n leë spoel op die spoelwinder se as.
- Draai die draad 'n paar keer om die spoel en druk dan die spoelwinder-as na regs.
- Press the foot pedal gently to start winding. Stop when the bobbin is full.
- Cut the thread and return the bobbin winder spindle to the left.
4.4 Die masjien insny
- Raise the presser foot and needle to their highest positions.
- Place the spool of thread on the spool pin.
- Follow the numbered threading path indicated on the machine, ensuring the thread passes through all guides and the take-up lever.
- Ryg die naald van voor na agter.
- Insert the wound bobbin into the bobbin case under the needle plate, ensuring the thread feeds correctly.
- Hold the upper thread, turn the handwheel to lower and raise the needle, catching the bobbin thread. Pull both threads under the presser foot and towards the back.
5. Bedryfsinstruksies
5.1 Selecting a Stitch
Turn the Stitch Selection Dial to choose one of the 19 available stitch patterns. Refer to the stitch chart on the machine for visual guidance.

Figure 2: Close-up of the stitch selection dial and various stitch patterns available on the Juki HZL-8370AT. This shows the range of stitches from basic to decorative.
5.2 Adjusting Stitch Length and Width
- The maximum stitch length is 5 mm. Adjust the stitch length dial according to your fabric and desired stitch appearance.
- The maximum stitch width is 7 mm. Adjust the stitch width dial for zigzag or decorative stitches.
5.3 Begin om te naai
- Plaas die stof onder die drukvoet.
- Laat sak die persvoet sak.
- Gently press the foot pedal to start sewing. The sewing speed is up to 800 stitches per minute.
- Guide the fabric gently, do not pull or push.
5.4 Reverse Sewing
To reinforce a seam, press and hold the reverse lever/button while sewing. Release it to continue sewing forward.
6. Onderhoud
6.1 Skoonmaak van die masjien
- Ontkoppel altyd die masjien voordat dit skoongemaak word.
- Remove the needle plate and bobbin case.
- Use a small brush to remove lint and dust from the feed dogs and bobbin area.
- Wipe the exterior of the machine with a soft, dry cloth. Do not use harsh chemicals.
6.2 Changing Needles
Change the needle regularly, especially if it becomes bent, dull, or if you notice skipped stitches. Refer to section 4.2 for needle installation instructions.
7. Probleemoplossing
Algemene kwessies en oplossings:
- Oorgeslaande steke: Ensure the needle is inserted correctly and is not bent or dull. Use the correct needle type for your fabric.
- Draad breek: Check if the machine is threaded correctly, the thread tension is appropriate, and the needle is not damaged. Ensure the thread is not tangled.
- Masjienblokkering: Remove any tangled threads from the bobbin area. Ensure the bobbin is wound and inserted correctly.
- Ongelyke Steke: Adjust the thread tension. Ensure the fabric is fed evenly without pulling.
Indien probleme voortduur nadat u hierdie oplossings probeer het, kontak asseblief kliëntediens.
8. Spesifikasies
| Kenmerk | Spesifikasie |
|---|---|
| Model | HZL-8370AT |
| Tik | Home Electronic Sewing Machine |
| Number of Stitches | 19 |
| Maksimum steeklengte | 5 mm |
| Maksimum steekbreedte | 7 mm |
| Naaldwerk spoed | 800 XNUMX steke per minuut |
| Krag | 70 Watt |
| Raammateriaal | Metal (one-piece) |
| Kleur | Wit |
| Item gewig | 6.93 kilogram |
| Versending Afmetings | 42.5 x 35 x 22.5 cm |
| Aanbevole gebruike | Home sewing, clothing repair, craft projects, textile manufacturing |
| GTIN (UPC) | 06936986883709 |
9. Waarborg en Ondersteuning
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Juki webwebwerf. Bewaar u bewys van aankoop vir waarborgeise.