Avallon AIMG151GSSILH Ice Maker Instruction Manual

Inleiding

This manual provides essential information for the safe and efficient operation of your Avallon AIMG151GSSILH 15-inch built-in/free-standing ice maker. This unit is designed to produce uniquely shaped, clear gourmet ice cubes that melt slowly, enhancing your beverages. It features rapid ice production, capable of producing up to 56 lbs. of ice in 24 hours, with a storage capacity of 26 lbs. The door is constructed from high-quality 304 stainless steel and includes a convenient wash mode for easy maintenance.

Veiligheidsinligting

WARNING: Risk of Electric Shock. Disconnect Power Before Servicing Unit.

Please read all instructions carefully before using the appliance to reduce the risk of fire, electric shock, or injury. This ice maker is ETL and UL listed, ensuring it meets safety standards. It is approved for outdoor use, but proper installation and electrical precautions must be observed. This product is not a freezer and will not keep stored items frozen indefinitely.

Proposisie 65 Waarskuwing:

Hierdie produk kan jou blootstel aan chemikalieë, insluitend Di(2-etielheksiel)ftalaat (DEHP), wat aan die staat Kalifornië bekend is om kanker en geboortedefekte of ander reproduktiewe skade te veroorsaak. Vir meer inligting gaan na www.P65Warnings.ca.gov.

Opstelling

Uitpak en Komponente

Verwyder die ysmasjien versigtig uit sy verpakking. Maak seker dat alle komponente teenwoordig is:

• Avallon AIMG151GSSILH Ice Maker Unit
• Yslepel
• Water Inlet Pipe (1/4" size)
• Dreineer die slang
• Door Handle and Fixed Screws

Plasing en Afmetings

The Avallon AIMG151GSSILH can be installed as a built-in unit or as a free-standing appliance. Ensure adequate ventilation, especially for built-in installations, as the unit features front heat dissipation. The dimensions are: Depth: 23-1/4"; Width: 14-15/16"; Height: 33-3/4".

Figure 1: Avallon AIMG151GSSILH Ice Maker with labeled dimensions (Depth: 22.63", Width: 14.94", Height: 33.75").

Figure 2: Avallon AIMG151GSSILH Ice Maker installed as a built-in unit under a kitchen counter.

Deurhandvatsel installasie

Om die deurhandvatsel te installeer:

1. Remove the door handle and fixed screws from the packaging.
2. Unscrew the secret screw at the bottom of the door handle with the hex wrench to a certain extent to prevent it from not fitting during installation.
3. Peel off the protective film on the door surface to reveal the screw holes at the top.
4. Align the fixed screws of the door handle vertically with the holes on the door.
5. Tighten them with a crosshead screwdriver.
6. Align the door handle with the fixed screws, push it in, and ensure it is fully seated.
7. Tighten the bottom security screws.
8. After securing, pull the door handle to ensure it does not become loose.

Water Inlet Pipe Installation

Connect the 1/4" water inlet pipe to the ice maker:

1. Remove the clip from the water intake port at the back of the ice maker.
2. Align the water pipe with the inlet and push it firmly into place.
3. Reattach the clip that was removed earlier to secure the pipe.
4. Gently pull the water pipe outward to ensure it is securely fixed.
5. To replace or remove the water inlet pipe, first remove the buckle, then push the water inlet pipe inward to remove and replace it.

Installasie van afvoerslang

Proper drain hose installation is crucial for efficient water discharge:

1. Remove the waterproof plug from the drain port at the back of the ice maker.
2. Align the larger end of the drain hose with the drain port and push it in firmly.
3. Ensure the entire drain pipe is positioned lower than the water outlet on the ice maker, as the unit relies on gravity drainage. If the drain hose is too high, water cannot drain smoothly.

Elektriese aansluiting

Connect the ice maker to a standard 120 Volt electrical outlet. Ensure the outlet is properly grounded and meets local electrical codes.

Bedryfsinstruksies

Beheerpaneel

The ice maker features an intuitive control panel for easy operation. Indicators typically include:

• YS MAAK: Indicates when the unit is actively producing ice.
• YS VOL: Brand wanneer die ysopbergbak vol is.
• WASH MODE: Activates the self-cleaning cycle.

Figure 3: Control panel with Ice, Off, and Wash mode selections.

Ysproduksie

The Avallon AIMG151GSSILH can produce up to 56 lbs. of ice per day and store up to 26 lbs. The unit will automatically stop ice production when the storage bin is full and resume when ice levels decrease.

Figure 4: Ice production and collection inside the unit.

Figure 5: Ice storage bin filled with gourmet ice.

Gourmet ys

This ice maker produces uniquely shaped, clear gourmet ice cubes that melt slowly, preserving the flavor of your beverages.

Figure 6: Close-up of the gourmet ice cubes produced by the unit.

Onderhoud

Wasmodus

The ice maker is equipped with a wash mode for easy maintenance. Simply activate this mode via the control panel to initiate a self-cleaning cycle. Refer to the control panel section for details on activating the wash mode.

Algemene skoonmaak

Regular cleaning of your ice maker is essential to ensure optimal performance and hygiene. Follow these general guidelines:

• Periodically clean the interior of the ice storage bin with a mild detergent and warm water. Rinse thoroughly.
• Clean the exterior surfaces with a soft cloth and mild soap. Avoid abrasive cleaners.
• Ensure the air vents are clear of dust and debris to maintain proper airflow and cooling efficiency.

Probleemoplossing

If you experience issues with your ice maker, consider the following common solutions:

• Geen ysproduksie: Check if the unit is powered on, the water supply is connected and turned on, and the ice bin is not full.
• Slow Ice Production: Ensure the unit has adequate ventilation and the ambient temperature is within the recommended operating range.
• Waterlekkasie: Verify that all water connections, including the inlet pipe and drain hose, are securely attached and properly positioned for gravity drainage.

Vir aanhoudende probleme, verwys asseblief na die gedetailleerde probleemoplossingsafdeling in die volledige produkhandleiding of kontak kliëntediens.

Spesifikasies

Waarborg en Ondersteuning

This product is returnable until January 31, 2026. For any questions or assistance, please contact customer support. Details regarding specific warranty coverage can be found in your purchase documentation or by contacting Avallon customer service directly.