Amazon Basics ASD2401-01E

Amazon Basics Koordlose Herlaaibare Skroewedraaier Gebruikershandleiding

Model: ASD2401-01E

1. Inleiding

Thank you for choosing the Amazon Basics Cordless Rechargeable Screwdriver. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before using the product and keep it for future reference.

Diagram showing features of the Amazon Basics Cordless Screwdriver

Figuur 1: verbyview of the Amazon Basics Cordless Rechargeable Screwdriver with key features highlighted, including torque settings, LED light, USB-C charging port, and 1/4" quick change collet.

2. Pakketinhoud

Maak seker dat alle items wat hieronder gelys word, in u pakket teenwoordig is. Indien enige items ontbreek of beskadig is, kontak asseblief kliëntediens.

  • 1 x Amazon Basics 3.6V (4V max.) Cordless Screwdriver
  • 1 x Integrated 2000 mAh Lithium-ion Rechargeable Battery (pre-installed)
  • 1 x USB-C laaikabel
  • 1 x 10-piece Bit Set (including various Phillips, Slotted, and Pozidriv bits)
Contents of the Amazon Basics Cordless Screwdriver package

Figuur 2: The complete package contents, showing the cordless screwdriver, USB-C charging cable, and the 10-piece bit set with a bit holder.

3. Veiligheidsinligting

Volg altyd basiese veiligheidsmaatreëls wanneer u elektriese gereedskap gebruik om die risiko van brand, elektriese skok en persoonlike besering te verminder.

Algemene veiligheidsreëls:

  • Werksarea veiligheid: Hou jou werkarea skoon en goed belig. Oorvol of donker areas nooi ongelukke uit. Moenie elektriese gereedskap in plofbare atmosfere gebruik nie, soos in die teenwoordigheid van vlambare vloeistowwe, gasse of stof.
  • Elektriese veiligheid: Vermy liggaamskontak met geaarde oppervlaktes (bv. pype, verkoelers, stowe, yskaste). Moenie elektriese gereedskap aan reën of nat toestande blootstel nie.
  • Persoonlike veiligheid: Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. Always wear appropriate personal protective equipment, such as safety glasses, dust mask, non-skid safety shoes, hard hat, or hearing protection.
  • Gereedskap gebruik en versorging: Do not force the power tool. Use the correct power tool for your application. Do not use the power tool if the switch does not turn it on and off. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
  • Batterygereedskapgebruik en -versorging: Herlaai slegs met die laaier wat deur die vervaardiger gespesifiseer is. Gebruik slegs elektriese gereedskap met spesifiek aangewese batterypakke.

4. Opstelling

4.1 Laai die skroewedraaier

The screwdriver comes with an integrated rechargeable Lithium-ion battery. Before first use, fully charge the battery.

  1. Locate the USB-C charging port on the screwdriver (usually at the base or side).
  2. Connect the provided USB-C charging cable to the screwdriver's charging port.
  3. Connect the other end of the USB-C cable to a compatible USB power adapter (not included, 5V max. 1A recommended) or a USB port on a computer.
  4. The charging indicator light (if present) will illuminate during charging and change color or turn off when fully charged.
  5. Charging is easy via USB anywhere.
USB-C charging cable and bit set for the screwdriver

Figuur 3: The USB-C charging cable and the 10-piece bit set, essential accessories for the screwdriver's operation and maintenance.

4.2 Installering/Verandering van Bits

The screwdriver features a 1/4" quick change hexagonal collet for fast and easy bit changes.

  1. Maak seker dat die skroewedraaier afgeskakel is en nie werk nie.
  2. Insert the desired 1/4" hexagonal screwdriver bit firmly into the collet until it clicks into place.
  3. To remove a bit, pull it straight out from the collet.

5. Bedryfsinstruksies

5.1 Powering On and Direction Control

The screwdriver is operated by pressing the forward or reverse buttons.

Top view of the Amazon Basics Cordless Screwdriver showing control buttons

Figuur 4: Top view of the screwdriver highlighting the forward and reverse buttons, and the torque setting indicator.

  • Druk die vorentoe knoppie (usually indicated by an arrow pointing right or forward) to drive screws.
  • Druk die reverse button (usually indicated by an arrow pointing left or backward) to remove screws.
  • Laat die knoppie los om die skroewedraaier te stop.

5.2 Wringkraginstellings

The screwdriver offers 3 adjustable torque settings (low, medium, high) to suit different applications and prevent overtightening or stripping screws.

  • Press the torque adjustment button (often labeled "MAX" or with a torque icon) to cycle through the settings.
  • Select a lower torque for delicate materials or small screws, and a higher torque for tougher materials or larger screws.
  • Die maksimum wringkrag is 5 Nm.

5.3 Integrated LED Lights

Two integrated LED lights illuminate the work area, improving visibility in low-light conditions.

  • The LED lights typically activate automatically when the screwdriver is in operation.
Person using the Amazon Basics Cordless Screwdriver to install a hinge

Figuur 5: The cordless screwdriver being used to install a hinge on a cabinet, demonstrating its compact size and utility in tight spaces.

6. Onderhoud

6.1 Skoonmaak

  • Ontkoppel altyd die gereedskap van enige laaibron voor skoonmaak.
  • Vee die buitekant van die gereedskap af met 'n sagte, damp lap. Moenie harde chemikalieë of skuur skoonmaakmiddels gebruik nie.
  • Hou ventilasie-openinge vry van stof en puin.

6.2 Berging

  • Store the screwdriver in a dry place, away from direct sunlight and extreme temperatures.
  • Maak seker dat die battery gedeeltelik gelaai is voor langtermynberging om die batterygesondheid te handhaaf.
  • Hou buite bereik van kinders.

7. Probleemoplossing

ProbleemMoontlike oorsaakOplossing
Skroewedraaier skakel nie aan nie.Battery is leeg.Charge the battery fully using the provided USB-C cable.
Skroewedraaier stop tydens werking.Overload protection activated / Battery low.Reduce pressure on the tool. Allow it to cool down. Recharge the battery.
Bit slips or screw head strips.Incorrect bit size / Torque setting too high.Ensure the correct bit size is used for the screw. Adjust to a lower torque setting.
Laai-aanwyser werk nie.Foutiewe kabel of kragbron.Probeer 'n ander USB-C-kabel of kragadapter. Maak seker dat die verbindings stewig is.

8. Spesifikasies

ModelnommerASD2401-01E
Voltage3.6 V (4 V maksimum)
Battery TipeIntegrated Lithium-ion, 2000 mAh
Geen laai spoedTot 300 XNUMX RPM
Max Torque5 Nm
Wringkrag instellings3 (Laag, Medium, Hoog)
Spantang Grootte1/4" Hexagonal
LaaipoortUSB-C
Afmetings (L x B x H)3.51 x 3.61 x 17.7 cm (ongeveer 1.38 x 1.42 x 6.97 duim)
Gewig299.37 gram (ongeveer 0.66 lbs)
Land van oorsprongChina
Onderkant view of the Amazon Basics Cordless Screwdriver with product label

Figuur 6: The product label on the underside of the screwdriver, displaying model number, voltage, en vervaardigingsbesonderhede.

9. Waarborg en Ondersteuning

This Amazon Basics product is covered by a 5-jaar gereedskapwaarborg. For warranty claims or technical support, please contact Amazon customer service. Information regarding spare parts availability is currently not provided.

For returns, the standard return policy allows for refunds or replacements within 30 days, as per Amazon's policy.

Vir verdere hulp, besoek die Amazon Basics Winkel.

© 2024 Amazon. Alle regte voorbehou.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.