1. Inleiding
This manual provides detailed instructions for the installation, operation, and maintenance of your Antec NX700 Mid-Tower ATX Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe usage.
Figure 1: Antec NX700 Mid-Tower ATX Gaming Case overview.
Sleutel kenmerke
- 3D Geometric Mesh Front Panel: Designed for optimal airflow and aesthetic appeal.
- Included ARGB Fans: Comes with two 185mm ARGB fans in the front and one 120mm ARGB fan in the rear for effective cooling and customizable lighting.
- Geharde glas sypaneel: A 4mm thick tempered glass side panel provides a clear view van jou interne komponente.
- Uitgebreide Radiatorondersteuning: Supports up to a 360mm radiator for advanced liquid cooling solutions.
- Versatile I/O Panel: Features Power, LED control button, Reset, 2 x USB 3.0 ports, and MIC/HD-AUDIO jacks.
- Moederbordversoenbaarheid: Supports ATX, Micro-ATX, and Mini-ITX motherboards.
Figure 2: Close-up of the 3D geometric mesh front panel, designed for enhanced airflow.
2. Opstelling en installering
Follow these steps to install your components into the Antec NX700 case.
2.1 Included Fans Installation
The case comes pre-installed with two 185mm ARGB fans at the front and one 120mm ARGB fan at the rear. Ensure these fans are properly connected to your motherboard or a fan controller for power and ARGB functionality.
Figure 3: Illustration of the included 2 x 185mm ARGB front fans and 1 x 120mm ARGB rear fan.
2.2 Cooling System Configuration
The NX700 supports various fan and radiator configurations to optimize cooling performance.
- Voor: Supports 3 x 120mm, 3 x 140mm, or 2 x 185mm fans. Radiator support up to 360mm.
- Top: Supports 2 x 120mm or 2 x 140mm fans. Radiator support up to 280mm.
- Agter: Supports 1 x 120mm or 1 x 140mm fan. Radiator support up to 140mm.
- Kragtoevoerbedekking: Supports 2 x 120mm fans.
Figure 4: Diagram illustrating fan and radiator mounting options within the case.
Figure 5: Illustration showing space for a 360mm radiator installation at the front, even with 185mm fans.
2.3 Komponentinstallasie
The NX700 offers ample space for various components. Ensure all cables are routed neatly for optimal airflow and aesthetics.
- Moederbord: Supports ATX motherboards (up to 305mm x 275mm).
- SVE Verkoeler: Maximum height of 170mm.
- Grafiese kaart (GPU): Maximum length of 340mm.
- Kragtoevoer (PSU): Supports PSUs up to 200mm (with HDD) or 365mm (without HDD).
- Berging: 2 x 3.5" HDD / 2.5" SSD (convertible) and 4 x 2.5" SSDs.
Figure 6: Internal layout showing maximum dimensions for CPU cooler, GPU, and motherboard support.
Figuur 7: 'n Interne view of the NX700 case with various components installed, demonstrating space and layout.
2.4 Video Guide for Assembly
Watch this official video for a visual guide on the Antec NX700 Mid-Tower ATX Gaming Case features and assembly process.
Video 1: Amptelike oorwinningview and assembly guide for the Antec NX700 Mid-Tower ATX Gaming Case.
3. Bedryfsinstruksies
3.1 I/O-paneelfunksies
The top I/O panel provides convenient access to essential controls and ports.
- Kragknoppie: Skakel die stelsel aan of af.
- LED-beheerknoppie: Cycles through various ARGB lighting modes for the included fans.
- Herstel-knoppie: Herbegin die stelsel.
- USB 3.0-poorte (x2): Vir hoëspoed-data-oordrag.
- MIC/HD-AUDIO Jacks: Vir die koppeling van oorfone en mikrofone.
Figuur 8: Gedetailleerd view of the top I/O panel with power, LED control, USB 3.0, and audio ports.
3.2 ARGB Fan Control
The included ARGB fans can be controlled either via the dedicated LED button on the I/O panel or synchronized with your motherboard's ARGB software.
- Using the LED Control Button: Press the LED button on the I/O panel to cycle through pre-programmed lighting effects.
- Moederbord-sinchronisasie: To sync with your motherboard, connect the ARGB cables from the fans to a compatible 3-pin 5V ARGB header on your motherboard. Use your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) to control the lighting.
Figure 9: The Antec NX700 case showcasing its vibrant ARGB lighting capabilities.
4. Onderhoud
Regular maintenance helps ensure the longevity and optimal performance of your Antec NX700 case.
- Stoffilters: Periodically clean the dust filters located at the top and bottom of the case. Gently remove them and use compressed air or a soft brush to clear accumulated dust.
- Case Exterior: Vee die buite-oppervlaktes af met 'n sagte, damp lap. Vermy skuurmiddels of oplosmiddels.
- Geharde glaspaneel: Clean the tempered glass panel with a microfiber cloth and a glass cleaner designed for electronics. Avoid excessive force or harsh chemicals.
- Interne skoonmaak: Every few months, open the case and use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.
5. Probleemoplossing
Hierdie afdeling spreek algemene probleme aan wat jy met jou Antec NX700-kas kan teëkom.
5.1 Fans Not Spinning or Lighting Up
- Kragverbinding: Verify that all fan power cables are securely connected to the motherboard fan headers or a fan controller.
- ARGB-verbinding: Ensure ARGB cables are correctly connected to a 3-pin 5V ARGB header on the motherboard or the case's LED controller. Incorrect connection (e.g., to a 4-pin 12V RGB header) can damage the LEDs.
- LED-knoppie funksionaliteit: If using the case's LED button, ensure it is functioning. Try cycling through modes.
- Moederbord sagteware: If using motherboard sync, check your motherboard's ARGB software for fan control and lighting settings.
- Molex Connector: Some fan controllers or hubs may require a Molex connector for power. Ensure this is properly connected to your power supply.
5.2 Geen kragtoevoer na die stelsel nie
- PSU Connection: Ensure the power supply is properly installed and connected to the motherboard and all components. Check that the PSU switch is in the 'ON' position.
- Voorpaneelverbindings: Verify that the front panel power switch cable is correctly connected to the motherboard's front panel header. Refer to your motherboard manual for the correct pinout.
5.3 Missing Motherboard Mounting Stand-offs
While the case includes standard stand-offs, some motherboard layouts (e.g., certain ATX boards) may require additional stand-offs for full support. Ensure all necessary stand-offs are installed to prevent motherboard flex and potential damage.
6. Spesifikasies
Detailed technical specifications for the Antec NX700 Mid-Tower ATX Gaming Case.
| Kenmerk | Spesifikasie |
|---|---|
| Handelsmerk | Antec |
| Reeks | NX700 |
| Model Naam | NX700 |
| Item Modelnommer | 0-761345-81072-2 |
| Soort saak | Mid Tower |
| Moederbordversoenbaarheid | ATX, Mikro ATX, Mini ITX |
| Materiaal | SPCC + Plastic, Tempered Glass |
| Produkafmetings (LxBxH) | 17.32 x 8.66 x 19.37 duim (440 x 220 x 492 mm) |
| Item gewig | 15.84 pond (7.2 kilogram) |
| Aanhangers ingesluit | 2 x 185mm ARGB (Front), 1 x 120mm ARGB (Rear) |
| Ondersteun waaier | 3 x 120 mm / 3 x 140 mm / 2 x 185 mm |
| Top-ondersteuning vir aanhangers | 2 x 120 mm / 2 x 140 mm |
| Agterste waaierondersteuning | 1 x 120 mm / 1 x 140 mm |
| PSU Shroud Fan Support | 2 x 120 mm |
| Ondersteuning van die voorste verkoeler | Tot 360 mm |
| Top Radiator Ondersteuning | Tot 280 mm |
| Agter verkoeler ondersteuning | Tot 140 mm |
| Max CPU Cooler Hoogte | 170 mm |
| Maksimum GPU-lengte | 340 mm |
| Maksimum PSU-lengte | 200mm (with HDD) / 365mm (without HDD) |
| Rybaaie | 2 x 3.5" HDD / 2.5" SSD (convertible), 4 x 2.5" SSD |
| I/O-paneel | Power, LED Control, Reset, 2 x USB 3.0, MIC/HD-AUDIO |
Figure 10: Dimensions of the Antec NX700 Mid-Tower ATX Gaming Case.
Figuur 11: Agter view of the Antec NX700, showing expansion slots and fan mount.
7. Waarborg en Ondersteuning
For warranty information, technical support, or to inquire about replacement parts, please visit the official Antec website or contact Antec customer service. Keep your proof of purchase for warranty claims.
Antec Amptelik Webwebwerf: www.antec.com