Marmitek 8392

Marmitek Stream T2 Pro Bykomende HDMI-sender Gebruikershandleiding

Model: 8392

Produk verbyview

The Marmitek Stream T2 Pro is an additional HDMI transmitter designed to extend the capabilities of your Marmitek Stream S2 Pro system. It enables wireless transmission of HD1080p/60 Hz video and audio signals over a range of up to 20 meters. This device supports various wireless display technologies including AirPlay, Miracast, and DLNA, allowing for flexible content sharing from compatible devices.

Image: Marmitek Stream T2 Pro HDMI Transmitter. This image shows the compact, rectangular transmitter unit with an HDMI connector on one end, a small antenna that can be folded up, and a circular button with an LED indicator on the top surface. The sides feature ventilation holes, and a micro-USB port is visible on one side.

Opstel instruksies

Follow these steps to set up your Marmitek Stream T2 Pro transmitter:

Kragverbinding: Connect the Marmitek Stream T2 Pro to a power source using the provided USB cable. The device can be powered via a USB port on your display or a USB power adapter (not included).
HDMI-verbinding: Plug the HDMI connector of the Stream T2 Pro into an available HDMI input port on your source device (e.g., laptop, game console, media player).
Koppeling met ontvanger: Ensure your Marmitek Stream S2 Pro receiver is powered on and connected to your display. The T2 Pro transmitter should automatically attempt to pair with the S2 Pro receiver. If pairing does not occur automatically, refer to the S2 Pro receiver's manual for manual pairing instructions, which typically involve pressing a pairing button on both units.
Bronkeuse: Select the correct HDMI input on your source device to output the signal to the Stream T2 Pro.
Vertoonkeuse: On your display (TV, projector), select the HDMI input connected to the Stream S2 Pro receiver.

Note: For optimal performance, ensure the transmitter and receiver are within the specified 20-meter range and have a clear line of sight, or minimal obstructions.

Bedien die toestel

Once the Marmitek Stream T2 Pro is successfully paired with its receiver, operation is straightforward:

Outomatiese verbinding: The transmitter will automatically send the HDMI signal from your source device to the paired receiver.
Wireless Display Modes:
- Miracast: For Windows and Android devices, enable Miracast (Wireless Display/Screen Mirroring) and select the Marmitek Stream S2 Pro receiver from the list of available devices.
- AirPlay: For Apple devices (iPhone, iPad, Mac), use the AirPlay feature to mirror your screen or stream content to the Marmitek Stream S2 Pro receiver.
- DLNA: Compatible with various devices and media servers for streaming multimedia content.
LED-aanwyser: The LED indicator on the transmitter provides status information (e.g., solid light for connected, blinking for searching/pairing). Refer to the S2 Pro receiver manual for specific LED patterns.

Onderhoud

To ensure the longevity and optimal performance of your Marmitek Stream T2 Pro, follow these simple maintenance guidelines:

Skoonmaak: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners, aerosols, or abrasive materials.
Berging: Wanneer dit nie vir lang tye gebruik word nie, bêre die toestel op 'n koel, droë plek weg van direkte sonlig en uiterste temperature.
Ventilasie: Maak seker dat die ventilasiegate op die toestel nie geblokkeer is om oorverhitting te voorkom nie.
Hantering: Hanteer die toestel versigtig. Vermy om dit te laat val of aan harde impakte bloot te stel.

Probleemoplossing

If you encounter issues with your Marmitek Stream T2 Pro, consult the following common troubleshooting steps:

Probleem	Moontlike oorsaak	Oplossing
No signal on display.	Incorrect HDMI input selected on source or display. Transmitter not powered. Nie met ontvanger gekoppel nie. Out of range or obstructions.	Verify HDMI input selection on both source and display. Ensure the transmitter is properly powered via USB. Perform pairing procedure as per S2 Pro manual. Reduce distance between transmitter and receiver, remove obstructions.
Intermittent signal or poor quality.	Interferensie van ander draadlose toestelle. Weak signal due to distance or obstructions. Source device resolution incompatibility.	Move the device away from other wireless devices (e.g., Wi-Fi routers, cordless phones). Ensure clear line of sight and reduce distance. Check if source device resolution is supported (up to 1080p/60Hz).
Cannot connect via AirPlay/Miracast.	Device not on the same network (for AirPlay/DLNA). Feature not enabled on source device.	Ensure both the source device and the Stream S2 Pro receiver are connected to the same Wi-Fi network. Enable screen mirroring/wireless display feature on your source device.

Tegniese spesifikasies

Kenmerk	Detail
Handelsmerk	Marmitek
Modelnommer	8392
Produk Tipe	Additional HDMI Transmitter
Maksimum resolusie	HD1080p/60 Hz
Wireless Range	Tot 20 meter
Verbindingstegnologie	USB, HDMI
Connector Tipe	HDMI
Draadlose kommunikasie	Miracast, AirPlay, DLNA
Spesiale kenmerke	Draagbaar
Versoenbare toestelle	Laptops, various source devices with HDMI output
Item gewig	200 gram
Uitset krag	5 Watt
Ondersteunde internetdienste	Browser, Netflix (Note: Functionality depends on paired receiver and source device capabilities.)

Waarborg en Ondersteuning

Specific warranty information for the Marmitek Stream T2 Pro is not available in the provided product details. Please refer to the official Marmitek webwebwerf of u aankoopdokumentasie vir gedetailleerde waarborgbepalings en -voorwaardes.

For technical support, product registration, or further inquiries, please visit the official Marmitek support page or contact their customer service directly. Contact information can typically be found on the manufacturer's webwebwerf of in die oorspronklike produkverpakking.