LEDVANCE 65636

Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual

Model: 65636 | Handelsmerk: LEDVANCE

Belangrike veiligheidsinligting

  • Slegs binnenshuise gebruik: Hierdie produk is ontwerp vir binnenshuise gebruik in droë plekke. Moenie aan water of hoë humiditeit blootstel nie.
  • Elektriese veiligheid: Ensure the power adapter is connected to a suitable power outlet. Do not overload electrical circuits.
  • Sny instruksies: The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
  • Installasie: Ontkoppel altyd krag voor installasie of instandhouding.
  • Hitte: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
  • Kinders: Hou die produk en sy komponente buite bereik van kinders.

Pakketinhoud

Verifieer dat alle komponente in jou pakket teenwoordig is:

  • (2) 16.4ft RGB Flexible LED Light Strips
  • (1) Kragtoevoer
  • (1) IR Remote Controller (with battery included)
  • (20) Montageklemme
Sylvania 32ft RGB Flexible Light Strip Starter Kit components

Image: Main product image showing the light strips, remote, power adapter, and clips.

Opstelling en installasie

  1. Berei die oppervlak voor: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
  2. Verbind komponente: Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
  3. Toetsfunksionaliteit: Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
  4. Customize Length (Optional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
  5. Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
  6. Aktiveer Afstandbeheer: Remove the plastic tab from the remote control's battery door to activate the battery.
Diagram showing connection, cutting points, and mounting of LED strips

Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.

Operasie

The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.

Afstandbeheer funksies:

  • AAN/UIT: Power the light strips on or off.
  • Kleurkeuse: Choose from 16 static colors using the color buttons.
  • verduistering: Adjust the brightness of the selected color or dynamic mode.
  • Dinamiese modusse: Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Diagram of the IR remote control with labeled buttons for colors and modes

Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.

Onderhoud

  • Skoonmaak: Gently wipe the LED strips with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
  • Lewensduur: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
  • Remote Battery Vervanging: If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.

Probleemoplossing

ProbleemMoontlike oorsaakOplossing
Ligte gaan nie aan nie.Power connection issue, remote battery dead, IR receiver blocked.Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction.
Afstandbeheer reageer nie.Remote battery dead, remote too far, IR receiver blocked.Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver.
Some sections of the light strip are not lighting up.Damaged section, incorrect cutting.Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure.

Spesifikasies

KenmerkDetail
Modelnommer65636
HandelsmerkLEDVANCE (Sylvania)
KleurRGB (16 colors) + White
Lengte32ft (2 x 16.4ft strips)
GebruikSlegs binnenshuis
Spesiale kenmerkeColor Changing, Dimmable, Energy Efficient
LigbrontipeLED
KragbronElektries met koord
Tipe beheerderIR-afstandbeheer
Voltage12 Volt
Wattage24 watt
KonnektiwiteitInfrarooi
MateriaalPlastiek
Item gewig10.88 onse
LewensduurTot 30,000 uur
WaterweerstandNie waterbestand nie
UPC046135656361

Waarborg en Ondersteuning

This Sylvania LED Flexible Light Strip Starter Kit is backed by a 1 jaar vervaardiger se waarborg.

For technical support, warranty claims, or additional product information, please visit the official LEDVANCE webwebwerf of kontak hul kliëntediensafdeling.

U kan ook die LEDVANCE Store on Amazon vir meer produkte en inligting.