GHome Smart Light Switch SW5 User Manual

1. Inleiding

This manual provides comprehensive instructions for the installation, setup, and operation of your GHome Smart Light Switch SW5. This single-pole Wi-Fi smart switch allows you to control your lighting remotely via an app or voice commands through compatible smart home assistants.

Figure 1: GHome Smart Light Switch SW5 Product Overview

2. Belangrike veiligheidsinligting

• Elektriese gevaar: Installation requires working with high voltage. Always disconnect power at the circuit breaker before installation or servicing. If you are unsure about electrical wiring, consult a qualified electrician.
• Neutrale draad benodig: This smart switch requires a neutral wire for proper operation. If your house was built or remodeled before the mid-1980s, it may not have a neutral wire. Verify your wiring before installation.
• Wi-Fi-versoenbaarheid: This device operates only on a 2.4GHz Wi-Fi network. It is not compatible with 5GHz Wi-Fi networks.
• Skakelaar tipe: This is a single-pole switch. It is not designed for use as a 3-way or dimmer switch.
• Laaiversoenbaarheid: Not compatible with smart bulbs.
• Sertifiserings: The GHome Smart Light Switch is UL and FCC certified, ensuring quality and safety standards.

Figure 2: Compatibility and Wiring Type Overview

3. Wat is in die boks

• GHome Smart Light Switch (2 units)
• Installation Kit (wire nuts, screws)
• Gebruikershandleiding

4. Spesifikasies

Figure 3: Detailed Dimensions of the Smart Switch

5. Opstelling

5.1 Elektriese installasie

1. Ontkoppel krag: Before starting, turn off the power to the light switch at your circuit breaker to prevent electrical shock.
2. Verwyder ou skakelaar: Carefully remove the existing wall plate and unscrew the old switch from the wall box.
3. Identifiseer Drade: Identify the following wires in your wall box:
   • Live Wire (Hot): Gewoonlik swart.
   • Laai draad: Verbind met die ligtoestel.
   • Neutrale draad: Usually white. (Required for this switch)
   • Gronddraad: Usually green or bare copper.
4. Koppel Nuwe Skakelaar: Connect the wires from the wall box to the corresponding wires on the GHome Smart Light Switch using the provided wire nuts.
   • Koppel die Neutraal wire from the wall box to the white wire on the smart switch.
   • Koppel die Leef wire from the wall box to the black wire on the smart switch.
   • Koppel die Laai wire from the wall box to the red wire on the smart switch.
   • Koppel die Grond wire from the wall box to the green wire on the smart switch.
5. Veilige skakelaar: Gently push the wired smart switch into the wall box and secure it with screws. Attach the new faceplate.
6. Herstel krag: Turn the power back on at the circuit breaker. The indicator light on the switch should begin blinking, indicating it's ready for app pairing.

5.2 App-installasie en -paring

The GHome Smart Light Switch can be controlled via the GHome app. Ensure your mobile device is connected to a 2.4GHz Wi-Fi network before proceeding.

5.2.1 Download the GHome App

1. Soek vir "GHome" in your mobile device's app store (App Store for iOS or Google Play Store for Android).
2. Download and install the GHome app.
3. Maak die toepassing oop en registreer of meld aan by jou rekening.

Figure 4: GHome App Interface

5.2.2 Pairing in EZ Mode (Recommended)

1. Ensure the smart switch is powered on and the indicator light is rapidly blinking. If not, press and hold the reset button on the switch for 5 seconds until it blinks rapidly.
2. In the GHome app, tap the "+" icon on the top right corner to add a device.
3. Select "Switch (Wi-Fi)" from the device list under the Electrician category.
4. Confirm your 2.4GHz Wi-Fi network and enter its password.
5. Select "EZ Mode" (usually the default) and confirm the indicator is rapidly blinking.
6. The app will begin searching for the device. Once found, it will be added to your account.
7. You can rename the switch for easier identification.

5.2.3 Pairing in AP Mode (Alternative)

If EZ Mode fails, you can try AP Mode:

1. Ensure the smart switch is powered on and the indicator light is slowly blinking. If not, press and hold the reset button for 5 seconds until it blinks rapidly, then press and hold again for 5 seconds until it blinks slowly.
2. In the GHome app, tap the "+" icon, select "Switch (Wi-Fi)", and then choose "AP Mode" from the top right corner.
3. Confirm your 2.4GHz Wi-Fi network and enter its password.
4. Go to your phone's Wi-Fi settings (WLAN) and connect to the hotspot named "SmartLife-xxxx".
5. Return to the GHome app and wait for the device to connect.
6. You can rename the switch for easier identification.

5.2.4 Connecting with Google Home

1. Ensure your GHome Smart Light Switch is already paired with the GHome app.
2. Open the Google Home app on your phone.
3. Tap "Get Started" and sign in with your Google account.
4. Go to "Settings" and tap "Add device".
5. Use the search function to find "GHome" and select the GHome app.
6. Click "Agree and link" to link your GHome account with Google Home.
7. Select your GHome Smart Light Switch from the list of devices to add it to Google Home.

5.2.5 Connecting with Amazon Alexa

1. Ensure your GHome Smart Light Switch is already paired with the GHome app.
2. Open the Amazon Alexa app on your phone and sign in.
3. Tap "More" > "Skills & Games" > "Search" button.
4. Type "GHome" and select the GHome skill.
5. Tap "ENABLE TO USE" and then "Agree and link" to link your GHome account with Alexa.
6. Alexa will discover your device. You can then control it using voice commands.

6. Operating Your Smart Switch

6.1 Stembeheer

Once connected to Alexa or Google Assistant, you can control your lights with simple voice commands:

• "Alexa, skakel [Lignaam] aan"
• "Hey Google, skakel [Lignaam] af"

Figuur 5: Stembeheer in aksie

6.2 APP-afstandbeheer

Control your lights from anywhere using the GHome app:

• View the real-time status of your lights.
• Turn lights on or off remotely.

Figure 6: Remote Control via GHome App

6.3 Schedule and Timer Functions

Automate your lighting to fit your daily routine:

• Set daily schedules for lights to turn on/off at specific times.
• Utilize sunrise/sunset automation (e.g., porch lights on 30 minutes after sunset, off 25 minutes before sunrise).

Figure 7: Scheduling and Timer Features

6.4 Groepbeheer

Manage multiple smart switches simultaneously by creating groups within the GHome app.

Figuur 8: Groepbeheerfunksionaliteit

7. Onderhoud

7.1 Firmware-opdaterings

GHome regularly releases firmware updates to optimize stability and user experience. It is recommended to upgrade the firmware to the latest version (e.g., V1.1.3 or newer) by following the prompts in the GHome app.

7.2 Skoonmaak

To clean the smart switch, ensure power is disconnected at the circuit breaker. Use a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.

8. Probleemoplossing

• Skakelaar reageer nie:
  • Kontroleer of die stroombreker aan is.
  • Ensure the switch is properly wired (especially the neutral wire).
  • Verifieer dat jou Wi-Fi-netwerk 2.4 GHz en stabiel is.
  • Try resetting the switch by holding the reset button for 5 seconds.
• Kan nie aan Wi-Fi koppel nie:
  • Confirm your router is broadcasting a 2.4GHz signal.
  • Ensure your phone is connected to the 2.4GHz network during pairing.
  • Move the switch closer to your Wi-Fi router.
  • Try both EZ Mode and AP Mode pairing methods.
  • Dubbelkontroleer jou Wi-Fi-wagwoord.
• Stembeheer werk nie:
  • Ensure the GHome skill/service is enabled and linked in your Alexa or Google Home app.
  • Verify the device name in the GHome app matches the name used in voice commands.
  • Check the internet connection of your smart assistant device.

9. Waarborg en Ondersteuning

9.1 Waarborg

GHome Smart Light Switches typically come with a 12-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

9.2 Kliëntediens

For further assistance or technical support, please refer to the GHome Smart official website or contact their customer service directly. Contact information can usually be found on the product packaging or the GHome Smart webwebwerf.