AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Produk verbyview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Sleutel kenmerke:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedia Access: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Spesifikasies

3. Opstelgids

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Uitpak

1. Verwyder die rekenaarkas versigtig uit sy verpakking.
2. Remove any protective films or internal packaging materials.
3. Plaas die kas op 'n stabiele, plat oppervlak.

3.2 Moederbord installasie

1. Verwyder die sypaneel van die geharde glas deur die duimskroewe los te draai.
2. Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Bevestig die moederbord met die meegeleverde skroewe.

3.3 Kragtoevoerinstallasie

1. Vind die monteringsarea vir die kragtoevoer aan die onderkant van die agterkant van die kas.
2. Slide your power supply unit (PSU) into the designated bay.
3. Bevestig die PSU met skroewe van die agterkant van die kas.

3.4 Installasie van stoorskyf

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Expansion Card (GPU) Installation

1. Verwyder die nodige uitbreidingsgleufdeksels van die agterkant van die kas.
2. Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Verkoelingstelsel

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Kabelbestuur

Gebruik die kabelgeleidingsuitsparings en vasmaakpunte agter die moederbordbak om kabels te organiseer. Dit verbeter lugvloei en estetika.

4. Bedryfsinstruksies

4.1 Aan-/afskakel

• To power on your PC, press the Krag button located on the top panel.
• To power off, either shut down through your operating system or press and hold the Krag knoppie vir 'n paar sekondes.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• USB 3.0-poort (x1): Vir hoëspoed-data-oordrag.
• USB 2.0-poorte (x2): Vir die koppeling van randapparatuur.
• Mikrofoonaansluiting: Vir oudio-invoer.
• HD Audio Jack: For audio output (headphones/speakers).
• Herstel-knoppie: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Onderhoud

Gereelde onderhoud help om optimale werkverrigting en lang lewensduur van jou rekenaarkomponente te verseker.

5.1 Skoonmaak van die stoffilter

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Algemene Skoonmaak

• Vee die buitekant van die kas af met 'n sagte, damp lap. Vermy skuur skoonmakers.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Probleemoplossing

If you encounter issues with your PC case, consider the following common troubleshooting steps:

• Geen krag: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Waaiers draai nie/RGB werk nie: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Oorverhitting: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Voorpaneelpoorte werk nie: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Waarborg en Ondersteuning

7.1 Waarborginligting

The AeroCool HEXFORMBKV2 PC case comes with a 2 jaar waarborg for parts. Please retain your proof of purchase for warranty claims.

7.2 Tegniese Ondersteuning

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's webwebwerf of in die produkverpakking.

• AeroCool Official Webwebwerf: www.aerocool.io
• Kliëntediens -e -pos: support@aerocool.io (Bvample, please verify on official webwerf)