Berdsen BD-520 Compressor Dehumidifier

Inleiding

This manual provides essential information for the safe and efficient operation of your Berdsen BD-520 Compressor Dehumidifier. Please read it thoroughly before first use and retain it for future reference. The BD-520 is designed to reduce excess humidity in indoor environments, helping to prevent mold, mildew, and unpleasant odors, thereby improving air quality and comfort.

The Berdsen BD-520 operates on the condensation principle, effectively removing moisture from the air. It features an antibacterial particulate filter, automatic defrost function, and a user-friendly control panel with an LCD display.

Veiligheidsinstruksies

• Maak altyd seker dat die ontvochtiger op 'n stabiele, gelyk oppervlak geplaas word.
• Moenie die luginlaat of -uitlaat blokkeer nie. Handhaaf ten minste 20 cm speling rondom die eenheid.
• Do not operate the unit near heat sources or in direct sunlight.
• Maak seker dat die kragtoevoer ooreenstem met die spesifikasies op die graderingsetiket.
• Moenie die eenheid, kragkabel of prop in water of ander vloeistowwe dompel nie.
• Ontkoppel die eenheid voor skoonmaak, onderhoud of wanneer dit nie gebruik word nie.
• Hou buite bereik van kinders en troeteldiere.
• As die kragkoord beskadig is, moet dit deur die vervaardiger, sy diensagent of soortgelyke gekwalifiseerde persone vervang word om 'n gevaar te vermy.
• Hierdie toestel gebruik R290-koelmiddel, wat vlambaar is. Hanteer versigtig en verseker behoorlike ventilasie.

Produk verbyview

Opstelling

1. Uitpak: Verwyder die ontvochtiger versigtig uit sy verpakking. Bewaar die verpakking vir toekomstige berging of vervoer.
2. Plasing: Place the unit upright on a firm, level surface. Ensure there is at least 20 cm of space around the air inlet (rear) and outlet (front) for proper airflow. The unit is equipped with wheels and handles for easy movement. It is suitable for rooms up to 60 m³.
3. Kragverbinding: Steek die kragkabel in 'n geaarde elektriese aansluiting wat ooreenstem met die voltagsoos gespesifiseer op die eenheid se graderingsetiket.
4. Watertenk: Ensure the water tank is correctly inserted into the unit. For continuous drainage, refer to the 'Continuous Drainage' section.

Bedryfsinstruksies

The control panel is located on the top of the unit and features an LCD display and several buttons for easy operation.

Beheerpaneel funksies:

• Kragknoppie: Skakel die eenheid AAN of AF.
• Humidity Setting Button (%): Allows you to set the desired humidity level between 30% and 80%. The unit will operate until this level is reached and then cycle on/off to maintain it. The LCD display shows the current room humidity.
• Mode Button (Water Droplets): Switches between Dehumidification and Ventilation modes.
• Timer Button (Clock Icon): Sets the operating timer for up to 12 hours.

Bedryfsmodusse:

• Ontvochtigingsmodus: The compressor and fan operate to remove moisture from the air. The unit will automatically stop when the set humidity level is reached or the water tank is full.
• Ventilasiemodus: The fan operates without the compressor, circulating air without removing moisture. This mode is automatically activated when the water tank is full.

Outomatiese funksies:

• Automatic Shut-off (Full Water Tank): When the 2.2-liter water tank is full, the compressor will automatically stop, and the unit will switch to ventilation mode. An audible signal will alert you. Empty the tank and reinsert it to resume dehumidification.
• Outomatiese ontdooiing: The unit features an automatic defrost function to prevent ice buildup on the evaporator coils, ensuring efficient operation in cooler environments (minimum operating temperature 5°C).

Deurlopende dreinering:

For extended operation without needing to empty the water tank, connect the included drainage hose. Locate the continuous drainage outlet on the back of the unit (refer to Figure 5). Attach the hose and direct the other end into a suitable drain, such as a floor drain, large bucket, or sink. Ensure the hose is positioned downwards to allow gravity to drain the water.

Onderhoud

Maak die watertenk leeg:

When the water tank is full, the unit will alert you and switch to ventilation mode. Carefully pull out the water tank, empty the collected water, and slide it back into place until it clicks securely. The unit will then resume normal operation.

Skoonmaak van die lugfilter:

The dehumidifier is equipped with a washable antibacterial particulate filter. Regular cleaning is essential for optimal performance and air quality.

1. Skakel die ontvochtiger af en koppel dit uit.
2. Remove the air filter from its housing (typically located at the rear or side air intake).
3. Clean the filter using a vacuum cleaner to remove dust and debris. For more thorough cleaning, wash it gently with lukewarm water and a mild detergent.
4. Rinse the filter thoroughly and allow it to air dry completely before reinserting it into the unit. Do not use the unit without a dry filter.

Skoonmaak van die buitekant:

Vee die buitekant van die eenheid af met 'n sagte, damp lap. Moenie skuurmiddels, oplosmiddels of harde chemikalieë gebruik nie, aangesien dit die oppervlak kan beskadig.

Probleemoplossing

If you encounter issues with your Berdsen BD-520 dehumidifier, please consult the following table before contacting customer support.

Spesifikasies