Juskys Basic Heavy-Duty Metal Storage Shelves (Set of 2)

Inleiding

Thank you for choosing the Juskys Basic Heavy-Duty Metal Storage Shelves. This set of two robust shelving units is designed to help you organize your cellar, garage, workshop, or storage room efficiently. Each unit features five sturdy MDF wood shelves, providing ample space for various items such as garden accessories, tools, supplies, or documents. The boltless plug-in system ensures quick and easy assembly without the need for drilling or screws.

Veiligheidsinstruksies

• Lees alle instruksies sorgvuldig deur voor montering en gebruik.
• Maak seker dat alle komponente teenwoordig en onbeskadig is voordat met montering begin word.
• Assemble the shelving unit on a flat, stable surface.
• Always distribute weight evenly across the shelves. Do not overload individual shelves.
• Secure the shelving unit to a wall if there is any risk of tipping, especially in areas with children or pets.
• Wear appropriate safety gear, such as gloves, during assembly to prevent cuts from metal edges.
• Hou klein dele weg van kinders om verstikkingsgevare te voorkom.

Pakketinhoud

Your Juskys Basic Heavy-Duty Metal Storage Shelves package should contain the following components for two complete shelving units:

• Metal uprights and crossbars (galvanized steel)
• 10 x MDF wood shelves (5 per unit)
• 16 x Plastic protective feet (8 per unit)
• Monteringsinstruksies (hierdie handleiding)

As enige onderdele ontbreek of beskadig is, kontak asseblief kliëntediens.

Opstelling en samestelling

The Juskys Basic shelving units feature a practical boltless plug-in system, allowing for quick and easy assembly without the need for drilling or screws. A rubber mallet (not included) may be helpful to secure connections.

1. Berei die komponente voor: Unpack all parts and lay them out. Identify the uprights, crossbars, and MDF shelves.
2. Stel die raam bymekaar: Begin by connecting the uprights with the shorter crossbars to form the base frame. Ensure the tabs on the crossbars align with the slots on the uprights. Gently tap with a rubber mallet to secure.
3. Installeer onderste rakke: Once the base frame is stable, insert the first MDF shelf. This adds rigidity to the structure.
4. Bou opwaarts: Continue adding upright sections and crossbars, securing them with a mallet. Insert MDF shelves as you go, or after the frame is complete.
5. Pas rakhoogte aan: The shelves can be adjusted to your desired height by repositioning the crossbars in the upright slots. Ensure all four crossbars for a single shelf are at the same height.
6. Attach Plastic Feet: Place the plastic protective feet onto the bottom of the uprights to protect your floor from scratches.
7. Veelvuldige konfigurasies: Each shelving unit can be assembled as a tall, single unit (180 cm high) or as two half-height units (e.g., 90 cm high) that can be used as workbenches or separate storage.

Bedryfsinstruksies

• Laai tans: Place items on the shelves, ensuring weight is distributed evenly. Avoid concentrating heavy loads in one small area.
• Gewig kapasiteit: Each MDF shelf can hold up to 175 kg (385 lbs) when the weight is evenly distributed. The total capacity for the set of two units is 1750 kg (3858 lbs).
• Stabiliteit: For maximum stability, place heavier items on lower shelves.
• Verstel rakke: To adjust shelf height, carefully unload the shelf, detach the crossbars, reposition them in the desired slots, and re-secure. Ensure all four crossbars for a shelf are at the same level.

Onderhoud

• Skoonmaak: Wipe the metal frame and MDF shelves with a damp lap. Vermy skuurmiddels of harde chemikalieë wat die afwerking kan beskadig.
• Inspeksie: Kontroleer gereeld alle verbindings om te verseker dat hulle stewig bly. Tik weer met 'n rubberhamer as enige verbindings los voel.
• Omgewing: While the metal frame is galvanized, prolonged exposure to high humidity or moisture can affect the MDF shelves. Store in a dry environment.

Probleemoplossing

• Shelf is unstable: Ensure all crossbars are fully seated in the upright slots. Use a rubber mallet to tap connections firmly. Verify the unit is on a level surface.
• Moeilikheid met montering: Ensure components are correctly oriented. The boltless system requires firm tapping with a rubber mallet to fully engage the tabs into the slots.
• MDF shelves bowing: This indicates overloading. Reduce the weight on the shelf and ensure weight is evenly distributed.

Spesifikasies

Waarborg inligting

Juskys products are manufactured to high-quality standards. For specific warranty details regarding your Basic Heavy-Duty Metal Storage Shelves, please refer to the purchase documentation or contact Juskys customer service directly. Keep your proof of purchase for any warranty claims.

Kliënte ondersteuning

Should you have any questions, require assistance with assembly, or encounter any issues with your Juskys Basic Heavy-Duty Metal Storage Shelves, please do not hesitate to contact Juskys customer support. You can typically find contact information on the Juskys official webwebwerf of deur jou kleinhandelaar.

For more information, visit the official Juskys webwebwerf: www.juskys.de