1. Produk verbyview
Thank you for choosing the Arlux Lighting Onyx R2 Round Recessed LED Spot Light. This product is designed for indoor use, providing efficient and modern illumination. This manual provides essential information for the safe installation, operation, and maintenance of your new LED spot light.
Veiligheidsinligting
- Lees alle instruksies noukeurig voor installasie en gebruik.
- Installasie moet deur 'n gekwalifiseerde elektrisiën uitgevoer word in ooreenstemming met plaaslike elektriese kodes en regulasies.
- Ensure the power supply is disconnected at the main circuit breaker before installation, maintenance, or cleaning.
- Moenie die produk op enige manier wysig nie. Ongemagtigde wysigings kan die waarborg ongeldig maak en veiligheidsrisiko's inhou.
- Hierdie produk is slegs vir binnenshuise gebruik ontwerp. Moenie aan vog of uiterste temperature blootstel nie.
- Moenie direk in die LED-ligbron kyk wanneer dit brand nie, aangesien dit oogspanning of skade kan veroorsaak.
- Hou verpakkingsmateriaal buite bereik van kinders.
2. Pakketinhoud
Verifieer dat alle komponente teenwoordig en onbeskadig is voordat u met die installasie voortgaan.
- 1 x Arlux Lighting Onyx R2 Round Recessed LED Spot Light
- 1 x LED Driver (Power Supply)
- Monteer hardeware
Image 2.1: The Arlux Lighting Onyx R2 Recessed LED Spot Light shown with its separate LED driver (power supply) and connecting cable.
3. Spesifikasies
| Handelsmerk | Arlux Lighting |
| Model | Onyx R2 |
| Tik | Recessed LED Spot Light |
| Vorm | Ronde |
| Kragverbruik | 18 Watt |
| Ligvloed | 1550 Lumen |
| Kleur temperatuur | 4000 Kelvin (Neutraal Wit) |
| Materiaal | Aluminium |
| Kleur | Wit |
| Item gewig | 390 gram |
| Installasie tipe | Plafonbevestiging (Ingebou) |
| Kragbron | Elektries met koord |
| Spesifieke gebruike | Ceiling illumination for indoor spaces |
4. Opstelling en installering
4.1 Kontrolelys voor installasie
- Gereedskap benodig: Drill, hole saw (appropriate diameter for recess), wire strippers, screwdriver, voltage toetser.
- Kragtoevoer: Ensure the electrical circuit is compatible with the spot light's power requirements (18W).
- Ceiling Space: Verify sufficient clearance above the ceiling for the fixture and driver.
- Veiligheid eerste: Always turn off the main power supply at the circuit breaker before starting any electrical work.
4.2 Installasiestappe
- Berei die plafon voor: Using an appropriate hole saw, cut a circular opening in the ceiling at the desired installation location. Refer to the product specifications for the exact cutout diameter (typically around Ø200-210mm for a Ø225mm fixture).
- Connect the Driver: Connect the AC input wires from your household electrical supply to the input terminals of the LED driver. Ensure correct polarity (Live, Neutral, Earth) as indicated on the driver. Secure connections firmly.
- Connect the Spot Light: Plug the DC output cable from the LED driver into the corresponding input port on the back of the Onyx R2 spot light. This connection is typically a simple plug-and-play connector.
- Insert the Spot Light: Gently push the spring clips on the sides of the spot light upwards and insert the fixture into the prepared ceiling opening. The spring clips will hold the light securely in place.
- Finale kontrole: Ensure the spot light is flush with the ceiling surface and securely mounted.
- Herstel krag: Skakel die hoofkragtoevoer weer aan by die stroombreker.
Image 4.1: The Arlux Lighting Onyx R2 Recessed LED Spot Light shown installed flush within a ceiling, providing ambient lighting.
5. Bedryfsinstruksies
The Arlux Lighting Onyx R2 Recessed LED Spot Light operates immediately upon receiving power. It is typically controlled by a standard wall switch connected to the electrical circuit.
- Skakel aan/af: Gebruik die muurskakelaar wat aan die ligtoestel gekoppel is om die lig aan of af te skakel.
- verduistering: This model is not specified as dimmable. Attempting to use it with a non-compatible dimmer switch may cause damage or malfunction.
6. Onderhoud
The Arlux Lighting Onyx R2 LED Spot Light requires minimal maintenance.
- Skoonmaak: Maak seker dat die krag afgeskakel is voordat jy skoonmaak. Vee die oppervlak van die lig af met 'n sagte, droë of effens klam lap.amp lap. Moenie skuurmiddels, oplosmiddels of harde chemikalieë gebruik nie, aangesien dit die afwerking of elektriese komponente kan beskadig.
- LED-langslewendheid: LED lights have a long lifespan and do not require bulb replacement. If the light stops functioning, refer to the troubleshooting section.
7. Probleemoplossing
If you encounter issues with your Arlux Lighting Onyx R2 LED Spot Light, please consult the following table before contacting support.
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Lig gaan nie aan nie | Geen kragtoevoer Los bedrading konneksie Foutiewe LED-bestuurder Faulty light fixture | Kontroleer die stroombreker en muurskakelaar. Verifieer dat alle bedrading stewig is (skakel eers die krag af). Test the driver if possible, or replace it. If driver is functional, the fixture may be faulty; contact support. |
| Ligte flikkerings | Onstabiele kragtoevoer Los bedrading Incompatible dimmer switch (if used) | Ensure stable power. Check for loose connections. Remove dimmer switch if not compatible, or replace with a compatible LED dimmer. |
| Lig is dof | Verkeerde kragbron Voltage druppel | Ensure the correct LED driver is used. Consult an electrician to check for voltage issues in your electrical system. |
8. Waarborg en Ondersteuning
Information regarding specific warranty terms for the Arlux Lighting Onyx R2 Round Recessed LED Spot Light is not available in the provided product details. For warranty inquiries or technical support, please contact your retailer or the manufacturer directly.
Spare parts availability information is also not available. Please contact your point of purchase for assistance with replacement components.