PowerSmart 36V Li-ion Battery Instruction Manual

Inleiding

This manual provides essential instructions for the safe and efficient use of your PowerSmart 36V Li-ion battery. This battery is designed for compatibility with specific Hitachi power tools. Please read this manual thoroughly before initial use and retain it for future reference.

Sleutel kenmerke:

• Batterytipe: Li-ion
• Voltage: 36.00 V
• Capacity Options: 3000 mAh / 4000 mAh / 5000 mAh
• Afmetings: 130.50 x 93.40 x 116.45 mm
• Belangrike nota: This battery is exclusively compatible with Hitachi power tools and is NOT compatible with Hitachi lawnmowers.

Veiligheidsinligting

Always observe the following safety precautions to prevent injury or damage to the battery and tools:

• Moenie batterypakke uitmekaar haal, oopmaak of versnipper nie.
• Moenie die battery aan hitte of vuur blootstel nie. Vermy berging in direkte sonlig.
• Moenie 'n batterypak kortsluit nie.
• Moenie batterypakke aan meganiese skok onderwerp nie.
• Indien 'n battery lek, moenie toelaat dat die vloeistof in kontak kom met die vel of oë nie. Indien kontak gemaak is, was die aangetaste area met oorvloedige hoeveelhede water en raadpleeg 'n dokter.
• Hou batterypakke skoon en droog.
• Moenie enige ander laaier gebruik as wat spesifiek voorsien is vir gebruik met die toerusting nie.
• Moenie enige batterypak gebruik wat nie ontwerp is vir gebruik met die toerusting nie.
• Hou batterypakke buite bereik van kinders.
• Dispose of used battery packs promptly and according to local regulations.
• This battery is designed for use with Hitachi power tools only. Do not attempt to use it with other brands or types of equipment, especially lawnmowers.

This image illustrates the PowerSmart 36V Li-ion battery and explicitly states its incompatibility with Hitachi lawnmowers, emphasizing its use solely with Hitachi power tools.

Opstelling en aanvanklike laai

Before first use, fully charge the battery pack. Use only the charger specified by the manufacturer for this battery model.

1. Inspekteer die battery: Before charging or use, visually inspect the battery for any signs of damage, cracks, or leaks. Do not use a damaged battery.
2. Steek in laaier in: Align the battery with the charger's terminals and slide it into place until it clicks securely.
3. Koppel laaier: Plug the charger into a suitable power outlet. The charger's indicator light will show the charging status.
4. Vol lading: Allow the battery to charge completely. Refer to your charger's manual for specific charging times and indicator light meanings.
5. Verwyder van laaier: Sodra dit ten volle gelaai is, ontkoppel die laaier van die kragaansluiting en verwyder die battery.

A view of the PowerSmart 36V Li-ion battery, highlighting its robust casing and the interface for connecting to compatible Hitachi tools or chargers.

Gedetailleerd view of the battery's terminal interface, indicating the various contact points for power and communication with the tool or charger.

Bedryfsinstruksies

This battery is designed to power compatible Hitachi 36V power tools. Always refer to your tool's instruction manual for specific operating procedures.

1. Plaas battery in: Align the fully charged battery with the battery slot on your Hitachi power tool. Slide the battery into the tool until it locks securely into place. Ensure it is firmly seated to prevent accidental disconnection during operation.
2. Gaan versoenbaarheid na: Double-check that your tool is one of the compatible Hitachi models listed (e.g., 36DAL, BSL 36, BSL 3620, BSL 3626, BSL 3626X, BSL 3630, CG 36DAL, DH 36DAL, ML 36DAL, RB 36DL, RP3608DB).
3. Power On Tool: Operate the tool according to its specific instructions.
4. Batteryvlak: Some tools or batteries may have an indicator to show the remaining charge. Monitor this to avoid unexpected power loss.
5. Verwyder battery: To remove the battery, press the release button(s) on the tool and slide the battery out.

Warning: Do not force the battery into a tool if it does not fit easily. This indicates incompatibility and could damage both the battery and the tool.

Onderhoud en berging

Proper maintenance and storage will extend the life of your PowerSmart battery.

• Laai: Recharge the battery when its performance begins to diminish. Avoid completely draining the battery frequently, as this can reduce its lifespan.
• Skoonmaak: Keep the battery terminals clean and free of dirt or debris. Use a dry cloth to wipe the battery casing. Do not use liquids or solvents.
• Berging:
  • Bêre die battery op 'n koel, droë plek, weg van direkte sonlig en uiterste temperature.
  • For long-term storage, it is recommended to store Li-ion batteries at approximately 50% charge.
  • Do not store the battery in a discharged state for extended periods.
  • Hou die battery weg van metaalvoorwerpe wat die terminale kan kortsluit.
• Beskikking: Do not dispose of batteries in household waste. Recycle them at designated collection points according to local environmental regulations.

Probleemoplossing

If you encounter issues with your PowerSmart battery, refer to the following common solutions:

Indien probleme voortduur nadat u hierdie oplossings probeer het, kontak asseblief kliëntediens.

Spesifikasies

Waarborg inligting

Specific warranty details for PowerSmart products may vary. Please refer to the product packaging or the official PowerSmart website for the most accurate and up-to-date warranty information. Typically, batteries come with a limited warranty covering manufacturing defects.

Bewaar u bewys van aankoop vir enige waarborgaansprake.

Kliënte ondersteuning

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact PowerSmart customer support.

Contact information can usually be found on the product packaging, the PowerSmart official webwebwerf, of deur jou kleinhandelaar.

When contacting support, please have your product model number (THT025.25R_1) and purchase date ready.