ABB AD1NO-R-15m Modular Device Switch User Manual

1. Inleiding

The ABB AD1NO-R-15m is an analog time switch designed for daily scheduling with a 15-minute switching interval. This modular device features one normally open (NO) channel and includes a power reserve function to maintain timekeeping during power outages. It is suitable for various electrical scheduling applications.

Figuur 1: Voorkant view of the ABB AD1NO-R-15m Modular Device Switch, highlighting its compact design and control interface.

2. Belangrike veiligheidsinstruksies

Please read and understand all safety instructions before installing, operating, or maintaining this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Installasie en onderhoud moet slegs deur gekwalifiseerde personeel uitgevoer word.
• Disconnect power before installation, maintenance, or servicing to prevent electric shock.
• Ensure all wiring complies with local and national electrical codes and regulations.
• Moenie die toestel gebruik as dit beskadig lyk nie.
• Hierdie toestel is ontwerp vir binnenshuise gebruik in droë omgewings.

3. Produk verbyview

The AD1NO-R-15m is an analog time switch with the following key features:

• Analoog skakelaar: For setting daily schedules.
• 15-Minute Switching: Allows precise control over connected circuits with 15-minute intervals.
• 1 Normally Open (NO) Channel: Beheer een elektriese stroombaan.
• Kragreserwe: Maintains timekeeping for a specified duration during power interruptions.
• Modulêre ontwerp: Suitable for integration into standard electrical panels on a DIN rail.

Note: The power reserve ensures the timer continues to function accurately even if the main power supply is temporarily lost.

4. Opstelling en installering

Follow these steps for proper installation of the AD1NO-R-15m Modular Device Switch:

1. Kragontkoppeling: Before beginning, ensure the main power supply to the installation area is completely disconnected at the circuit breaker or fuse box. Verify with a voltage toetser.
2. Montering: Mount the AD1NO-R-15m switch onto a standard DIN rail within an appropriate electrical enclosure. Ensure it is securely fastened.
3. Bedrading:
   • Connect the incoming phase (L) and neutral (N) wires to the designated input terminals of the time switch.
   • Connect the load wire from the output terminal of the time switch to the device you wish to control.
   • Ensure all connections are tight and secure. Refer to the wiring diagram printed on the device for specific terminal identification.
4. Kragherstel: Once all connections are verified and secure, close the electrical enclosure and restore power to the circuit.

Always consult a qualified electrician for installation if you are unsure or lack experience with electrical wiring.

5. Bedryfsinstruksies

To set the time and program the switching schedule:

1. Stel huidige tyd: Rotate the analog dial clockwise until the current time aligns precisely with the reference arrow or marker on the device's face.
2. Program Switching Times: The dial features small segments around its perimeter. Push in the segments corresponding to the times you want the connected circuit to be ON. Pull out segments for OFF periods. Each segment typically represents a 15-minute interval.
3. Operating Mode (if applicable): If your model includes a manual override switch (e.g., ON, AUTO, OFF), ensure it is set to "AUTO" for programmed operation.

The internal power reserve will automatically charge when the device is powered, ensuring continued accurate timekeeping during short power outages.

6. Onderhoud

The AD1NO-R-15m is designed for minimal maintenance. Follow these guidelines to ensure optimal performance:

• Skoonmaak: Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners, abrasive materials, or solvents.
• Inspeksie: Periodically inspect the wiring connections for tightness and any signs of wear, corrosion, or damage. Ensure all terminals are secure.
• Omgewingstoestande: Maak seker dat die bedryfsomgewing binne die gespesifiseerde temperatuur- en humiditeitsreekse bly om skade te voorkom.

There are no user-serviceable parts inside this device. Do not attempt to open the casing, as this will void the warranty and may expose you to electrical hazards.

7. Probleemoplossing

If you encounter issues with your AD1NO-R-15m switch, refer to the table below for common problems and solutions:

If the problem persists after attempting these solutions, please contact ABB customer support for further assistance.

8. Tegniese spesifikasies

• Model: AD1NO-R-15m
• Onderdeelnommer: 2CSM222461R1000
• Vervaardiger: FIG
• Tipe: Analoog tydskakelaar
• Switching Interval: 15 minute
• Kanale: 1 Normaalweg oop (NEE)
• Kragreserwe: Ja
• Item gewig: Ongeveer 2.82 onse (80 gram)
• Produk afmetings: Ongeveer 3.54 x 0.69 x 2.6 duim (90 x 17.5 x 66 mm)
• Montage tipe: DIN Rail (Wall Mount)
• Ingesluit komponente: Modular device switch
• Batterye benodig: No (features internal power reserve)
• ASIN: B09BP4PFMF
• Eerste beskikbaar: 21 Desember 2024

Let wel: Spesifikasies is onderhewig aan verandering sonder vooraf kennisgewing.

9. Waarborg en Ondersteuning

Waarborg inligting

For detailed warranty terms and conditions, please refer to the official ABB warranty statement provided with your purchase or visit the official ABB webwebwerf. Bewaar u bewys van aankoop vir waarborgeise.

Kliënte ondersteuning

For technical assistance, troubleshooting, or service inquiries, please contact ABB customer support through their official webwebwerf of die kontakinligting wat in u produkverpakking verskaf word.

ABB-amptenaar Webwebwerf: www.abb.com