GLIDiC SB-WS91-MRTW/BK TW-9000 Volledig Draadlose Oorfone Gebruikershandleiding

Inleiding

This manual provides detailed instructions for the GLIDiC SB-WS91-MRTW/BK TW-9000 Fully Wireless Earphones. Please read this guide thoroughly before using your device to ensure proper operation and to maximize its lifespan. Keep this manual for future reference.

Image: The GLIDiC SB-WS91-MRTW/BK TW-9000 fully wireless earphones, shown with their charging case. The earphones are black and feature the GLIDiC logo. The charging case is also black and has an open lid, revealing the earbud compartments.

Opstelling

Pakketinhoud

Maak seker dat alle items in die pakket teenwoordig is:

• GLIDiC SB-WS91-MRTW/BK TW-9000 Earphones (Left and Right)
• Draadlose laaikas
• USB-laaikabel
• Gebruikershandleiding (hierdie dokument)

Laai die oorfone en omhulsel

Before first use, fully charge the earphones and the charging case. The case can be charged via the included USB cable or wirelessly.

1. Plaas die oorfone in die laaikas en maak seker dat hulle korrek geplaas is.
2. Bedraad laai: Connect the USB charging cable to the charging port on the case and to a USB power adapter (not included) or a computer's USB port.
3. Draadlose laai: Place the charging case on a compatible Qi-certified wireless charging pad.
4. The indicator lights on the case will show the charging status. Refer to the LED indicator section for details.

Image: The GLIDiC SB-WS91-MRTW/BK TW-9000 charging case with earphones inside, placed on a wireless charging pad. A USB cable is connected to the pad. The setup is on a table with breakfast items in the background, illustrating everyday use.

Aanvanklike Bluetooth-paring

Follow these steps to pair your earphones with a new device for the first time:

Image: A diagram illustrating the pairing procedure for the GLIDiC SB-WS91-MRTW/BK TW-9000 earphones. It shows two main sections: "First Pairing" and "Pairing with a second device or later". For first pairing, it depicts taking the earphones out of the case, which automatically enters pairing mode. For subsequent pairings, it shows pressing and holding the multi-function button on either the left or right earphone for 5 seconds while in standby mode to enter pairing mode.

1. Open the charging case and remove both the left and right earphones. They will automatically enter pairing mode.
2. Gaan na die Bluetooth-instellings op jou toestel (slimfoon, tablet, skootrekenaar).
3. Soek vir beskikbare toestelle en kies "GLIDiC TW-9000" uit die lys.
4. Once connected, a confirmation sound or message will indicate successful pairing.

Pairing with a Second Device or Later

To pair with another device or re-pair after initial setup:

1. Ensure the earphones are in standby mode (not connected to another device).
2. Press and hold the multi-function button on either the left (L) or right (R) earphone for approximately 5 seconds until the indicator light flashes, indicating pairing mode.
3. On your device, go to Bluetooth settings and select "GLIDiC TW-9000" to connect.

Bediening van die oorfone

Krag aan/af

• Krag aan: Verwyder die oorfone uit die laaikas. Hulle sal outomaties aanskakel.
• Skakel af: Plaas die oorfone terug in die laaikas. Hulle sal outomaties afskakel en begin laai.

Dra die oorfone

Insert the earphones gently into your ears, ensuring a comfortable and secure fit. Adjust them until the sound quality is optimal and external noise is minimized. The correct fit is crucial for effective Active Noise Cancellation.

Kontroles

The GLIDiC TW-9000 earphones feature touch controls and support voice control for various functions. Specific touch gestures and voice commands may vary. Refer to the quick start guide or manufacturer's website for detailed control mappings.

• Speel/pouse: Typically a single tap on either earphone.
• Volgende snit: Often a double tap on the right earphone.
• Vorige snit: Often a double tap on the left earphone.
• Beantwoord/beëindig oproep: Enkele tik tydens 'n inkomende oproep.
• Aktiveer stemassistent: Long press or specific tap sequence.

Aktiewe ruisonderdrukking (ANC)

The earphones are equipped with Active Noise Cancellation to reduce ambient noise. This feature can be toggled on or off, or switched to an ambient sound mode, typically through a specific touch control gesture. Consult the detailed control instructions for your model.

Onderhoud

Skoonmaak

Gereelde skoonmaak help om klankgehalte en higiëne te handhaaf.

• Gebruik 'n sagte, droë, pluisvrye lap om die oorfone en laaikas af te vee.
• Vir hardnekkige vuiligheid, effens dampen the cloth with water or a mild, non-abrasive cleaner. Avoid getting moisture into openings.
• Clean the ear tips regularly. If removable, they can be washed with mild soap and water, then thoroughly dried before reattaching.
• Moenie harde chemikalieë, alkohol of skuurmiddels gebruik nie.

Berging

Wanneer dit nie gebruik word nie, bêre die oorfone in hul laaikassie om hulle teen stof en skade te beskerm en om hulle gelaai te hou.

Battery sorg

Om die batterylewe te verleng:

• Vermy die gereelde volle ontlading van batterye.
• Bêre die toestel op 'n koel, droë plek weg van uiterste temperature.
• If storing for an extended period, charge the case and earphones to about 50% capacity.

Probleemoplossing

As jy probleme ondervind, probeer die volgende oplossings:

Geen klank of onderbroke verbinding

• Maak seker dat oorfone gelaai is.
• Maak seker dat Bluetooth op jou toestel geaktiveer is en dat die oorfone gekoppel is.
• Move the earphones closer to your device and away from potential interference sources (e.g., Wi-Fi routers, other Bluetooth devices).
• Probeer om die oorfone met jou toestel te ontkoppel en weer te koppel.
• Herbegin jou oudiobrontoestel.

Oorfone laai nie

• Maak seker dat die laaikabel stewig aan beide die kas en die kragbron gekoppel is.
• Indien jy draadlose laai gebruik, maak seker dat die houer korrek op die laaiblad geplaas is.
• Check for any debris in the charging port of the case or on the earphone charging contacts.
• Probeer 'n ander laaikabel of kragadapter.

One Earphone Not Working

• Place both earphones back into the charging case, close the lid, wait a few seconds, then remove them.
• Maak seker dat beide oorfone gelaai is.
• Perform a factory reset if the issue persists (refer to manufacturer's webwebwerf vir spesifieke instruksies).

Spesifikasies

Waarborg en Ondersteuning

For warranty information and technical support, please refer to the warranty card included with your product or visit the official GLIDiC webwebwerf. Bewaar u bewys van aankoop vir waarborgeise.

If you require further assistance, please contact GLIDiC customer service through their official channels.