XTOOL TP150 TPMS Herleer Gereedskap Gebruikershandleiding

1. Inleiding

The XTOOL TP150 is a professional Tire Pressure Monitoring System (TPMS) tool designed for comprehensive TPMS service. It supports activation, relearning, programming of XTOOL sensors, and diagnostic functions for TPMS systems. This manual provides detailed instructions for the proper use and maintenance of your TP150 device.

2. Veiligheidsinligting

Always observe the following safety precautions when operating the TP150 tool:

• Lees alle instruksies noukeurig voor gebruik.
• Moenie die gereedskap in nat toestande of naby vlambare vloeistowwe/gasse gebruik nie.
• Maak seker dat die voertuig se ontsteking afgeskakel is voordat die OBDII-kabel gekoppel of ontkoppel word.
• Use only the accessories and parts specified by XTOOL.
• Hou die gereedskap weg van kinders.
• Properly dispose of old TPMS sensors and batteries according to local regulations.

3. Produk verbyview

The XTOOL TP150 TPMS tool is a handheld device equipped with a user-friendly interface. It comes with two 315/433MHz dual-frequency sensors for programming.

Image: The XTOOL TP150 device, two XTOOL TPMS sensors, and their protective yellow carrying case.

3.1. Sleutel kenmerke

• TPMS Activation: Activates all known OE and aftermarket TPMS sensors.
• TPMS Herleer: Supports OBD Relearn and Static Relearn for all sensors.
• TPMS-programmering: Programs XTOOL 315/433MHz sensors with four methods: Automatic ID Generation, Manual ID Entry, Copy ID by Activating, and Read ECU Copy ID.
• TPMS-diagnose: Reads and clears TPMS Diagnostic Trouble Codes (DTCs), resets TPMS warning light.
• Vertoon van intydse data: Shows sensor ID, tire pressure, temperature, and sensor voltage.
• OE Sensor Information Check: Displays brand, part number, and frequency of OE sensors.

4. Opstelling

4.1. Aanvanklike toestelopstelling

1. Pak uit: Carefully remove the TP150 tool and accessories from the packaging.
2. Krag aan: Druk die kragknoppie om die toestel aan te skakel.
3. Sagteware-opdatering: It is highly recommended to update the device software to the latest version before first use. Connect the device to a computer with internet access and follow the update instructions provided on the XTOOL official website or through the device's update menu. (Note: Some functionalities may not work correctly without the latest software.)

4.2. Verbinding met Voertuig

1. Vind die voertuig se OBDII-poort, gewoonlik onder die paneelbord aan die bestuurderskant.
2. Maak seker dat die voertuig se ontsteking in die AF-posisie is.
3. Connect the OBDII cable from the TP150 tool to the vehicle's OBDII port.
4. Turn the vehicle's ignition to the ON position (engine off). The TP150 will power on automatically via the OBDII connection.

5. Bedryfsinstruksies

The TP150 offers various functions accessible from the main menu. Navigate using the directional buttons and confirm selections with the OK button.

5.1. Activating TPMS Sensors

1. Kies uit die hoofkieslys "TPMS" or "Activate".
2. Kies die voertuigmerk, model en jaar.
3. Kies "Activate Sensor".
4. Hold the TP150 tool near each tire's valve stem and press the activation button.
5. The tool will display sensor information (ID, pressure, temperature, voltage) upon successful activation.

5.2. TPMS Relearn Procedures

Relearning is required when new sensors are installed, tires are rotated, or the ECU is replaced.

1. Kies uit die hoofkieslys "TPMS", toe "Herleer".
2. Select the vehicle make, model, and year.
3. Choose the appropriate relearn method:
• OBD Herleer: Connect the TP150 to the vehicle's OBDII port. Follow on-screen instructions to transfer new sensor IDs to the vehicle's ECU.
• Static Relearn: Follow the specific vehicle manufacturer's procedure, often involving a sequence of actions (e.g., turning ignition on/off, pressing brake pedal). The TP150 will guide you through the process.
4. Confirm successful relearn on the device screen and check the vehicle's dashboard for the TPMS warning light status.

5.3. Programming XTOOL Sensors

The TP150 can program XTOOL 315/433MHz sensors only. This is useful for replacing faulty sensors.

1. Kies uit die hoofkieslys "TPMS", toe "Program Sensor".
2. Place the XTOOL sensor to be programmed near the TP150's antenna.
3. Kies een van die volgende programmeringsmetodes:
• Automatic ID Generation: The tool generates a new, unique sensor ID.
• Enter ID Manually: Input a specific sensor ID if known.
• Copy ID by Activating: Activate an existing sensor to copy its ID to the new XTOOL sensor.
• Read ECU Copy ID: Read sensor IDs directly from the vehicle's ECU via the OBDII port and copy them to new XTOOL sensors.
4. Follow the on-screen prompts to complete the programming.

5.4. Diagnosing TPMS System

1. Connect the TP150 to the vehicle's OBDII port.
2. Kies uit die hoofkieslys "TPMS", toe "Diagnoseer".
3. The tool will scan the TPMS system for Diagnostic Trouble Codes (DTCs).
4. Review the displayed DTCs to identify system faults.
5. After repairs, select "Clear DTCs" to erase the codes and reset the TPMS warning light.

6. Onderhoud

• Skoonmaak: Vee die toestel af met 'n sagte, damp lap. Moenie skuur skoonmaakmiddels of oplosmiddels gebruik nie.
• Berging: Store the TP150 in its protective case in a dry, cool environment when not in use.
• Sagteware-opdaterings: Regularly check for and install software updates to ensure optimal performance and compatibility with new vehicle models and sensors.
• Batterysorg: If the device has an internal battery, avoid fully discharging it for extended periods. Charge it periodically if stored for a long time.

7. Probleemoplossing

8. Spesifikasies

9. Waarborg en Ondersteuning

9.1. Waarborginligting

XTOOL products typically come with a limited warranty covering defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official XTOOL website for detailed warranty terms and conditions, including duration and coverage specifics.

9.2. Tegniese Ondersteuning

For technical assistance, software updates, or any inquiries regarding your XTOOL TP150, please contact XTOOL customer support through their official channels:

• Amptelik Webwebwerf: www.xtooltech.com (Check for support contact details, FAQs, and software downloads)
• E-pos ondersteuning: Verwys na die kontakafdeling op die amptelike webwebwerf.
• Aanlyn hulpbronne: Many helpful guides and videos may be available on the XTOOL website or their official social media channels.

When contacting support, please have your product model (XT-TP150) and serial number ready.