aigo AZ300 Mid Tower Computer Case User Manual

1. Inleiding

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. Veiligheidsinligting

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Handle tempered glass panels with care. They are fragile and can break if dropped or subjected to impact.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• Hou klein onderdele en skroewe weg van kinders.
• Verseker behoorlike aarding om elektriese gevare te voorkom.

3. Produk verbyview

3.1 Voorste I/O-paneel

Die voorste I/O-paneel bied gerieflike toegang tot noodsaaklike poorte en kontroles.

Figure 2: Front I/O Panel Layout

• Tipe C-poort: 1x USB Type-C port for modern connectivity.
• USB 2.0-poort: 1x USB 2.0 port for peripheral connections.
• USB 3.0-poort: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Reset/LED Button: Resets the system or controls LED lighting (if applicable).
• Kragknoppie: Skakel die rekenaar aan of af.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• Moederbordversoenbaarheid: Supports ATX, Micro-ATX, and ITX motherboards.
• Storage Drive Bays: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• GPU lengte: Maximum GPU length of 400mm.
• PSU lengte: Supports standard ATX power supplies up to 200mm.

4. Installasiehandleiding

4.1 Voorbereiding van die Saak

1. Plaas die kas op 'n plat, stabiele oppervlak.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Figure 4: Rear-Side View of Case

4.2 Moederbord installasie

1. Installeer die I/O-skerm (indien nie vooraf geïnstalleer nie) in die agterste opening van die kas.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Bevestig die moederbord met die meegeleverde skroewe.

Figure 5: Motherboard Mounting Areas

4.3 Installasie van kragtoevoereenheid (PSU).

1. Locate the PSU mounting area at the bottom rear of the case.
2. Slide your ATX power supply into the designated slot.
3. Secure the PSU to the case with screws from the rear.

4.4 Installasie van stoorskyf

1. 2.5" SSD's: Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. 3.5" HDD's: Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Bevestig alle aandrywers met die toepaslike skroewe.

Figure 6: Rear Internal View with Drive Bays

4.5 Expansion Card (GPU) Installation

1. Verwyder die nodige uitbreidingsgleufdeksels van die agterkant van die kas.
2. Insert your graphics card or other expansion cards into the appropriate PCIe slots on the motherboard.
3. Maak die kaarte met skroewe vas.

4.6 Installasie van die verkoelingstelsel

The aigo AZ300 supports flexible cooling configurations.

• Aanhangerondersteuning: Multiple 120mm fan mounting points are available at the top, front, and rear.
• Radiator ondersteuning: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7 Kabelbestuur

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables for improved airflow and aesthetics.

5. Operasie

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. Onderhoud

Regular maintenance helps ensure optimal performance and longevity of your computer components.

6.1 Skoonmaak van die stoffilter

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Top Magnetic Dust Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• PSU-stoffilter: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. Probleemoplossing

• System not powering on: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Geen vertoon nie: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• Oorverhitting: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• USB ports not working: Check that the USB headers from the front panel are correctly connected to the motherboard.

8. Spesifikasies

9. Waarborg en Ondersteuning

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo webwebwerf.