BEAUTURAL 2600W Steam Iron User Manual

1. Belangrike veiligheidsinstruksies

When using your steam iron, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. Read all instructions before using the iron.

• Gebruik die strykyster slegs vir sy beoogde gebruik.
• Om te beskerm teen die risiko van elektriese skok, moenie die strykyster in water of ander vloeistowwe dompel nie.
• Skakel altyd die strykyster AF voordat jy dit by die elektriese aansluiting in- of uitprop. Moet nooit aan die koord trek om dit van die aansluiting te ontkoppel nie; gryp eerder die prop vas en trek om dit te ontkoppel.
• Moenie toelaat dat die koord aan warm oppervlaktes raak nie. Laat die strykyster heeltemal afkoel voordat dit weggepak word. Draai die koord losweg om die strykyster wanneer dit gebêre word.
• Ontkoppel altyd die strykyster van die elektriese aansluiting wanneer dit met water gevul word of leeggemaak word, en wanneer dit nie gebruik word nie.
• Do not operate the iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron. Contact qualified service personnel for examination and repair. Incorrect reassembly can cause a risk of electric shock when the iron is used.
• Noukeurige toesig is nodig vir enige toestel wat deur of naby kinders gebruik word. Moenie die strykyster sonder toesig laat terwyl dit gekoppel is of op 'n strykplank nie.
• Brandwonde kan voorkom deur warm metaaldele, warm water of stoom aan te raak. Wees versigtig wanneer u 'n stoomyster onderstebo draai - daar kan warm water in die reservoir wees.
• Die yster moet gebruik word en op 'n stabiele oppervlak rus.

2. Produk verbyview

The BEAUTURAL 2600W Steam Iron is designed for efficient and effective garment care. It features a durable ceramic soleplate for smooth gliding and even heat distribution.

Image: The ceramic soleplate of the BEAUTURAL iron, designed for durability and smooth gliding.

3. Opstelling

3.1 Uitpak

• Verwyder die strykyster versigtig uit sy verpakking.
• Verwyder enige etikette of beskermende film van die soolplaat.
• Bewaar die verpakking vir toekomstige berging of vervoer.

3.2 Voorbereiding vir eerste gebruik

• Before first use, fill the water tank and heat the iron to its maximum temperature. Allow it to steam for a few minutes to clean any manufacturing residues from the steam vents.
• It is normal for a small amount of water to be present in the tank due to factory testing.

Image: The BEAUTURAL steam iron, ready for setup and use.

4. Bedryfsinstruksies

4.1 Vul die watertenk

1. Maak seker dat die strykyster van die kragtoevoer afgekoppel is.
2. Stel die stoombeheer op die 'Droë Stryk'-posisie (geen stoom nie).
3. Maak die waterinlaatdeksel oop.
4. Gooi kraanwater versigtig met 'n maatbeker in die watertenk tot by die 'MAX'-vullyn. Moenie te vol maak nie.
5. Maak die waterinlaatdeksel stewig toe.

4.2 Temperature Control and Fabric Selection

1. Steek die strykyster in 'n geskikte elektriese aansluiting.
2. Turn the thermostat dial to the desired temperature setting based on the fabric type. Refer to the garment's care label.
3. Die aanwyserliggie sal brand, wat aandui dat die strykyster besig is om te verhit. Dit sal afskakel wanneer die gekose temperatuur bereik word.

4.3 Stoomfunksies

• Deurlopende stoom: For steam ironing, ensure the temperature dial is set to a steam-appropriate setting (usually between '••' and 'MAX'). Adjust the steam control slider to the desired steam output.
• Stoombars: Press the steam burst button for an extra powerful shot of steam to remove stubborn wrinkles. Wait a few seconds between bursts.
• Vertikale stoom: The iron can be used to steam hanging garments, drapes, or upholstery. Hold the iron vertically, press the steam burst button, and direct the steam towards the fabric.

Image: Demonstrating the vertical steam function for various fabrics.

4.4 Droë stryk

For dry ironing, ensure the water tank is empty or the steam control is set to the 'Dry Ironing' position. Select the desired temperature and iron as usual.

4.5 Anti-Drip Function

The anti-drip system prevents water from leaking from the soleplate when the iron's temperature is too low for steam production. If you notice dripping, increase the temperature setting.

4.6 3-Way Automatic Shut-Off

For safety, the iron is equipped with a 3-way automatic shut-off feature:

• If left vertikaal on its heel rest, the iron will automatically turn off after approximately 8 minutes.
• If left horisontaal on its soleplate, the iron will automatically turn off after approximately 30 seconds.
• If omgeslaan, the iron will automatically turn off after approximately 30 seconds.

To reactivate the iron, simply move it. The indicator light will illuminate as it reheats to the selected temperature.

Image: Visual explanation of the 3-way automatic shut-off safety feature.

5. Onderhoud en versorging

5.1 Selfreinigende funksie

The self-cleaning function helps remove mineral deposits from the steam chamber. Perform this function regularly, especially if you use hard water.

1. Fill the water tank to the 'MAX' line.
2. Set the steam control to 'Dry Ironing' and the temperature dial to 'MAX'.
3. Plug in the iron and wait for the indicator light to turn off, indicating it has reached maximum temperature.
4. Ontkoppel die yster.
5. Hold the iron horizontally over a sink. Press and hold the self-clean button. Hot water and steam will be expelled from the soleplate, flushing out impurities.
6. Wieg die strykyster saggies heen en weer totdat die watertenk leeg is.
7. Laat die selfskoonmaakknoppie los.
8. Reheat the iron to dry the soleplate, then unplug and store.

Image: The iron's water tank and self-clean mechanism, relevant for maintenance.

5.2 Anti-kalkstelsel

The built-in anti-calc system helps reduce the build-up of limescale in the iron, prolonging its lifespan. Regular self-cleaning is still recommended.

5.3 Leegmaak en berging

• After each use, unplug the iron and allow it to cool completely.
• Maak enige oorblywende water uit die tenk leeg.
• Store the iron upright on its heel rest in a safe, dry place.

5.4 Skoonmaak van die zoolplaat

Om die soolplaat skoon te maak, maak seker dat die strykyster koel en ontkoppel is. Vee die soolplaat af met 'n advertensie.amp cloth and a non-abrasive cleaner. Do not use metallic scouring pads or harsh chemicals.

6. Probleemoplossing

7. Spesifikasies

Image: Key specifications and dimensions of the BEAUTURAL steam iron.

8. Waarborg en Ondersteuning

For warranty information or technical support, please refer to the warranty card included with your product or contact BEAUTURAL customer service. Information regarding spare parts availability is currently unavailable.