BLS T36-3

BLS T36-3 36 LED Closet Light Instruction Manual

Model: T36-3 (5500K Daylight White, 3 Pack)

Inleiding

Thank you for choosing the BLS T36-3 36 LED Closet Light. This super bright, battery-powered under cabinet lighting solution is designed to enhance visibility and convenience in various indoor spaces. Featuring a motion sensor and a 1500mAh rechargeable battery, these wireless lights offer efficient and flexible illumination.

  • 36 superhelder LED's: Provides 180 Lumens of 5500K Daylight White light, ideal for closets, cabinets, kitchens, and more.
  • Ultra-Long Battery Run Time: Equipped with a 1500mAh rechargeable battery, offering up to 120 days of use (based on 10 uses/day, 20 seconds/use).
  • Reliable Motion Sensor with 2 Modes: Features ON/OFF/AUTO NIGHT/AUTO DAY & NIGHT modes. BLS Constant-Sense technology ensures the light stays on as long as motion is detected, turning off 15 seconds after inactivity.
  • Koordlose installasie: Built-in strong magnets allow for easy attachment to metal surfaces or use with provided 3M adhesive magnetic plates for non-metal surfaces.
  • Wye toepassing: Suitable for various indoor locations including wardrobes, attics, basements, drawers, garages, and vanity mirrors.

Opstel instruksies

  1. Laai die ligte: Before first use, fully charge each LED light using the provided USB charging cable. The charging port is located on the side of the light. A red indicator light typically signifies charging, turning green or off when fully charged.
  2. Berei montage-oppervlak voor: Ensure the desired installation surface is clean, dry, and smooth.
  3. Attach Magnetic Plates (for non-metal surfaces):
    • Peel off the protective film from one side of the 3M adhesive on the magnetic plate.
    • Firmly press the adhesive side of the magnetic plate onto the desired installation location.
    • Repeat for all lights.
  4. Monteer die ligte:
    • If installing on a metal surface, simply attach the light directly as it has a built-in strong magnet.
    • If using magnetic plates, align the magnets on the back of the LED light with the installed magnetic plates and gently attach. The lights are easily detachable for recharging.
BLS LED Closet Light installation showing magnetic plates
Image: Illustration of the magnetic installation process for the BLS LED Closet Light, showing how to attach the light to a surface using adhesive magnetic plates.
Diagram showing magnetic installation on ironwork and non-ironwork surfaces
Image: Detailed diagram illustrating two installation methods: direct magnetic attachment to iron surfaces and using 3M adhesive magnetic plates for non-iron surfaces.

Bedryfsinstruksies

The BLS T36-3 LED Closet Light features a slide switch with multiple operating modes:

  • AF: Power off the light.
  • OUTOMATIESE NAG (Maan-ikoon): Motion sensor mode. The light will only turn on when it detects motion in dark or very dim conditions. Ideal for bedrooms, hallways, or basements at night.
  • AUTO DAY & NIGHT (Sun Icon): Motion sensor mode. The light will turn on when it detects motion, regardless of ambient light conditions (day or night). Suitable for closets, cabinets, or under-cabinet lighting where light is needed at all times.
  • OP: The light remains continuously on, regardless of motion or ambient light.

The BLS Constant-Sense technology ensures the light stays illuminated as long as motion is detected nearby, automatically turning off approximately 15 seconds after motion ceases.

BLS LED Closet Light with slide switch showing OFF, AUTO NIGHT, AUTO DAY & NIGHT, and ON modes
Image: Close-up of the BLS LED Closet Light's slide switch, detailing the four operating modes: OFF, AUTO NIGHT (moon icon), AUTO DAY & NIGHT (sun icon), and ON.

Onderhoud

  • Laai: When the light dims or stops responding, it indicates a low battery. Detach the light from its mounting, connect the provided USB cable to the charging port, and plug it into a USB power source. A red indicator light typically signifies charging, turning green or off when fully charged.
  • Skoonmaak: Wipe the light's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the finish or electronic components.
  • Berging: If storing the lights for an extended period, ensure they are fully charged and stored in a cool, dry place. Recharge periodically to maintain battery health.

Charging Demonstration Video

Video: A demonstration on how to charge the BLS LED Closet Light using the provided USB cable. This video shows the charging port and indicator light behavior.

Battery Life Information Video

Video: This video highlights the 1500mAh rechargeable battery and its extended run time of up to 120 days, demonstrating the product's efficiency.

Probleemoplossing

ProbleemMoontlike oorsaakOplossing
Lig skakel nie aan nie.Lae battery.
Incorrect mode setting.
Insufficient darkness (in AUTO NIGHT mode).
Charge the light fully.
Check the slide switch and ensure it's set to ON, AUTO NIGHT, or AUTO DAY & NIGHT.
Test in a darker environment or switch to AUTO DAY & NIGHT mode.
Bewegingsensor werk nie.Incorrect mode setting.
Sensor geblokkeer.
Ambient light too bright (in AUTO NIGHT mode).
Ensure the switch is set to AUTO NIGHT or AUTO DAY & NIGHT.
Verwyder enige obstruksies van die sensor.
Test in a darker area or switch to AUTO DAY & NIGHT.
Lig val van die monteringsoppervlak af.Adhesive not strong enough or surface not clean.
Magnetic plates not properly secured.
Clean the surface thoroughly before applying adhesive. Use new 3M adhesive strips if necessary. Consider using screws for more permanent installation if the surface allows.
Kort batterylewe.Gereelde aktivering.
Continuous ON mode usage.
Batteryverswakking oor tyd.
Optimize mode setting (e.g., use AUTO NIGHT in dark areas).
Avoid prolonged use in ON mode.
Ensure full charge cycles. If battery life remains significantly short, contact support.

Spesifikasies

KenmerkDetail
HandelsmerkBLS
Model Naam36 LED Closet Lights (T36-3)
Kleur temperatuur5500K Daglig Wit
Aantal LED's36
Helderheid180 Lumen
Kragbron1500mAh Rechargeable Lithium Ion Battery (included)
Wattage3 watt
MateriaalAkrielnitril Butadieen Styreen, Aluminium
Produk afmetings1.4 cm L x 8.9 cm B x 0.6 cm H
Item gewig0.42 kilogram (14.8 onse)
Installasie tipeWall Mount / Under Cabinet (Magnetic with 3M adhesive)
Spesiale kenmerk3-way switching, Motion Sensor, Instant On
Beheer metodeSkyfie skakelaar
Binne/buiteluggebruikBinneshuise
WaterweerstandvlakWaterproof (Note: Typically means splash-proof, not submersible)

Waarborg inligting

BLS offers an 18-month warranty for this product. To register for your free extended warranty, please scan the QR code provided on the product packaging or contact customer support.

Kliënte ondersteuning

For any support needs, questions, or concerns regarding your BLS T36-3 LED Closet Light, please contact us via email:

cuscare.blscollection@gmail.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.