Universal Audio UAFX Golden Reverb Pedal Instruction Manual

1. Inleiding

The Universal Audio UAFX Golden Reverb Pedal delivers classic reverb effects, including Spring, Plate, and Vintage Digital. This pedal offers Live/Preset footswitch modes and selectable true or buffered/trails bypass via the UAFX Control app. This manual provides detailed instructions for setting up, operating, and maintaining your UAFX Golden Reverb Pedal.

2. Wat is in die boks

• UAFX Golden Reverberator Pedal
• UAFX Control app (download required)

3. Produk verbyview

3.1. Kontroles en aanwysers

The UAFX Golden Reverb Pedal features intuitive controls for shaping your reverb sound. Familiarize yourself with the layout below.

Prent 1: Top view of the UAFX Golden Reverb Pedal, highlighting the Decay, Predelay, Mix, Bass, Treble, and Mod knobs, along with the Effect Type, Store, and A/B/C switches, and the ON and PRESET footswitches.

• VERVAL Knop: Pas die lengte van die galmstert aan.
• PREDELAY Knob: Beheer die tyd voordat die nagalm-effek begin.
• MIX Knop: Sets the balance between the dry (unaffected) and wet (effected) signal.
• BAS Knop: Pas die laefrekwensie-inhoud van die galm aan.
• TREBLE Knop: Pas die hoëfrekwensie-inhoud van die galm aan.
• MOD Knop: Controls the amount of modulation applied to the reverb tail.
• EFFECT TYPE Switch: Selects between Spring '65, Plate 140, and Hall 224 reverb algorithms.
• STORE Switch: Used to save custom settings as presets.
• A/B/C-skakelaar: Selects different variations or modes within each effect type.
• ON Footswitch: Skakel die effek aan of af.
• VOORINSTELDE voetskakelaar: Recalls saved presets.

3.2. Verbindings

The rear panel provides all necessary audio and power connections.

Prent 2: Rear panel connections of the UAFX Golden Reverb Pedal, including 1/MONO and 2/STEREO input/output jacks, 9VDC power input, USB-C port, and PAIR button.

• 1/MONO IN: Main audio input. Use for mono signal.
• 2/STEREO IN: Second audio input for stereo operation.
• 1/MONO OUT: Main audio output. Use for mono signal.
• 2/STEREO OUT: Second audio output for stereo operation.
• 9VDC: Power input for connecting a 9V DC power supply (400mA minimum, center-negative).
• USB-C: For firmware updates and connection to the UAFX Control app.
• PAAR-knoppie: Used for Bluetooth pairing with the UAFX Control app.

4. Opstelling

1. Kragverbinding: Connect a 9V DC power supply (center-negative, 400mA minimum) to the 9VDC input.
2. Oudioverbindings:
   • Vir Mono operation, connect your instrument to the 1/MONO IN domkrag en jou amplifier/interface to the 1/MONO OUT domkrag.
   • Vir Stereo operation, connect your instrument/stereo source to both 1/MONO IN en 2/STEREO IN jacks, and your stereo amplifier/interface to both 1/MONO OUT en 2/STEREO OUT domkragte.
3. Aanvanklike krag aan: The pedal will power on automatically when connected to power. The ON LED will illuminate.
4. UAFX Control App: Download the UAFX Control app from your device's app store. Use the USB-C port for initial registration and firmware updates. Use the PAIR button for Bluetooth connection to manage settings and access additional features.

Prent 3: The UAFX Golden Reverb Pedal integrated into a guitar pedalboard setup, demonstrating typical connections to other effects and an amplewendiger.

5. Bedryfsinstruksies

5.1. Selecting Reverb Modes

Gebruik die EFFEKTIPE toggle switch to select one of the three primary reverb algorithms:

• Spring '65: Emulates the classic spring reverb tanks found in vintage 1960s American guitar amplewendes.
• Plate 140: Recreates the dense, smooth sound of German studio plate reverbs from the 1950s.
• Hall 224: Provides the rich, expansive sound of vintage digital hall reverbs from the late 1970s.

Further variations within each effect type can be accessed using the A / B / C toggle switch. For example, the Spring '65 mode offers different spring tank configurations, while Plate 140 and Hall 224 offer distinct plate and hall characteristics respectively. Additional vintage digital Chamber & Plate effects can be downloaded upon product registration via the UAFX Control app.

5.2. Adjusting Reverb Parameters

Pas die VERVAL, VOORVERTRAGING, en MENG knobs to fine-tune the reverb's characteristics. The BASS en TREBEL knobs allow for equalization of the reverb tail, while the MOD knob introduces subtle modulation for added texture.

Prent 4: Gedetailleerd view of the control knobs and switches on the UAFX Golden Reverb Pedal, showing settings for Decay, Predelay, Mix, Bass, Treble, and Mod.

5.3. Live/Preset Modes and Bypass

• Regstreekse modus: When the PRESET LED is off, the pedal operates in Live mode, reflecting the current physical knob settings.
• Vooraf ingestelde modus: To save a preset, adjust the controls to your desired sound, then press and hold the WINKEL switch until the PRESET LED flashes. To recall a preset, press the VOORINSTEL Voet skakelaar.
• Omseilmodusse: The pedal supports both true bypass and buffered bypass with trails. This setting can be configured via the UAFX Control app. True bypass completely removes the pedal from the signal path when off, while buffered bypass allows the reverb tail to naturally decay after the effect is disengaged.

6. Onderhoud

• Skoonmaak: Gebruik 'n sagte, droë lap om die buitekant van die pedaal skoon te maak. Vermy skuurmiddels of oplosmiddels.
• Firmware -opdaterings: Periodically check the Universal Audio website or the UAFX Control app for firmware updates to ensure optimal performance and access to new features. Updates are typically performed via the USB-C connection.
• Berging: Bêre die pedaal op 'n koel, droë plek weg van direkte sonlig en uiterste temperature wanneer dit nie gebruik word nie.

7. Probleemoplossing

• Geen klank:
  • Ensure the power supply is correctly connected and providing 9V DC (center-negative).
  • Kontroleer alle oudiokabels vir behoorlike verbinding en integriteit.
  • Verify the ON footswitch is engaged (ON LED illuminated).
• Onverwagte klank/geraas:
  • Check knob settings, especially MIX, DECAY, and MOD.
  • Ensure proper grounding of your audio equipment to avoid hum or buzz.
  • Test with different cables and power supplies to rule out faulty accessories.
• UAFX Control App Connectivity Issues:
  • Maak seker dat Bluetooth op jou mobiele toestel geaktiveer is.
  • Press the PAIR button on the pedal to initiate pairing mode.
  • For initial setup or persistent issues, connect the pedal via USB-C to a computer and use the desktop UAFX Control software.

8. Spesifikasies

9. Waarborg en Ondersteuning

For warranty information, technical support, and additional resources, please visit the official Universal Audio website or contact their customer service. Ensure your product is registered to receive updates and support.

The UAFX Control app provides a convenient way to manage your pedal's settings, update firmware, and access exclusive features. It is available for both iOS and Android devices.

Aanlyn hulpbronne: Universal Audio Official Webwebwerf