1. Inleiding
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Pknight 8-Way Isolated DMX Splitter with 2.4G Wireless Receiver Function. This device is designed to distribute DMX512 signals reliably and efficiently, offering both wired and wireless signal reception capabilities. Please read this manual thoroughly before use to ensure proper functionality and to prevent damage.
Beeld 1.1: Voorkant view of the Pknight 8-Way Isolated DMX Splitter, showing its compact design and various DMX output ports.
2. Kenmerke
- 2.4G Wireless Receiver Function: Capable of receiving DMX signals from compatible wireless transmitters. This signal is then amplified and distributed alongside any wired input to the 8 DMX output ports.
- Veelvuldige koppelvlakke: Equipped with 8 DMX output (female XLR), 1 DMX Input (male XLR), and 1 DMX Thru (female XLR) ports to accommodate various connection requirements.
- Optical Isolation: All input and output ports are electrically and optically isolated from each other, providing protection against electrical interference and potential damage to connected equipment.
- Kragtoevoer: Operates on a 9V DC power supply (adapter included).
- Kompakte ontwerp: Lightweight and easy to mount, suitable for both permanent installations and mobile entertainment systems.
Beeld 2.1: Bo-na-onder view of the DMX Splitter highlighting its 8 DMX outputs, 1 DMX input, 1 DMX Thru, and overall dimensions (5 inches wide, 5.6 inches deep, 1.7 inches high).
Beeld 2.2: Nabyskoot view showing the detachable antenna and indicating 2.4G wireless functionality with 7 channels for receiving DMX from a transmitter.
3. Pakketinhoud
Verifieer dat alle items teenwoordig en in 'n goeie toestand is wanneer u die pakkie oopmaak:
- Pknight 8-Way Isolated DMX Splitter with 2.4G Wireless Receiver Function
- 9V DC Kragadapter
- Detachable 2.4G Antenna
- Gebruikershandleiding (hierdie dokument)
4. Opstelling
4.1 Fisiese Plasing
Place the DMX splitter on a stable, flat surface or mount it securely using appropriate hardware. Ensure adequate ventilation around the unit.
4.2 Aansluiting van die krag
- Connect the provided 9V DC power adapter to the power input port on the splitter.
- Plug the power adapter into a suitable electrical outlet. The power indicator LED on the unit should illuminate.
4.3 DMX-verbindings
The splitter features 3-pin XLR connectors for DMX input and output.
- DMX-invoer: Connect your DMX controller's output to the DMX IN (male XLR) port on the splitter.
- DMX Thru: If you need to daisy-chain the DMX signal to another device before splitting, connect it to the DMX DEUR (female XLR) port. This port provides an unprocessed copy of the input signal.
- DMX Outputs: Connect your DMX-controlled lighting fixtures or other DMX devices to the DMX OUT 1-8 (female XLR) ports. Each output is isolated.
4.4 Wireless Antenna Installation
Screw the detachable 2.4G antenna onto the designated antenna connector on the splitter. Ensure it is securely fastened for optimal wireless signal reception.
Image 4.1: The DMX Splitter shown in a stage environment, illustrating its 3-pin XLR connectors, channel button, and LED indicators for signal and power status.
5. Bedryfsinstruksies
5.1 Aan-/afskakel
Use the power switch located on the unit to turn the device on or off. The power LED will indicate the unit's status.
5.2 Wired DMX Operation
- Ensure your DMX controller is sending a signal to the DMX IN hawe.
- The signal indicator LEDs on the splitter will illuminate, showing DMX signal presence.
- The DMX signal will be distributed to all 8 DMX UIT hawens.
5.3 Draadlose DMX-werking
The splitter can receive DMX signals wirelessly from a compatible 2.4G DMX transmitter (sold separately).
- Ensure the detachable antenna is securely connected.
- Power on the DMX splitter.
- Power on your 2.4G DMX transmitter and set it to the desired channel.
- The splitter will automatically detect and pair with the transmitter on the same channel. The signal indicator LEDs will show wireless DMX signal reception.
- The received wireless DMX signal will be amplified and distributed to all 8 DMX UIT hawens.
Let wel: When both wired and wireless DMX signals are present, the splitter will process both, amplifying and distributing them to the outputs. If you experience signal conflicts, ensure only one DMX source (wired or wireless) is actively transmitting to the splitter at a time, or manage your DMX universe assignments appropriately.
6. Onderhoud
- Skoonmaak: Gebruik 'n sagte, droë lap om die buitekant van die eenheid skoon te maak. Moenie skuurmiddels of oplosmiddels gebruik nie.
- Ventilasie: Maak seker dat die ventilasie-openinge nie geblokkeer is nie om oorverhitting te voorkom.
- Berging: Wanneer dit nie vir lang tye gebruik word nie, bêre die eenheid op 'n koel, droë plek, weg van direkte sonlig en uiterste temperature.
- Kabel inspeksie: Regularly inspect DMX cables and the power adapter for any signs of wear or damage. Replace damaged cables immediately.
7. Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Geen kragaanwyserlig nie | Kragadapter nie gekoppel of foutief nie; kragaansluiting nie aktief nie. | Check power adapter connection. Test power outlet. Replace adapter if faulty. |
| No DMX signal output (wired) | Incorrect DMX input connection; faulty DMX cable; DMX controller not sending signal. | Verify DMX IN connection. Test DMX cable. Check DMX controller status. |
| No DMX signal output (wireless) | Antenna not connected; transmitter off or out of range; channel mismatch. | Ensure antenna is connected. Check wireless DMX transmitter power and range. Verify transmitter and receiver are on the same channel. |
| Intermittent signal or flickering lights | Poor cable connection; DMX termination issues; signal interference. | Check all DMX cable connections. Ensure proper DMX termination on the last fixture. Minimize sources of electrical interference. |
8. Spesifikasies
- Model: TS-WDMX03C
- DMX-kanale: 512
- DMX-invoer: 1 x Male 3-pin XLR
- DMX Thru: 1 x Female 3-pin XLR
- DMX Outputs: 8 x Female 3-pin XLR (Optically Isolated)
- Draadlose frekwensie: 2.4G ISM (7 channels)
- Kragtoevoer: DC 9V (Adapter included)
- Materiaal: Metaal casing
- Afmetings (L x B x H): 7.6 x 6.2 x 2.2 duim (19.3 x 15.7 x 5.6 cm)
- Gewig: 1.68 pond (0.76 kg)
Image 8.1: The DMX Splitter displayed alongside various DMX 512 compatible lighting fixtures, illustrating its application in a lighting setup.
9. Waarborg en Ondersteuning
Pknight products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Pknight webwebwerf. Bewaar asseblief u bewys van aankoop vir waarborgeise.