Innovations 288-1W-BAB-M4-AB Wall Sconce User Manual

1. Inleiding

This manual provides instructions for the safe installation, operation, and maintenance of your Innovations 288-1W-BAB-M4-AB One Light Wall Sconce from the Nouveau 2 Collection. Please read these instructions thoroughly before beginning installation and retain them for future reference.

Figure 1: Innovations 288-1W-BAB-M4-AB Wall Sconce, featuring a black antique brass finish and a clear glass shade with an exposed filament bulb.

2. Veiligheidsinligting

WARNING: RISK OF ELECTRIC SHOCK. Turn off power at the circuit breaker or fuse box before installation or servicing.

• Alle elektriese verbindings moet in ooreenstemming wees met plaaslike kodes, verordeninge of die Nasionale Elektriese Kode (NEC).
• Raadpleeg 'n gekwalifiseerde elektrisiën as jy onseker is oor die installasieproses.
• This fixture is rated for Damp locations. Do not install in areas where it will be directly exposed to water.
• Maak seker dat alle bedradingsverbindings veilig en behoorlik geïsoleer is.
• Moenie die maksimum wat oorskry nietage gespesifiseer vir die gloeilamp.

3. Pakketinhoud

Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:

• Wall Sconce Fixture (1 unit)
• Monteringshardeware (dwarsbalk, skroewe, draadmoere)
• Instruksie Handleiding

Note: Light bulb is typically sold separately unless specified.

4. Opstelling en installering

Benodigde gereedskap (nie ingesluit nie): Skroewedraaier, draadstripper, elektriese band, veiligheidsbril.

1. Skakel krag af: Vind die stroombreker of sekeringskas en skakel die krag na die aansluitkas af waar die toebehore geïnstalleer sal word.
2. Berei drade voor: Carefully remove the existing fixture (if any). Strip 3/4 inch of insulation from the ends of the house supply wires.
3. Heg monteerplaat aan: Secure the mounting plate (crossbar) to the junction box using the provided screws. Ensure it is firmly attached.
4. Maak elektriese verbindings:
   • Connect the bare copper ground wire from the fixture to the house ground wire (usually bare copper or green) using a wire nut.
   • Connect the ribbed or marked fixture wire (neutral) to the house white wire (neutral) using a wire nut.
   • Connect the smooth or unmarked fixture wire (hot) to the house black wire (hot) using a wire nut.
   • Steek alle drade versigtig in die aansluitkas.
5. Monteer bevestiging: Align the fixture with the mounting plate and secure it using the provided screws or decorative nuts.
6. Installeer gloeilamp: Screw in an ST64 type light bulb (max 1 Watt, or as specified on the fixture) into the socket.
7. Herstel krag: Skakel die krag weer aan by die stroombreker of sekeringboks.

5. Bedryfsinstruksies

Once installed and power is restored, the Innovations 288-1W-BAB-M4-AB Wall Sconce operates via a standard wall switch connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.

6. Onderhoud

Skoonmaak:

• Ensure power is turned off before cleaning.
• Vee die toebehore af met 'n sagte, droë lap.
• Moenie skuurmiddels, oplosmiddels of politoermiddels gebruik nie, aangesien dit die afwerking kan beskadig.

Gloeilamp vervanging:

• Skakel die krag na die toebehore by die stroombreker af.
• Laat die gloeilamp heeltemal afkoel voordat jy dit aanraak.
• Unscrew the old bulb and replace it with a new ST64 type bulb, not exceeding 1 Watt.
• Herstel krag.

7. Probleemoplossing

8. Spesifikasies

9. Waarborg en Ondersteuning

This Innovations fixture comes with a 2-year finish warranty en a lifetime electrical warrantyHierdie waarborg dek defekte in materiale en vakmanskap onder normale gebruik en diens.

For technical support, replacement parts, or warranty claims, please contact Innovations customer service. Refer to your purchase documentation for specific contact details or visit the official Innovations webwebwerf.

Please have your model number (288-1W-BAB-M4-AB) and date of purchase available when contacting support.