Milesight MS-C2972-FIPB 2MP Pro Dome IP Network Camera User Manual

Produk verbyview

The Milesight MS-C2972-FIPB is a 2MP Pro Dome IP Day/Night Network Camera designed for robust surveillance applications. It features remote focus and zoom capabilities, an IK10 vandal-proof and IP66 weather-resistant casing, and advanced imaging technologies like 140 dB WDR (Wide Dynamic Range) and Smart IR II for superior image quality in varying light conditions.

This camera supports H.265 video compression for efficient storage and bandwidth usage, and includes a 256GB MicroSD card slot for on-board storage. It is fully ONVIF compliant, ensuring broad compatibility with various network video recorders (NVRs) and video management systems (VMS).

Sleutel kenmerke

• Motorized Zoom and Focus: Allows for remote adjustment of the camera's field of view en skerpte.
• IK10 Vandal-proof & IP66 Weather-resistant: Ensures durability and protection against impact and harsh environmental conditions, suitable for outdoor use.
• 140 dB WDR: Provides clear images in scenes with strong contrast, such as bright backlighting.
• Smart IR II: Advanced infrared technology for uniform illumination in low-light conditions, preventing overexposure of close objects.
• H.265+ Kompressie: Reduces bandwidth and storage requirements significantly compared to older compression standards.
• 256GB MicroSD Support: Enables on-board storage for local recording and redundancy.
• Full ONVIF Compliance: Ensures interoperability with a wide range of surveillance equipment.
• SIP/VoIP Support: Integrates voice and video over IP for enhanced communication capabilities.

Opstelling en installasie

Pakketinhoud

Voordat u met die installasie begin, maak seker dat alle komponente teenwoordig is:

• Milesight MS-C2972-FIPB IP Camera
• Montagesjabloon
• Monteringskroewe en muurproppe
• Waterdigte konnektor vir Ethernet-kabel
• Vinnige Begingids

Monteer die kamera

The MS-C2972-FIPB is designed for ceiling mount installation. Follow these steps:

1. Berei die monteeroppervlak voor: Choose a suitable location on a ceiling or wall that can support the camera's weight and provides the desired field of view.
2. Detach the Mounting Plate: Rotate the camera body counter-clockwise to detach it from the mounting plate. This plate will be secured to the surface first.



3. Merk boorgate: Use the provided mounting template to mark the positions for drilling holes on the mounting surface.
4. Boorgate: Drill holes according to the marked positions. Insert wall plugs if mounting on a masonry surface.
5. Veilige montageplaat: Attach the mounting plate to the surface using the provided screws.
6. Koppel kabels: Route the Ethernet cable through the mounting plate and connect it to the camera's RJ45 port. Ensure a waterproof connection using the supplied connector for outdoor installations. If not using PoE, connect the DC12V power supply.
7. Heg kameraliggaam aan: Align the camera body with the mounting plate and rotate clockwise until it locks securely into place.

Network Connection and Initial Setup

The camera supports Power over Ethernet (PoE) for simplified installation, requiring only one Ethernet cable for both power and data. Alternatively, it can be powered by a 12V DC adapter.

1. Koppel aan netwerk: Connect the camera to your network switch or router using an Ethernet cable. If using PoE, ensure your switch supports PoE (802.3af).
2. Ontdek Kamera: Use the Milesight Smart Tools software (available on the Milesight webwebwerf) om die kamera op jou netwerk te ontdek.
3. Ken IP-adres toe: Assign a static IP address or configure DHCP for the camera.
4. Toegang Web Interface: Maak oop a web blaaier en voer die kamera se IP-adres in om toegang daartoe te verkry web koppelvlak.
5. Aanvanklike aanmelding: Log in using the default username and password (refer to the Quick Start Guide for default credentials). It is highly recommended to change the default password immediately for security.
6. Firmware-opdatering: Check for and install any available firmware updates to ensure optimal performance and security.

Bedien die kamera

Remote Focus and Zoom

The MS-C2972-FIPB features a motorized varifocal lens, allowing you to adjust the zoom and focus remotely from the camera's web interface or compatible NVR/VMS software. This eliminates the need for manual adjustment at the camera's physical location.

Video konfigurasie

Access the "Video" settings in the web koppelvlak om te konfigureer:

• Resolusie: Up to 1920x1080 (2MP).
• Raamtempo: Adjust for desired smoothness of video.
• Kompressie: Select H.265+, H.265, H.264+, H.264, or MJPEG. H.265+ is recommended for efficiency.
• Bitsnelheid: Configure constant (CBR) or variable (VBR) bit rates.
• Prentinstellings: Adjust brightness, contrast, saturation, sharpness, WDR, and noise reduction.
• Privaatheidsmaskering: Define up to 8 areas to be masked for privacy concerns.

Oudiokonfigurasie

The camera includes a built-in microphone and supports two-way audio via an audio output interface. Configure audio settings under the "Audio" section:

• Oudiokompressie: G.711, AAC, G.722, G.726.
• Mikrofoonwins: Adjust sensitivity of the built-in microphone.
• Tweerigting oudio: Enable and configure for interactive communication.

Storage and Recording

The camera supports local storage on a MicroSD card up to 256GB. Configure recording schedules, motion detection recording, and continuous recording options in the "Storage" settings.

SIP/VoIP Integration

The MS-C2972-FIPB supports SIP/VoIP for voice and video-over-IP functionality. This allows for integration with VoIP systems for advanced communication and monitoring. Refer to the "System" or "Network" settings for SIP/VoIP configuration.

Onderhoud

Skoonmaak

• Lens and Dome Cover: Regularly clean the camera lens and the transparent dome cover with a soft, clean cloth. For stubborn dirt, use a mild, non-abrasive cleaning solution specifically designed for optical surfaces. Avoid harsh chemicals that could damage the coating.
• Kameraliggaam: Vee die kameraliggaam met advertensiemateriaal afamp lap om stof en vuil te verwyder.

Firmware-opdaterings

Periodically check the Milesight official website for new firmware versions. Keeping the firmware updated ensures optimal performance, introduces new features, and addresses potential security vulnerabilities.

• Laai die nuutste firmware af file from the Milesight support page.
• Kry toegang tot die kamera se web interface and navigate to the "System" or "Maintenance" section.
• Follow the on-screen instructions to upload and install the firmware. Do not power off the camera during the update process.

Omgewingsoorwegings

Although the camera is IP66 rated for weather resistance, extreme conditions can still affect performance. Ensure proper drainage around the camera if installed in areas prone to heavy rain or snow accumulation. Avoid direct exposure to prolonged strong sunlight if possible, as this can affect image quality and component lifespan.

Probleemoplossing

Spesifikasies

Waarborg en Ondersteuning

Specific warranty details for the Milesight MS-C2972-FIPB camera are typically provided at the point of purchase or can be found on the official Milesight webwebwerf. Bewaar asseblief u bewys van aankoop vir waarborgeise.

For technical support, product inquiries, or service requests, please visit the official Milesight support portal or contact their customer service. Contact information is usually available on the manufacturer's webwebwerf.

Note: This manual provides general guidance. For detailed technical specifications and advanced configurations, please refer to the complete product documentation available on the Milesight official webwebwerf.