Onforu 100W Dusk to Dawn Outdoor LED Flood Light Instruction Manual

1. Inleiding

This manual provides detailed instructions for the installation, operation, and maintenance of your Onforu 100W Dusk to Dawn Outdoor LED Flood Light. Please read this manual thoroughly before installation and use, and retain it for future reference. This flood light is designed for outdoor use, featuring a photocell sensor for automatic operation and adjustable heads for broad illumination.

Image 1.1: Onforu 100W Dusk to Dawn Outdoor LED Flood Light installed on a house, providing bright illumination.

2. Veiligheidsinligting

WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing.

• Maak seker dat die kragtoevoer afgeskakel is voor installasie of instandhouding.
• Installasie moet deur 'n gekwalifiseerde elektrisiën uitgevoer word in ooreenstemming met plaaslike elektriese kodes.
• Do not install on surfaces that are not structurally sound.
• Moenie direk in die LED-ligbron kyk wanneer dit brand nie.
• Hou vlambare materiale weg van die ligte.
• This product is not intended for use with motion sensors.
• This product is not solar powered.

3. Pakketinhoud

Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:

• 1 x Onforu 100W Dusk to Dawn Outdoor LED Flood Light
• 1 x Montagebeugel
• 1 x Rubber Pakking
• 1 x Black Cap for Photocell (for switch-controlled mode)
• Mounting Screws and Wire Nuts
• Instruksie Handleiding

Image 3.1: The flood light fixture and included installation hardware.

4. Produkkenmerke

• Hoë helderheid: 100W LED flood light producing up to 9000 lumens with 154 LEDs.
• Verstelbare koppe: Drie lamp heads can be adjusted independently to customize lighting angles and provide a wide light range (up to 120° beam angle).
• Skemer tot dagbreek sensor: Integrated photocell sensor automatically turns the light on at night (10-20 Lux) and off during the day (30-60 Lux).
• Switch-Controlled Mode: Option to cover the photocell sensor with the included black cap to enable manual control via a wall switch.
• IP65 Waterdig: Ensures reliable operation in various weather conditions, including rain, sleet, and snow.
• Doeltreffende verkoeling: Constructed with high-quality aluminum housing and a fin-type heat sink design for effective heat dissipation, prolonging LED lifespan.
• Energiebesparing: Advanced high-efficiency LEDs reduce electricity consumption by over 80%.

Image 4.1: The three adjustable lamp heads and the light perception sensor.

Image 4.2: The light demonstrating its IP65 waterproof capability during rainfall.

5. Opstelling en installering

This product requires hardwired installation. Ensure power is disconnected before proceeding.

1. Berei bedrading voor: Ensure the electrical box is properly installed and the power is off at the circuit breaker.
2. Montagebeugel: Attach the mounting bracket to the electrical box using the provided screws. Ensure the rubber gasket is placed between the bracket and the mounting surface for a watertight seal.
3. Bedrading verbindings: Connect the light fixture's wires to your household wiring:
   • Black wire (Live) to the Live wire.
   • White wire (Neutral) to the Neutral wire.
   • Green wire (Ground) to the Ground wire.
   Secure connections with wire nuts.
4. Heg toebehore aan: Align the light fixture with the mounting bracket and secure it with the central screw. Ensure the fixture is flush against the mounting surface.
5. Pas koppe aan: Loosen the screws on the adjustable heads to position them to your desired lighting angles. Tighten the screws to secure the heads.
6. Herstel krag: Skakel die krag by die stroombreker aan.

Image 5.1: Wiring diagram for installation.

Image 5.2: Visual guide for the installation process.

6. Bedryfsinstruksies

The Onforu 100W Dusk to Dawn Outdoor LED Flood Light offers two operating modes:

6.1. Dusk to Dawn Mode (Default)

In this mode, the integrated photocell sensor detects ambient light levels. The light will automatically turn on when the ambient light drops to 10-20 Lux (at dusk) and turn off when the ambient light increases to 30-60 Lux (at dawn).

Image 6.1: The light operating in automatic dusk to dawn mode.

6.2. Switch-Controlled Mode

To operate the light manually via a wall switch, cover the photocell sensor with the provided black cap. This will prevent the sensor from detecting ambient light, allowing the light to be controlled solely by the external switch.

Image 6.2: Using the black cap to enable switch-controlled mode.

7. Onderhoud

• Skoonmaak: Periodically clean the light fixture and photocell sensor with a soft, damp cloth to ensure optimal performance. Do not use abrasive cleaners or solvents.
• Inspeksie: Regularly inspect the wiring and mounting for any signs of damage or loosening.
• LED vervanging: The LEDs are integrated and not user-replaceable.

8. Probleemoplossing

9. Spesifikasies

10. Waarborg en Ondersteuning

This product is sold with no stated warranty. For any questions or technical assistance, please refer to the retailer's customer service or the manufacturer's official webwebwerf vir ondersteuningsopsies.