Inleiding
The Concord Heritage LED Ceiling Fan is designed to provide efficient air circulation and ambient lighting for indoor spaces such as bedrooms, living rooms, and offices. This 52-inch fan features a traditional 5-blade design, an integrated LED light kit, and convenient pull chain control. Its dual-mount system allows for both flush and downrod installation, accommodating various ceiling heights.
Key features include reversible blades for year-round comfort, a powerful motor with three speed settings, and a durable steel housing with a white finish.
Veiligheidsinligting
Lees en verstaan asseblief alle instruksies voordat u met die installasie begin. Versuim om hierdie instruksies te volg, kan lei tot elektriese skok, brand of persoonlike besering.
- Ontkoppel altyd die krag by die hoofstroombreker voordat u die waaier installeer, skoonmaak of onderhou.
- All electrical connections must be in accordance with local codes, ordinances, and the National Electric Code. If you are unfamiliar with proper electrical wiring, seek the services of a qualified electrician.
- Ensure the installation site allows the fan blades to rotate without obstruction. Maintain a minimum clearance of 7 feet from the floor to the bottom of the blades.
- Die monteringsstruktuur moet die gewig van die waaier (ongeveer 17.6 pond) kan dra.
- Moenie die lemhouers buig tydens installasie of skoonmaak nie.
- Do not insert objects into the path of the fan blades while the fan is operating.
- This fan is rated for indoor, dry locations only. Do not install in damp of nat omgewings.
Pakketinhoud
Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:
- Fan Motor Housing Assembly
- 5 Fan Blades
- Blade Arms (pre-attached to blades or separate)
- Light Kit Assembly (Glass Shade, Light Fitter)
- 3 x 6.5W A15 LED Bulbs
- Montagebeugel
- 4.5-duim afwaartse stang
- Afdak
- Trekkettings (vir waaierspoed en lig)
- Hardewarepakket (skroewe, wassers, draadmoere, ens.)
Opstelling en installasie
This ceiling fan features a dual-mount system, allowing for either a flush mount installation (ideal for low ceilings) or a standard downrod installation. Professional installation is recommended if you are not experienced with electrical wiring.
Algemene installasie stappe:
- Skakel krag af: Before starting, ensure power is disconnected at the circuit breaker to prevent electrical shock.
- Montagebeugel installasie: Bevestig die monteerbeugel aan die plafon-aansluitingsboks. Maak seker dat die aansluitingsboks stewig aan die boustruktuur vasgemaak is en die waaier se gewig kan ondersteun.
- Vergadering: Assemble the fan blades to the motor housing. Attach the light kit assembly to the bottom of the fan motor. Install the included LED bulbs into the light kit.
- Bedrading: Connect the fan's electrical wires to the household wiring according to the wiring diagram provided in the full installation guide (not included here). Ensure all connections are secure using wire nuts.
- Fan Montage: Carefully lift the fan assembly and hang it from the mounting bracket. For downrod installation, feed the wires through the downrod and secure the downrod to the motor housing and mounting bracket. For flush mount, attach the fan directly to the mounting bracket.
- Afdak installasie: Slide the canopy up to the ceiling and secure it to the mounting bracket, covering the wiring connections.
- Finale tjeks: Double-check all connections and ensure no wires are pinched. Restore power at the circuit breaker.

Figuur 1: Algehele view of the Concord Heritage LED Ceiling Fan.

Figuur 2: Example of the fan installed using the flush mount option, suitable for lower ceilings.

Figuur 3: Example of the fan installed using the standard downrod option, providing more clearance.
Bedryfsinstruksies
The Concord Heritage LED Ceiling Fan is operated using two pull chains located on the fan's motor housing.
- Waaierspoedbeheer: One pull chain controls the fan speed. Pull the chain repeatedly to cycle through the three available speeds: High, Medium, Low, and Off.
- Ligbeheer: Die tweede trekketting beheer die geïntegreerde LED-ligstel. Trek die ketting om die lig aan of af te skakel.
- Omkeerbare lemme: The fan features reversible blades, allowing you to change the direction of airflow. During warmer months, set the fan to rotate counter-clockwise to create a cooling breeze. In cooler months, set the fan to rotate clockwise at a low speed to circulate warm air trapped near the ceiling. The direction switch is typically located on the fan motor housing.
Onderhoud
Gereelde onderhoud sal die lang lewensduur en optimale werkverrigting van jou plafonwaaier verseker.
- Skoonmaak: Om die waaier skoon te maak, vee die lemme en motorbehuising af met 'n sagte, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish. Ensure power is off before cleaning.
- Gloeilamp vervanging: The fan uses three 6.5W A15 LED bulbs with a medium base. To replace bulbs, ensure power is off, allow bulbs to cool, then carefully unscrew the old bulbs and screw in the new ones.
- Lembalans: If the fan wobbles, check that all blade screws are tightened. A balancing kit (not included) can be used to correct any imbalance.
- Draai bevestigingsmiddels vas: Periodically check and tighten all screws and fasteners on the fan assembly to ensure secure operation.
Probleemoplossing
If you experience issues with your fan, consult the following table for common problems and solutions:
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Waaier begin nie | Geen krag na die waaier nie Los draadverbindings Motor kwessie | Kontroleer die stroombreker en muurskakelaar. Verifieer dat alle draadverbindings stewig is (maak seker dat die krag eers afgeskakel is). Contact customer support if motor is unresponsive. |
| Fan wiebel | Los lemskroewe Ongebalanseerde lemme Los monteerbeugel | Draai alle lemskroewe vas. Use a blade balancing kit (sold separately) or swap blades to find balance. Maak seker dat die monteerbeugel stewig aan die plafon vasgemaak is. |
| Lig werk nie | Bulbs are faulty or loose Los draadverbindings Light kit issue | Check if bulbs are screwed in tightly; replace if necessary. Verify light kit wiring connections (ensure power is off first). Contact customer support if light kit is unresponsive. |
| Lawaaierige operasie | Los skroewe Motor hum Blade rubbing | Tighten all screws on the fan. Some motor hum is normal; if excessive, contact support. Check for any obstructions or misaligned blades. |
Spesifikasies
| Handelsmerk | Concord |
| Model Naam | Heritage |
| Deelnommer | 52HES5WH-MB-LED |
| Grootte | 52 duim |
| Kleur | Wit |
| Elektriese waaierontwerp | Plafonventilator |
| Kragbron | Elektries met koord |
| Produk afmetings | 52" D x 52" B x 18.13" H |
| Soort kamer | Slaapkamer, Woonkamer |
| Spesiale kenmerk | Dubbele berg |
| Aanbevole gebruike | Lug sirkulasie |
| Light Kit Wattage | 6.5 watt (per gloeilamp) |
| Aantal lemme | 5 |
| Lugvloeikapasiteit | 4500 kubieke voet per minuut |
| Voltage | 120 Volt |
| Skakel Tipe | Trek ketting |
| Item gewig | 17.6 pond |
| Binne/buiteluggebruik | Binneshuise |
| Sertifisering | UL gelys |
| Aantal kragvlakke | 3 |
| Tipe gloeilamp | LED (A15, Medium Base) |
| UPC | 098197967923 |
Waarborg & Ondersteuning
This Concord Heritage LED Ceiling Fan is backed by a Beperkte lewenslange motorwaarborg. This warranty covers defects in materials and workmanship of the fan motor under normal use and service.
For detailed warranty terms and conditions, please refer to the documentation included with your purchase or visit the manufacturer's official webwebwerf.
If you require technical assistance, have questions about installation, or need to claim warranty service, please contact Concord customer support. Contact information can typically be found on the product packaging or the manufacturer's webwebwerf.