FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk Instruction Manual

1. Inleiding

Thank you for choosing the FLEXISPOT EN2 55x28 Electric Height Adjustable Standing Desk. This manual provides essential information for the safe assembly, operation, and maintenance of your new desk. Please read all instructions carefully before use and retain this manual for future reference.

2. Veiligheidsinligting

• Maak seker dat alle onderdele teenwoordig en onbeskadig is voor montering.
• Assembly may require two people due to the weight of components.
• Hou kinders en troeteldiere weg van die lessenaar tydens werking.
• Do not overload the desk. The maximum weight recommendation is 154 pounds (70 kg).
• Ensure all electrical connections are secure and follow local electrical safety standards.
• Vermy die plasing van vloeistowwe direk op die beheerpaneel of naby elektriese komponente.
• Gebruik slegs die meegeleverde kragadapter.
• Do not disassemble or modify the desk's motor or control system.

3. Pakketinhoud

Your FLEXISPOT EN2 desk will arrive in two separate packages. Please verify all components against the packing list before beginning assembly.

• Desktop (55" x 28" White Top)
• Desk Frame (Gray Frame)
• Lifting Columns (Legs)
• Dwarsbalk
• Ondersteuningsplate
• Motor
• Control Panel (Keypad)
• Kragadapter en kabels
• Clamp Kragstrook met 3 WS-aansluitings en 2 USB-poorte
• Kabelbestuurbak
• Assembly Hardware (screws, hex keys, wrench)
• Instruksie Handleiding

4. Monteer-instruksies

Please follow these steps carefully. An electric drill (not included) may be required for some steps.

1. Berei die lessenaar voor: Lay the desktop upside down on a soft, clean surface to prevent scratches. The packaging includes foam pads that can be used for this purpose.
2. Installeer die motor: Attach the motor to the right lifting column. Ensure the motor's gear aligns with the column's mechanism and secure it with the provided screws and hex key. Tighten screws gradually and evenly.
3. Attach Lifting Columns to Crossbeam: Connect the lifting columns to the crossbeam. Ensure the orientation is correct as per the manual (e.g., motor side).
4. Install Support Plates: Secure the support plates to the lifting columns using the specified screws.
5. Install Desk Feet: Attach the desk feet to the bottom of the lifting columns. Ensure they are securely fastened.
6. Install Transmission Rod: Insert the transmission rod between the lifting columns, connecting it to the motor. Loosen the nut on the rod if necessary for insertion, then tighten it.
7. Mount the Control Panel (Keypad): Position the control panel on the underside of the desktop, typically on the front right edge for easy access. Secure it with the provided screws.
8. Mount the Cable Management Tray: Assemble the cable management tray by bending it along the perforated lines. Mount it to the underside of the desktop using the provided screws. Ensure the shorter lip faces the back to allow cables to drop in.
9. Koppel bedrading: Connect the motor cable, control panel cable, and power adapter to the main control box. Use the provided cable ties and adhesive clips to organize and secure all cables neatly under the desk and within the cable management tray.
10. Heg Clamp Kragstrook: Die klamp power strip can be attached to the back or side of your desk. Adjust the clamp to fit your desktop thickness and secure it in your desired location.
11. Finale kontrole: Ensure all screws are tightened and all cables are securely connected and managed. Carefully flip the desk upright.

5. Bedryfsinstruksies

Your FLEXISPOT EN2 desk features an intuitive 6-button digital controller for easy height adjustment and memory presets.

• Up/Down Buttons (Arrows): Press the up arrow to raise the desk and the down arrow to lower it. The current height will be displayed on the LED screen.
• Geheue-voorinstellings (1, 2, 3, 4): Your desk can store up to four preferred height settings. To set a memory position:
  1. Verstel die lessenaar tot die verlangde hoogte met die op/af pyle.
  2. Druk die 'M'-knoppie. Die LED-skerm sal 'S-' wys.
  3. Press the desired number button (1, 2, 3, or 4) within 3 seconds. The height is now saved.
• Anti-botsingsfunksie: The desk is equipped with an anti-collision system. If the desk encounters an obstacle during movement, it will stop and reverse slightly to prevent damage. You can adjust the sensitivity of this feature (refer to the full manual for detailed instructions on adjusting sensitivity levels).

6. Kenmerke

• Removable Desktop Power Outlet: Equipped with 3 power outlets and 2 USB charging ports, clip it to the back or side of your desk.
• Ample Whole-Piece Desktop: FSC-Certified wood desktop (55" x 28") provides generous space. Hand-measured: ±1" tolerance.
• 4 Memory Buttons: 6-button digital controller with 4 programmable memory presets.
• Motorized Height Adjustment: Smoothly adjusts from 28.1” to 45.7” with a quiet motor (less than 50 dB).
• Duursame konstruksie: Industrial-grade steel frame and solid tabletop support up to 176 pounds.
• Kabelbestuur: Integrated cable management device to keep your workspace tidy.

7. Spesifikasies

8. Onderhoud

• Skoonmaak: Vee die lessenaaroppervlaktes af met advertensiemateriaalamp lap. Vermy harde chemikalieë wat die afwerking kan beskadig.
• Gereelde tjeks: Kontroleer gereeld alle skroewe en boute om seker te maak dat hulle styf vas is. Draai weer vas indien nodig.
• Kabel inspeksie: Regularly inspect power cords and connections for any signs of wear or damage. Replace immediately if damage is found.

9. Probleemoplossing

If you encounter any issues with your desk, please refer to the following common solutions:

• Lessenaar beweeg nie: Check all cable connections, especially the power adapter and motor cable. Ensure the power outlet is functioning.
• Uneven Movement/Wobble: Ensure all assembly screws are tightened evenly. Check if the desk is placed on a level surface. Adjust the leveling feet if necessary.
• Beheerpaneel reageer nie: Try resetting the desk. (Refer to the full manual for specific reset procedures, often involves holding down specific buttons until 'RST' appears).
• Anti-Collision Triggering Frequently: The sensitivity of the anti-collision feature might be too high. Refer to the full manual for instructions on adjusting sensitivity levels.

10. Waarborg en Ondersteuning

Your FLEXISPOT EN2 desk comes with a comprehensive warranty:

• 5-jaar waarborg: Covers frames, motors, and other mechanical devices.
• 2-jaar waarborg: Covers controllers, switches, and electronics.

For warranty claims, technical support, or any questions not covered in this manual, please contact FLEXISPOT customer service through their official website or the retailer where you purchased the product. Please have your model number (EN2) and proof of purchase ready.