3Dconnexion CadMouse Pro 3DX-700080 User Manual

1. Inleiding

The 3Dconnexion CadMouse Pro 3DX-700080 is a purpose-built wired mouse designed for design and engineering professionals. It features advanced ergonomics and precise calibration to provide exceptional comfort and silent operation. This manual provides instructions for setting up, operating, maintaining, and troubleshooting your CadMouse Pro.

2. Pakketinhoud

Verifieer dat alle items in die pakket teenwoordig is:

• 3Dconnexion CadMouse Pro 3DX-700080
• Vinnige Begingids (indien ingesluit)
• Waarborginligting (indien ingesluit)

3. Opstelling

3.1 Connecting the CadMouse Pro

The CadMouse Pro is a wired USB device. To connect it to your computer:

1. Vind 'n beskikbare USB-poort op jou rekenaar.
2. Insert the USB connector of the CadMouse Pro into the USB port.
3. The operating system should automatically detect the device.

3.2 Bestuurderinstallasie

For full functionality and customization of your CadMouse Pro, it is recommended to install the latest 3Dconnexion drivers and software.

• Visit the official 3Dconnexion webwebwerf: www.3dconnexion.com/drivers
• Download and install the appropriate drivers for your operating system.
• Volg die instruksies op die skerm om die installasie te voltooi.

Figuur 1: Bo view of the CadMouse Pro, highlighting the primary buttons and scroll wheel.

4. Operating the CadMouse Pro

The CadMouse Pro is designed with specific features to enhance your CAD workflow.

4.1 Knoppie Funksies

• Linksklik-knoppie: Standaard primêre klikfunksie.
• Regskliekknoppie: Standaard sekondêre klikfunksie.
• Middle Mouse Button: Dedicated button for CAD applications, often used for pan, zoom, or orbit functions.
• Rolwiel: Used for scrolling documents and zooming in/out in CAD applications (Smart Mouse Wheel 2).
• QuickZoom Buttons: Two dedicated buttons located on the side for quick zoom in and zoom out functionality.
• Programmeerbare knoppies: Five buttons are programmable via the 3Dconnexion driver software for custom commands and macros.

Figuur 2: Kant view of the CadMouse Pro, illustrating the QuickZoom buttons.

4.2 Smart Mouse Wheel 2

The Smart Mouse Wheel 2 offers adaptive scrolling speed and precision. It can switch between click-to-click and hyper-fast scrolling modes depending on the application and user input.

4.3 QuickZoom

The dedicated QuickZoom buttons allow for instant zooming in and out of your CAD models or documents with a single press. This feature can be configured through the 3Dconnexion software.

5. Onderhoud

5.1 Skoonmaak

To maintain optimal performance and hygiene, clean your CadMouse Pro regularly:

• Ontkoppel die muis van jou rekenaar.
• Gebruik 'n sagte, pluisvrye lap effens dampeindig met water of 'n ligte skoonmaakoplossing.
• Wipe the surface of the mouse gently. Avoid excessive moisture.
• Moenie harde chemikalieë, skuurmiddels of oplosmiddels gebruik nie.
• Clean the optical sensor on the underside with a dry cotton swab if necessary.

Figuur 3: Voorkant view of the CadMouse Pro, illustrating its ergonomic design.

5.2 Berging

Store the CadMouse Pro in a clean, dry environment away from extreme temperatures and direct sunlight when not in use for extended periods.

6. Probleemoplossing

If you encounter issues with your CadMouse Pro, refer to the following common solutions:

• Muis reageer nie:
  • Ensure the USB cable is securely connected to both the mouse and the computer.
  • Probeer om die muis aan 'n ander USB-poort te koppel.
  • Herbegin jou rekenaar.
• Knoppe of blaaiwiel werk nie korrek nie:
  • Verify that the 3Dconnexion drivers are installed and up to date.
  • Check the 3Dconnexion control panel for any custom settings that might be interfering.
  • Toets die muis op 'n ander rekenaar om 'n stelselspesifieke probleem uit te sluit.
• Wyserbeweging is wisselvallig of onakkuraat:
  • Maak die optiese sensor aan die onderkant van die muis skoon.
  • Ensure you are using the mouse on a suitable surface (e.g., a mouse pad, not highly reflective surfaces).
  • Check driver settings for sensor sensitivity.

Figuur 4: Onderkant view of the CadMouse Pro, showing the optical sensor.

7. Spesifikasies

8. Waarborg en Ondersteuning

For detailed warranty information, product registration, and technical support, please visit the official 3Dconnexion webwebwerf of kontak hul kliëntediens.

• Amptelik Webwebwerf: www.3dconnexion.com
• Ondersteuningsbladsy: Verwys na die website for specific support contact details and FAQs.