SIGLENT SAG1021I External Arbitrary Waveform Generator User Manual

1. Inleiding

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the SIGLENT SAG1021I External Arbitrary Waveform Generator. The SAG1021I is designed to expand the waveform generation capabilities of compatible SIGLENT oscilloscopes, offering a versatile solution for various testing and measurement applications.

2. Produk verbyview

The SIGLENT SAG1021I is an external module that functions as an arbitrary waveform generator. It integrates seamlessly with specific SIGLENT oscilloscope series to provide a wide range of signal generation functionalities.

This image displays the SIGLENT SAG1021I External Arbitrary Waveform Generator. It is a compact, black rectangular unit with the model number 'SAG1021I', '25MHz 125 MSa/s', and 'Function/Arbitrary Waveform Generator' printed in white on its top surface. The Siglent logo is also visible. On the right side, two silver BNC connectors are present for signal output.

Sleutel kenmerke:

• Compatible with SDS1104X-E, SDS1204X-E, SDS2000X-E Series, and SDS5000X Series oscilloscopes.
• Capable of outputting Sine, Square, Ramp, Pulse, Noise, DC, and 45 built-in waveforms.
• Arbitrary waveforms can be accessed and edited using the EasyWave PC software.

3. Opstelling

3.1 Connecting the SAG1021I

1. Ensure your compatible SIGLENT oscilloscope (e.g., SDS1000X-E, SDS5000X series) is powered off.
2. Locate the dedicated port for the external arbitrary waveform generator on your oscilloscope.
3. Carefully connect the SAG1021I module to this port. Ensure a secure connection.
4. Power on your oscilloscope. The oscilloscope should detect the connected SAG1021I module.

3.2 Activation License

The SAG1021I requires a specific Function Generator Activation License for your oscilloscope model to function correctly. This license is typically purchased separately. Please refer to your oscilloscope's documentation or SIGLENT's official website for details on obtaining and activating the correct license (part number ending with -FG).

4. Bedryfsinstruksies

4.1 Basic Waveform Generation

Once the SAG1021I is connected and activated, you can access its functions through your oscilloscope's interface. Navigate to the waveform generator menu on your oscilloscope. From there, you can select and configure various standard waveforms:

• Sinusgolf: Generate sinusoidal signals with adjustable frequency, amplitude, and offset.
• Vierkantige golf: Produce square wave signals with configurable frequency, amplitude, duty cycle, and offset.
• Ramp Golf: Create ramp (triangle/sawtooth) waveforms.
• Pulse Wave: Generate pulse signals with precise control over pulse width and delay.
• Geraas: Output random noise signals.
• DC: Provide a stable DC voltage uitset.
• Built-in Waveforms: Access a library of 45 pre-defined waveforms for various applications.

4.2 Arbitrary Waveform Generation

For custom waveform creation, utilize the EasyWave PC software. This software allows you to design, edit, and upload arbitrary waveforms to the SAG1021I module. Refer to the EasyWave software manual for detailed instructions on waveform design and transfer.

5. Onderhoud

The SAG1021I is designed for durability and requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Skoonmaak: Use a soft, dry cloth to clean the exterior of the device. Avoid using abrasive cleaners or solvents, which may damage the casing.
• Berging: Store the module in a clean, dry environment away from extreme temperatures, humidity, and direct sunlight when not in use.
• Hantering: Handle the module with care to prevent physical damage to the connectors or internal components.

6. Probleemoplossing

If you encounter issues with your SAG1021I, consider the following troubleshooting steps:

• Module nie opgespoor nie: Ensure the SAG1021I is securely connected to the oscilloscope's dedicated port. Verify that the oscilloscope is powered on and its firmware is up to date.
• Funksionaliteit kwessies: Confirm that the correct Function Generator Activation License has been installed and activated for your specific oscilloscope model. Without the proper license, the module's features will be unavailable.
• Arbitrary Waveforms Not Working: If you experience issues with user-created arbitrary waveforms, especially with specific oscilloscope models (e.g., SDS2202X-E), ensure you are using the latest version of EasyWave software and oscilloscope firmware. If the problem persists, contact SIGLENT technical support for assistance, as compatibility can sometimes be model-specific despite general claims.
• Geen uitsetsein: Check the BNC cable connections from the SAG1021I to your measurement device. Verify that the waveform generator is enabled and configured correctly on the oscilloscope.
• Algemene prestasie: For any unexpected behavior, consult the detailed user manual for your specific SIGLENT oscilloscope model, as it often contains integrated instructions for external modules.

7. Spesifikasies

The following table outlines the key specifications for the SIGLENT SAG1021I External Arbitrary Waveform Generator:

8. Waarborg en Ondersteuning

For information regarding product warranty, technical support, or service, please refer to the official SIGLENT website or contact SIGLENT customer service directly. Ensure you have your product model number (SAG1021I) and purchase details available when seeking support.

For additional resources and documentation, visit the Siglent Store on Amazon or the official Siglent Technologies webwebwerf.