1. Inleiding
Dankie vir die aankoopasing the CHOICEMMED MD300C29 Finger Pulse Oximeter. This device is designed to accurately measure your blood oxygen saturation (SpO2) and pulse rate. It is intended for use by sports and health enthusiasts, such as mountain climbers, skiers, bikers, or anyone interested in measuring their SpO2 and pulse rate. This manual provides essential information for the safe and effective operation of your oximeter. Please read it thoroughly before use and keep it for future reference.
2. Wat is in die boks
Nadat u die pakkie oopgemaak het, maak asseblief seker dat al die volgende items ingesluit is:
- Vingerpunt polsoksimeter
- Lanyard
- Gebruikershandleiding
- 2X AAA-batterye
Image: All items included in the CHOICEMMED MD300C29 package.
3. Produkkenmerke
- Akkuraat en betroubaar: Accurately determine your SpO2 (blood oxygen saturation levels), pulse rate, and pulse strength in 10 seconds and display it conveniently on a large digital LED display.
- Full SpO2 Value: The only LED pulse oximeter that can read and display up to 100% for SpO2.
- Sport/Health Enthusiasts: For sports enthusiasts like mountain climbers, skiers, bikers, or anyone interested in measuring their SpO2 and pulse rate. SpO2 and Pulse Rate now faces instead of away from the user for an easy read.
- Accommodates Wide Range of Finger Sizes: Finger chamber with SMART Spring System. Works for ages 12 and above.
- Loaded with Accessories: Includes 2X AAA BATTERIES that will allow the pulse oximeter to be used right out of the box, and a LANYARD for convenience.
Beeld: Gedetailleerd view of the OLED display features.
4. Produk verbyview en komponente
The CHOICEMMED MD300C29 Finger Pulse Oximeter is designed for ease of use and accurate readings. Familiarize yourself with its key components:
Image: Labeled diagram of the oximeter's external features.
Image: Internal components of the oximeter.
5. Opstelling
5.1 Battery installasie
Your oximeter requires 2 AAA batteries (included). Follow these steps to install them:
- Maak die batterykompartement se deksel aan die agterkant van die toestel oop.
- Insert the two AAA batteries according to the polarity indicators (+ and -) inside the compartment.
- Maak die batterykompartement se deksel stewig toe.
5.2 Aanvanklike gebruik
Before taking your first measurement, ensure the batteries are correctly installed.
Image: The CHOICEMMED MD300C29 Finger Pulse Oximeter ready for use.
6. Bedryfsinstruksies
6.1 Neem 'n meting
Follow these simple steps for a fast and accurate measurement:
- Open Oximeter: Gently squeeze the oximeter to open the finger chamber.
- Place your Finger in the Oximeter: Insert one of your fingers (preferably the index or middle finger) into the rubber opening of the oximeter, ensuring your fingernail is facing upwards.
- Druk die kragknoppie: Druk een keer die kragknoppie om die toestel aan te skakel.
- Waiting for Results: Keep your hand still. The readings for SpO2 and pulse rate will appear on the display within a few seconds.
Image: Step-by-step guide for taking a measurement.
6.2 Vertoonmodusse
The MD300C29 features a patented multi-directional display, allowing for easy viewing from various angles. Press the power button briefly while the device is on to cycle through the available display modes (4 directions, 6 modes).
Image: Multi-directional display options.
7. Onderhoud
7.1 Skoonmaak
- Maak die oppervlak van die oksimeter skoon met 'n sagte lapampened with medical alcohol (70% ethanol or isopropanol) after each use.
- Do not immerse the device in water or any other cleaning solution.
- Ensure the device is completely dry before reuse.
7.2 Berging
- Store the oximeter in a cool, dry place, away from direct sunlight, high temperatures, and moisture.
- Indien die toestel nie vir 'n lang tydperk gebruik gaan word nie, verwyder die batterye om lekkasie en skade te voorkom.
7.3 Batteryvervanging
When the low battery indicator appears on the display, replace the batteries immediately to ensure accurate readings. Refer to section 5.1 for battery installation instructions.
8. Probleemoplossing
If you encounter any issues with your oximeter, please refer to the table below for common problems and their solutions:
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| No display after turning on | Batterye is leeg of verkeerd geïnstalleer. | Replace batteries or re-install them correctly, observing polarity. |
| Display shows '---' or unstable readings | Finger not inserted properly, finger too small/large, or excessive movement. | Re-insert finger correctly, ensure it's still, try a different finger. |
| Toestel skakel outomaties af | Normal auto-off feature (after 8 seconds of no signal) or low battery. | This is normal. If unexpected, check battery level. |
| Readings seem inaccurate | Cold fingers, nail polish, artificial nails, or poor circulation. | Warm hands, remove nail polish/artificial nails, ensure good circulation. |
9. Spesifikasies
| Spesifikasie | Waarde |
|---|---|
| Handelsmerk | KEUSE GEMENG |
| Model | MD300C29 |
| Kleur | Blou |
| Aantal batterye | 2 AAA-batterye benodig (ingesluit) |
| Batterylewe | 32 ure |
| Item gewig | 90 g |
| Produkafmetings (LxBxH) | 5.5 x 4 x 3 cm |
| Vervaardiger | Beijing Choice Electronics Technology Company Limited |
| Land van oorsprong | Italië |
10. Waarborg en Ondersteuning
The CHOICEMMED MD300C29 Finger Pulse Oximeter comes with a 12 maande waarborg vanaf die aankoopdatum. Hierdie waarborg dek vervaardigingsdefekte en materiaalfoute onder normale gebruik.
For technical support, warranty claims, or any questions regarding your device, please contact the retailer or the manufacturer's customer service department. Please have your purchase receipt and product model number ready when contacting support.