Bellman & Symfon Smoke Alarm Transmitter

1. Inleiding

This manual provides essential information for the proper installation, operation, and maintenance of your Bellman & Symfon Smoke Alarm Transmitter (Model BE1284-433). This device is designed to integrate with the Bellman Visit Smart Home System, providing early fire detection and transmitting alerts to compatible Visit receivers, particularly beneficial for individuals who are deaf or hard of hearing.

Lees asseblief hierdie handleiding deeglik deur voordat u die produk gebruik om veilige en effektiewe werking te verseker.

2. Veiligheidsinligting

• Belangrik: This smoke alarm transmitter is a component of the Bellman Visit Smart Home System and requires a compatible Bellman Visit receiver (sold separately) to provide alerts. It does not function as a standalone audible smoke alarm.
• Do not paint the smoke alarm. Paint can clog the openings and interfere with the sensor's ability to detect smoke.
• Moenie installeer in gebiede met hoë humiditeit, uiterste temperature of oormatige stof nie.
• Test the smoke alarm regularly as described in the "Operation" section.
• Replace batteries promptly when indicated.
• Keep out of reach of children unless supervised.

3. Pakketinhoud

Verifieer dat alle items in die pakket teenwoordig is:

• Bellman & Symfon Smoke Alarm Transmitter (BE1284-433)
• Montagebeugel
• Skroewe en muurproppe
• Gebruikershandleiding (hierdie dokument)
• Battery (pre-installed or separate, check packaging)

Image: The Bellman & Symfon Smoke Alarm Transmitter shown with its retail packaging.

4. Produk verbyview

4.1 Komponente

The Bellman & Symfon Smoke Alarm Transmitter consists of the following main parts:

• Rooksensor: Detects smoke particles.
• Test & Silence Button: Used for testing the alarm and temporarily silencing nuisance alarms.
• LED-aanwysers: Provide visual feedback on status (e.g., power, alarm, fault).
• Battery kompartement: Huisves die kragbron.
• Monteerplaat: For secure installation on a ceiling or wall.

Image: The smoke alarm transmitter installed on a ceiling, showing its compact design.

4.2 Kenmerke

• Wireless transmission to Bellman Visit receivers.
• Long battery life (up to 10 years).
• Integrated Test & Silence button.
• "Toast Mode" for temporary sensitivity reduction in cooking areas.
• Designed for individuals who are deaf or hard of hearing, seniors, and assisted living environments.

5. Opstelling

5.1 Die keuse van 'n ligging

Install the smoke alarm transmitter on the ceiling in the center of a room or hallway. If ceiling mounting is not possible, it can be mounted on a wall, ensuring the top edge is between 4 to 12 inches (10 to 30 cm) from the ceiling.

Avoid installing in:

• Kitchens or bathrooms (due to steam and cooking fumes).
• Near ventilation openings, windows, or doors.
• Areas with extreme temperatures (below 4°C / 39°F or above 38°C / 100°F).

5.2 Installasie

1. Berei die monteerplaat voor: Detach the mounting plate from the smoke alarm by twisting it counter-clockwise.
2. Merk boorgate: Hold the mounting plate against the chosen ceiling or wall location and mark the positions for the drill holes.
3. Boor en Monteer: Drill holes, insert wall plugs (if necessary), and secure the mounting plate with the provided screws.
4. Attach the Transmitter: Align the smoke alarm transmitter with the mounting plate and twist it clockwise until it clicks securely into place.

Image: Dimensions of the smoke alarm transmitter: Height 4.7" (120 mm), Width 4.7" (120 mm), Depth 1.8" (46 mm), Weight 0.41 lb (185 g) including battery.

5.3 Pairing with a Visit Receiver

To receive alerts, the smoke alarm transmitter must be paired with a Bellman Visit receiver (e.g., Flash Receiver, Alarm Clock Receiver, Pager Receiver, Portable Receiver). Refer to your Visit receiver's manual for specific pairing instructions. Generally, the process involves:

1. Put your Visit receiver into pairing mode.
2. Press and hold the Test & Silence button on the smoke alarm transmitter until the LED indicator flashes, indicating it's sending a pairing signal.
3. Confirm successful pairing on your Visit receiver.

Image: An illustration showing various Bellman Visit transmitters (including the smoke alarm) and receivers placed throughout a home, demonstrating system integration.

6. Operasie

6.1 Initial Test

After installation and pairing, perform an initial test:

• Druk en hou die Test & Silence knoppie vir 'n paar sekondes.
• The smoke alarm will emit a test signal, and your paired Visit receiver should activate (e.g., flash lights, vibrate).
• If the receiver does not respond, re-check pairing and ensure the transmitter is within range.

6.2 Normale werking

The smoke alarm transmitter continuously monitors for smoke. Upon detection, it will:

• Activate its internal alarm (if equipped, though primarily designed for transmission).
• Transmit an alarm signal to all paired Bellman Visit receivers within range.

Image: The smoke alarm transmitter detecting smoke, indicated by a red LED and smoke visually rising.

6.3 Silence Function (Toast Mode)

The "Toast Mode" allows for temporary reduction of sensitivity to prevent nuisance alarms from cooking fumes. To activate:

• When a nuisance alarm occurs (e.g., from cooking), press the Test & Silence knoppie.
• The alarm will be silenced for approximately 10 minutes, and the sensitivity will be reduced.
• After 10 minutes, the alarm will automatically return to normal sensitivity.

Image: A kitchen setting with the smoke alarm installed, illustrating the use of "Toast Mode" to reduce sensitivity during cooking.

7. Onderhoud

7.1 Gereelde Toetsing

Test the smoke alarm transmitter weekly by pressing the Test & Silence button. Ensure your paired Visit receiver responds correctly.

7.2 Skoonmaak

Clean the exterior of the smoke alarm transmitter at least once a month using a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Do not open the unit for cleaning.

7.3 Batteryvervanging

The smoke alarm transmitter is designed for long battery life (up to 10 years). When the battery is low, the unit will typically indicate this with a specific LED flash pattern or a signal to the Visit receiver. Replace the battery immediately when indicated. Refer to the product's internal markings for the correct battery type (usually a non-rechargeable lithium battery).

1. Twist the smoke alarm counter-clockwise to remove it from its mounting plate.
2. Maak die batterykompartement oop.
3. Verwyder die ou battery en gooi dit weg volgens plaaslike regulasies.
4. Plaas die nuwe battery in en maak seker dat die polariteit korrek is.
5. Close the battery compartment and reattach the smoke alarm to its mounting plate.
6. Perform a test as described in Section 6.1.

8. Probleemoplossing

9. Spesifikasies

10. Waarborg en Ondersteuning

10.1 30-Day Money Back Guarantee

Bellman & Symfon offers a risk-free refund for all products within 30 days of purchase. If you are not satisfied with your product, please contact customer support for assistance.

10.2 Kliëntediens

For any questions, technical assistance, or support regarding your Bellman & Symfon product, please contact us:

• Tolvry: (833) KLOKKIEMAN / (833) 235 5626
• E-pos: ondersteuning.bsn@bellman.com