femometer DMT-2032
Femometer Digital Thermometer DMT-2032 User Manual
Model: DMT-2032
1. Inleiding
This manual provides detailed instructions for the safe and effective use of your Femometer Digital Thermometer, model DMT-2032. This device is designed for accurate temperature measurement for adults and children via oral, rectal, or underarm methods. Please read this manual thoroughly before first use and keep it for future reference.

Image 1: Femometer Digital Thermometer DMT-2032 with its retail packaging.
2. Produkkenmerke
- Akkurate meting: Utilizes an advanced sensory probe for precise temperature detection.
- Veelsydige gebruik: Suitable for oral, rectal, and underarm temperature measurement for all ages.
- LCD skerm vertoon: Clear digital display for easy reading.
- Herroep geheue: Stores the last measured temperature reading.
- Fever Alert: Provides an audible beep when measurement is complete, and may indicate fever.
- C/F Switchable: Easily switch between Celsius (°C) and Fahrenheit (°F) units.
- Lae battery waarskuwing: Dui aan wanneer die battery vervang moet word.
- Outo-afskakeling: Automatically shuts down to conserve battery life.
- Waterproof Tip: Allows for simple and hygienic cleaning.
- Protective Storage Case: Included for convenient storage and portability.

Beeld 2: verbyview of the thermometer's key features.
3. Opstelling
3.1. Battery Installasie
The Femometer Digital Thermometer comes with one LR41 battery pre-installed. If the battery needs replacement, follow these steps:
- Gently slide off the battery cover located at the end of the thermometer.
- Remove the old LR41 battery.
- Insert a new LR41 battery with the positive (+) side facing up.
- Plaas die batterydeksel veilig terug.
3.2. Aanvanklike aanskakeling
Press the power button to turn on the thermometer. A short beep will sound, and the display will show all segments briefly, followed by the last measured temperature. Then, 'Lo' with a flashing '°C' or '°F' will appear, indicating the thermometer is ready for measurement.
4. Bedryfsinstruksies
4.1. Neem 'n meting
- Ensure the thermometer is clean and disinfected.
- Druk die kragknoppie om die toestel aan te skakel.
- Position the thermometer according to the desired measurement method (oral, rectal, or underarm).
- Hold the thermometer in place until a series of beeps indicates the measurement is complete. For accurate readings, continue holding for approximately 60 seconds after the initial beep.
- Lees die temperatuur wat op die LCD-skerm vertoon word.
- Druk die aan/af-knoppie om die termometer af te skakel, anders sal dit outomaties afskakel na ongeveer 10 minute se onaktiwiteit.

Image 3: The thermometer can be used for oral, rectal, and underarm temperature measurement.
4.2. Measurement Methods
- Mondelinge gebruik: Place the tip of the thermometer under the tongue. Close your mouth and hold the thermometer in place.
- Rektale gebruik: Lubricate the tip with a water-soluble jelly. Gently insert the tip into the rectum (approximately 0.5 inches for infants). This method is generally recommended for infants and young children.
- Onderarm (oksel) Gebruik: Place the tip of the thermometer in the armpit, ensuring good skin contact. Hold the arm firmly against the body. This method may provide less accurate readings than oral or rectal methods.

Image 4: Oral temperature measurement.

Image 5: Rectal temperature measurement.

Image 6: Underarm temperature measurement.
4.3. Skakeltemperatuureenhede (°C/°F)
To switch between Celsius and Fahrenheit, ensure the thermometer is off. Press and hold the power button for approximately 3-5 seconds until the unit changes on the display.

Image 7: Switching between Celsius and Fahrenheit.
5. Onderhoud
5.1. Skoonmaak en ontsmetting
The thermometer tip is waterproof and can be cleaned easily. After each use, wipe the tip with a soft cloth moistened with rubbing alcohol (70% isopropyl alcohol) or an antiseptic solution. Do not immerse the entire thermometer in water or any cleaning solution.

Image 8: The waterproof tip allows for easy cleaning.
5.2. Battery vervanging
When the low battery indicator (a flashing battery icon) appears on the display, it is time to replace the LR41 battery. Refer to section 3.1 for battery installation instructions.

Image 9: Low battery alarm indication.
5.3. Berging
Store the thermometer in its protective case in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Probleemoplossing
If you encounter any issues with your thermometer, please refer to the table below for common problems and their solutions.
| Foutboodskap | Probleem | Oplossing |
|---|---|---|
| Lo | Die temperatuur wat geneem word, is laer as 90.0 ° F (32.0 ° C). | Turn off, wait one minute, and take a new temperature via close contact and sufficient rest. |
| Hi | Temperature taken is higher than 109.9°F (42.9°C). | Turn off, wait one minute, and take a new temperature via close contact and sufficient rest. |
| Fout | Die stelsel funksioneer nie behoorlik nie. | Unload the battery, wait for 1 minute, and repower it. If the message reappears, contact the retailer for service. |
| Battery Icon Flashing | Dead battery; battery icon is flashing, cannot be measured. | Vervang die battery. |

Image 10: Troubleshooting guide for common display messages.
7. Spesifikasies
| Modelnommer | DMT-2032 |
| Produk afmetings | 5.9 x 2.1 x 0.8 duim |
| Gewig | 1.13 onse |
| Kragbron | 1 x LR41 battery (included) |
| Tipe vertoon | Digitale LCD |
| Meting Akkuraatheid | ± 0.1 ° C / 0.2 ° F |
| Spesiale kenmerke | High Accuracy, Fever Alert, Memory Recall, C/F Switchable, Waterproof Tip, Auto Off |
| Buite materiaal | Plastiek |
| Produkversorging | Vee skoon |
| Vervaardiger | JOYTECH Healthcare Co., Ltd. |
8. Waarborg en Ondersteuning
Femometer is committed to providing reliable products and customer satisfaction.
- Lifetime Unlimited Warranty: Your Femometer Digital Thermometer is backed by a lifetime warranty.
- Kliëntediens: Dedicated 24/7 customer support is available to assist you with any questions or concerns.
- Sertifiserings: This product is FDA/MDL/CE certified, ensuring quality and safety standards.

Image 11: Reliable brand information including certifications and support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.