1. Inleiding
Thank you for choosing the Stack-On PS-1820-E Personal Security Large Safe. This safe is designed to provide secure storage for your valuables, documents, and firearms. Featuring an advanced electronic lock with biometric (fingerprint) capabilities, it offers both convenience and robust protection. Please read this manual thoroughly before setting up and operating your safe to ensure proper function and maximum security.
2. Veiligheidsinligting
- Keep Keys Secure: If your safe includes override keys, store them in a secure location away from the safe itself. Do not store them inside the safe.
- Batteryveiligheid: Use only the specified type and number of batteries. Do not mix old and new batteries or different types of batteries. Remove batteries if the safe will not be used for an extended period.
- Montering: For optimal security, it is highly recommended to bolt the safe to a floor or wall. Ensure the mounting surface is structurally sound.
- Kinders: Do not leave children unattended near the safe. The safe is not a toy.
- Noodtoegang: Familiarize yourself with all methods of opening the safe, including emergency override procedures.
3. Pakketinhoud
Verifieer asseblief dat alle items in u pakket teenwoordig is:
- Stack-On PS-1820-E Personal Security Large Safe
- Electronic Keypad Assembly
- Emergency Override Keys (2)
- Monteringshardeware (boute, wassers)
- Gebruikershandleiding (hierdie dokument)
4. Opstelling
4.1 Uitpak
Carefully remove the safe from its packaging. Inspect the safe for any signs of damage. If damage is found, contact customer support immediately.
4.2 Battery installasie
The electronic lock requires 4 AA alkaline batteries (not included). To install:
- Locate the battery compartment on the back of the electronic keypad.
- Skuif die batterydeksel af.
- Plaas 4 nuwe AA alkaliese batterye in en maak seker dat die polariteit (+/-) korrek is.
- Vervang die batterydeksel.
- Test the keypad by pressing any button; the backlight should illuminate.
4.3 Initial Code Setup
Your safe comes with a factory default code. It is crucial to change this immediately.
- Met die kluisdeur oop, vind die rooi herstelknoppie aan die binnekant van die deur, naby die skarnier.
- Press the red reset button. You will hear a beep, and the keypad will illuminate.
- Within 5 seconds, enter your new 3-8 digit personal code on the keypad.
- Press the '✓' (checkmark) button to confirm. You will hear a confirmation beep.
- Test your new code with the door open to ensure it works before closing the safe.
4.4 Vingerafdrukregistrasie
The safe allows for multiple fingerprint registrations. To enroll a fingerprint:
- With the safe door open, press the red reset button on the inside of the door.
- Place your finger firmly on the fingerprint sensor. The sensor will scan your finger.
- Lift and reposition your finger slightly, then place it on the sensor again. Repeat this process 3-5 times until you hear a confirmation beep, indicating successful enrollment.
- Test the enrolled fingerprint with the door open to ensure it works.
4.5 Montering van die kluis
Although the safe is freestanding, bolting it down significantly enhances security. The safe can be bolted to a floor or wall.
- Choose a suitable location, ensuring the mounting surface is solid and secure.
- Open the safe door and locate the pre-drilled mounting holes on the bottom or back panel.
- Position the safe and mark the drilling points through the holes onto the mounting surface.
- Move the safe and drill pilot holes using an appropriate drill bit for your surface (e.g., masonry bit for concrete, wood bit for studs).
- Reposition the safe over the pilot holes.
- Secure the safe using the provided mounting hardware (bolts and washers). Tighten firmly.
5. Bediening van die kluis
5.1 Opening with Electronic Code
- Enter your 3-8 digit personal code.
- Press the '✓' (checkmark) button.
- If the code is correct, you will hear a beep, and the safe will unlock for a few seconds.
- Draai die handvatsel kloksgewys om die deur oop te maak.
5.2 Oopmaak met vingerafdruk
- Place your enrolled finger firmly on the fingerprint sensor.
- If the fingerprint is recognized, you will hear a beep, and the safe will unlock for a few seconds.
- Draai die handvatsel kloksgewys om die deur oop te maak.
5.3 Die kluis toemaak en sluit
- Maak die kluisdeur stewig toe.
- Turn the handle counter-clockwise until it is fully engaged. The safe will automatically lock.
5.4 Emergency Override Key
In case of battery failure or forgotten code, the safe can be opened using the emergency override key.
- Locate the keyhole, usually concealed behind a small cover on the keypad assembly.
- Verwyder die deksel.
- Insert the emergency override key and turn it clockwise.
- Terwyl jy die sleutel gedraai hou, draai die handvatsel kloksgewys om die deur oop te maak.
- Sodra dit oop is, verwyder die sleutel.
6. Onderhoud
6.1 Batteryvervanging
When the batteries are low, the keypad may emit a warning beep or the backlight may dim. Replace batteries promptly to avoid being locked out.
- Volg die stappe in Afdeling 4.2 vir die installering van die battery.
- Always replace all 4 AA batteries at the same time with new alkaline batteries.
6.2 Skoonmaak
Clean the safe exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components. Keep the fingerprint sensor clean and dry for optimal performance.
7. Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Kluis maak nie met kode oop nie. | Incorrect code entered; batteries low/dead; code not confirmed. | Re-enter code carefully. Replace batteries. Use emergency key. |
| Kluis maak nie oop met vingerafdruk nie. | Finger not properly placed; unregistered fingerprint; sensor dirty; batteries low/dead. | Ensure finger is clean and dry, cover sensor completely. Re-enroll fingerprint. Clean sensor. Replace batteries. |
| Die sleutelbord reageer nie. | Dooie batterye; elektroniese wanfunksie. | Replace batteries. Use emergency key. If issue persists, contact support. |
| Door will not close/lock. | Obstruction; locking bolts misaligned. | Check for items blocking the door. Ensure safe is on a level surface. |
8. Spesifikasies
This image displays the Stack-On PS-1820-E Personal Security Large Safe. The safe is black with a matte finish. On the front door, an electronic keypad is visible, featuring numbered buttons from 0-9, a checkmark button, and a red 'X' button. A circular handle is integrated into the keypad assembly, positioned to the left of the buttons. The safe appears to be a compact, cube-like structure, designed for secure storage.
| Kenmerk | Detail |
|---|---|
| Modelnommer | PS-1820-E |
| Handelsmerk | Stapel-aan |
| Tipe slot | Backlit Biometric | Electronic |
| Spesiale kenmerk | Vingerafdruksensor |
| Materiaal | Meng |
| Kleur | Veelvuldig |
| Montage tipe | Vrye staande |
| Item gewig | 43.6 pond |
| Produk afmetings | 1 x 1 x 1 inches (Note: Please verify actual dimensions as this may be a placeholder.) |
| Waterweerstandvlak | Nie waterbestand nie |
| UPC | 085529018200 |
9. Waarborginligting
Stack-On products are manufactured to high-quality standards. This safe is covered by a limited warranty against defects in materials and workmanship. The specific terms and duration of your warranty may vary. Please refer to the warranty card included with your purchase or visit the official Stack-On webwebwerf vir gedetailleerde waarborginligting en registrasie.
10. Kliëntediens
If you have any questions, require assistance with setup, or encounter issues not covered in this manual, please contact Stack-On customer support. Have your model number (PS-1820-E) and purchase information ready when contacting support.
- Webwebwerf: www.stack-on.com (Please check for the most current contact information.)
- Telefoon: Refer to the Stack-On webwebwerf vir huidige kliëntediens telefoonnommers.