Rapid Charger for Two-Way Radios

1. Produk verbyview

This rapid charger is engineered to efficiently charge batteries for a wide range of two-way radios. It supports multiple battery chemistries including Ni-CD, Ni-MH, and Li-ion, offering versatility and convenience. The charger incorporates advanced microprocessor control for optimal charge management and protection against overcharging.

Key features include a universal 100-240V input voltage, a clear LED indicator for charging status, and a rapid charging rate of up to 1000mAh per hour. The package typically includes one charger base and one AC power adapter.

Image: The WPLN4232 rapid charger base and its accompanying AC power adapter, shown connected and ready for use.

2. Opstelinstruksies

1. Connect the AC Power Adapter: Insert the DC plug of the AC power adapter into the power input port located at the back of the charger base.


Beeld: 'n Nabyskoot view of the back of the charger base, highlighting the power input port where the AC adapter connects.

2. Prop in kragaansluiting: Plug the AC power adapter into a standard 100-240V wall outlet.
3. Initial Power Check: Once connected to power, the charger's LED indicator may briefly illuminate to confirm power reception.

3. Bedryfsinstruksies

1. Plaas battery in: Carefully slide the battery (or radio with battery attached) into the charging slot of the charger base. Ensure the battery contacts align correctly with the charger's pins.


Beeld: 'n Gedetailleerde view of the charger's slot, showing the contact pins where the radio battery connects for charging.

2. Monitor laaistatus: The LED indicator on the charger will display the charging status:
   • Rooi LED: Dui aan dat die battery tans laai.
   • Groen LED: Dui aan dat die battery ten volle gelaai is.


Image: The underside of the charger base, illustrating the LED indicator and its corresponding charging status (red for charging, green for fully charged).

3. Verwyder battery: Once the LED turns green, the battery is fully charged and can be removed from the charger.

Compatible Radio Models:

• XPR Series: XPR4380, XPR6100, XPR6300, XPR6350, XPR6380, XPR6500, XPR6550, XPR6580, XPR8300, XPR3000, XPR3500, XPR3300, XPR7000, XPR7550, XPR7350, XPR7580, XPR7380, XPR3000e, XPR3500e, XPR3300e, XPR7000e, XPR7550e, XPR7350e, XPR7580e, XPR7380e
• DP Series: DP3400, DP3401, DP3600, DP3601, DP4000, DP4400, DP4401, DP4600, DP4601, DP4800, DP4801
• DGP Series: DGP4150, DGP4150+, DGP6150, DGP6150+
• APX & R Series: APX4000, APX3000, APX1000, R7, R7A
• XiRP Series: XiRP8200, XiRP8208, XiRP8260, XiRP8268

Compatible Battery Models:

• PMNN4065, PMNN4066, PMNN4066A, PMNN4069, PMNN4077, PMNN4077C, PMNN4409, PMNN4409AR, PMNN4407, PMNN4807, PMNN4807A, PMNN4808, PMNN4808A, PMNN4809, PMNN4809A, PMNN4810, PMNN4810A, PMNN4407, PMNN4412, PMNN4435, PMNN4448, PMNN4489, PMNN4491, PMNN4493, PMNN4889, NNTN8128, NNTN8129, NNTN8287

4. Onderhoud

• Skoonmaak: Regularly wipe the charger base and contacts with a dry, soft cloth to prevent dust and debris buildup. Do not use liquid cleaners or solvents.
• Berging: Bêre die laaier op 'n koel, droë plek weg van direkte sonlig en uiterste temperature wanneer dit nie gebruik word nie.
• Hantering: Vermy om die laaier te laat val of dit aan harde impakte bloot te stel, wat interne komponente kan beskadig.

5. Probleemoplossing

• Laaier skakel nie aan nie:
  • Ensure the AC power adapter is securely connected to both the charger base and a working wall outlet.
  • Verifieer dat die aansluiting aktief is.
• Battery Not Charging (Red LED not lit):
  • Check that the battery is properly seated in the charging slot and its contacts are aligned with the charger pins.
  • Inspect battery and charger contacts for dirt or damage. Clean if necessary.
  • The charger includes features for un-chargeable and low-health battery detection. If the battery is severely damaged or at the end of its life, it may not charge.
• Stadige laai:
  • Ensure the charger is used within its specified operating temperature range.
  • Verify that the battery is compatible with this rapid charger.

6. Spesifikasies

7. Waarborg en Ondersteuning

Specific warranty information for this product is not provided in the available documentation. For details regarding warranty coverage, please refer to the product packaging or contact the seller directly.

For technical support or further assistance, please reach out to the seller or manufacturer through their official contact channels.