myTouchSmart 48707 Rotatable Outdoor Digital Yard Stake Timer Instruction Manual

Inleiding

This manual provides detailed instructions for the safe and efficient operation of your myTouchSmart 48707 Rotatable Outdoor Digital Yard Stake Timer. Please read this manual thoroughly before installation and use, and retain it for future reference. This device is designed to automate outdoor lighting and other electrical appliances with programmable on/off times, light-sensing technology, and multiple grounded outlets.

Belangrike veiligheidsinligting

• Risiko van elektriese skok: Use only with a GFCI-protected outdoor outlet. Do not immerse in water.
• Behoorlike aarding: Maak seker dat die timer behoorlik geaard is.
• Oorladingsbeskerming: Do not exceed the maximum electrical rating of 125V, 60 Hz, 1875W (15A) general/resistive.
• Plasing: Place the stake in a location with direct access to sunlight for optimal light sensor function. Ensure the unit is at least 1 foot above ground level to prevent waterlogging.
• Uitlaatdeksels: Keep individual self-closing protective outlet covers closed when not in use to prevent moisture and debris entry.
• Koordbestuur: Route cords to prevent tripping hazards and damage.
• Onderhoud: Ontkoppel die kragtoevoer voordat enige onderhoud of skoonmaak uitgevoer word.

Pakketinhoud

• myTouchSmart Rotatable Outdoor Digital Yard Stake Timer (Model 48707)
• Ground Stake (multi-section)
• Instruksie Handleiding

Produk Kenmerke

• Rotatable Outlets: Six grounded outlets, three of which rotate 180 degrees for flexible access.
• Digitale timer: Programmable with custom ON/OFF times.
• Ligsensor: Automatic dusk-to-dawn operation or 6-hour countdown after sunset.
• Weerbestand: Durable construction with self-closing protective outlet covers.
• 10ft Cord: Provides extended reach for outdoor placement.
• Oorladingsbeskerming: Integrated 15A/1875W circuit breaker for safety.

Opstelling

1. Stel die ring bymekaar: Attach the stake sections together and then to the timer unit.
2. Plasing: Insert the assembled stake firmly into the ground in your desired outdoor location. Ensure the timer unit is at least 1 foot above ground level and has direct access to sunlight if using light-sensing features.
3. Aanvanklike kragverbinding: Plug the timer's power cord into a GFCI-protected outdoor outlet. If the display is blank, allow the timer to charge for at least 30 minutes to power the internal battery.
4. Stel die timer terug: Using a small, non-metallic, insulated tool (like a pencil tip or toothpick), press the TERUGSTEL button located on the control panel. The LCD display will illuminate and show "12:00 AM".
5. Koppel toestelle: Plug your outdoor lights or appliances into the grounded outlets. Rotate the outlets as needed for optimal cord management. Close the protective covers over unused outlets.

Bedryfsinstruksies

1. Setting Day & Time

1. Druk en hou die KLOK knoppie.
2. Terwyl jy vashou KLOK, druk die WEEK button repeatedly until the desired day of the week appears at the top of the display.
3. Hou aan hou KLOK, en druk die UUR button repeatedly to set the current hour (AM/PM will adjust automatically).
4. Still holding KLOK, druk die MIN knoppie herhaaldelik om die huidige minuut in te stel.
5. Los die KLOK knoppie om die instellings te stoor.

2. Setting Programs (ON/OFF Times)

The timer allows for two custom ON/OFF programs. Follow these steps for each program:

1. Druk die PROG button once. The display will show "1 ON" at the bottom left. This indicates you are setting the ON time for Program 1.
2. Druk die WEEK button repeatedly to select the desired day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or various combinations).
3. Druk die UUR button to set the desired ON hour.
4. Druk die MIN button to set the desired ON minute.
5. Druk die PROG button again. The display will show "1 OFF". This indicates you are setting the OFF time for Program 1.
6. Repeat steps 2-4 to set the desired OFF day(s), hour, and minute for Program 1.
7. To set Program 2, press the PROG button again until "2 ON" appears, then repeat steps 2-6.
8. Nadat al die verlangde programme ingestel is, druk die KLOK knoppie om terug te keer na die hoofskerm.

To clear a program: Terwyl viewing the program (e.g., "1 ON" or "1 OFF"), press the R (Reset) button. Four dashes will appear, indicating the program is cleared. Press R again to reactivate it.

3. Auto/Manual Settings

To use your programmed settings, the timer must be in AUTO mode. To switch between modes:

• Druk en hou die HANDLEIDING button for 4 seconds. The display will cycle through AUTO ON, AUTO OFF, and MANUAL.
• AUTO AAN: The timer will remain ON until the next programmed OFF time.
• AUTO AF: The timer will remain OFF until the next programmed ON time.
• HANDLEIDING: The timer will ignore all programmed settings and act as a simple ON/OFF switch.

4. Light Sensor Modes (Dusk-to-Dawn, Countdown)

The timer features light-sensing technology for automatic operation based on ambient light. Ensure the light sensor (located on the top of the unit) is unobstructed and receives direct sunlight for optimal performance.

• Skemer-tot-dagbreek: The timer will automatically turn ON at dusk and remain ON until dawn.
• Aftel-afteller: The timer will turn ON at dusk and remain ON for a preset duration (e.g., 6 hours).

Refer to the specific button on your timer labeled "Sensor" or "Timer" to cycle through these modes. The product description mentions "6-Hour Countdown" and "dawn to dusk" as presets.

5. Security/Vacation Mode (Random Function)

This mode randomly adjusts your programmed ON/OFF times to give your home a lived-in appearance, deterring potential intruders. To activate this feature, you must have at least one program set for longer than 33 minutes.

1. Druk die WEEK en UUR buttons simultaneously. "RND" will appear to the right of the display, indicating Random mode is active.
2. In this mode, programmed ON/OFF times will be randomly postponed by 2 to 32 minutes.
3. Om te deaktiveer, druk die WEEK en UUR buttons simultaneously again. "RND" will disappear.

6. Daylight Saving Mode

To adjust the time for Daylight Saving:

1. Druk die UUR en MIN buttons simultaneously. The time will adjust by one hour forward or backward.
2. This function must be manually enabled or disabled as needed.

Onderhoud

• Regularly inspect the timer and cord for any signs of damage, fraying, or wear.
• Keep the light sensor clean and free from debris to ensure accurate dusk/dawn detection.
• Ensure all unused outlets have their protective covers securely closed.
• Maak die eenheid skoon met 'n sagte, damp lap. Moenie harde chemikalieë of skuur skoonmaakmiddels gebruik nie.

Probleemoplossing

Spesifikasies

Waarborg en Ondersteuning

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the myTouchSmart official webwebwerf. Bewaar u aankoopbewys as bewys van aankoop.