Stroomlig 69434
Streamlight 69434 TLR-8A G Flex Pistol Light User Manual
Model: 69434 | Handelsmerk: Streamlight
Inleiding
The Streamlight 69434 TLR-8A G Flex is a compact and durable weapon-mounted light with an integrated green aiming laser, designed for enhanced tactical advantage. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your TLR-8A G Flex.

Figuur 1: Voorkant view of the Streamlight TLR-8A G Flex Pistol Light.
Produk verbyview
Sleutel kenmerke
- Securely attaches to a wide range of handguns via a robust rail clamp stelsel.
- High mode provides a bright 500 lumens with 5000 Candela and a 140-meter beam distance.
- Run time of 1.5 hours with light only.
- Features three user-friendly modes: LED Light Only, LED/Laser Combo, and Laser Only.
- Includes a user-enabled strobe mode for tactical situations.
- Integrated green aiming laser (Class 3R, 510-530nm, <5mW output) for enhanced precision.
- Next-generation rear paddle switch designed for intuitive and seamless operation.
- "Safe Off" feature prevents accidental activation, conserving battery life.
- Durable aluminum construction designed to withstand extreme conditions.
- Liggewig en lae-profile design ensures a seamless fit on your firearm.
Ingesluit komponente
Your Streamlight TLR-8A G Flex package includes the following items:
- 1x CR123A Battery
- High and Low Switches (pre-installed or as alternatives)
- Montageset
- Key Box and Tool (for rail key selection and laser adjustment)
- TLR-8 X G Flashlight unit
- Gebruikershandleiding (hierdie dokument)

Figure 2: The TLR-8A G Flex unit with a CR123A battery, which is included.
Veiligheidsinligting
WAARSKUWING: Hierdie produk bevat chemikalieë wat aan die staat Kalifornië bekend is om kanker en geboortedefekte of ander reproduktiewe skade te veroorsaak.
Always handle firearms safely. Ensure the firearm is unloaded and pointed in a safe direction before attaching, detaching, or performing any maintenance on the TLR-8A G Flex. Avoid direct eye exposure to the laser beam. Do not disassemble the unit beyond what is described in this manual.
Opstelling
Battery installasie
- Unscrew the face cap of the light by twisting it counter-clockwise.
- Insert one CR123A battery with the positive (+) end facing towards the light head.
- Screw the face cap back on clockwise until it is finger-tight. This also serves as the "Safe Off" feature when slightly loosened.
Mounting to Firearm
The TLR-8A G Flex features a rail clamp system for quick and secure attachment without tools.
- Maak seker dat die vuurwapen ongelaai en veilig is.
- Select the appropriate rail key from the included kit that best fits your firearm's rail. Refer to the compatibility list provided by Streamlight for specific handgun models.
- Maak die reling los clamp screw on the TLR-8A G Flex.
- Align the rail key with the cross slot on your firearm's rail.
- Push the TLR-8A G Flex onto the rail until the rail key engages the cross slot.
- Draai die reling styf clamp screw firmly by hand. Ensure the unit is securely attached and does not wobble.

Figure 3: The TLR-8A G Flex comes with various mounting keys for compatibility.
Bedryfsinstruksies
Skakelbewerking
The TLR-8A G Flex features ambidextrous rear paddle switches for activation.

Figure 4: The TLR-8A G Flex can be configured with high or low profile rear paddle switches.
- Oombliklik aan: Press and hold either paddle switch. Release to turn off.
- Konstant aan: Quickly tap either paddle switch. Tap again to turn off.
- Strobe Mode (User-Enabled): From the "Off" position, quickly double-tap either paddle switch and hold on the second tap to activate strobe. Release to turn off. To enable or disable the strobe feature permanently, rapidly tap either switch 9 times, holding on the 10th tap. The light will flash to confirm the change.
Mode Selection (Light, Laser, or Both)
The TLR-8A G Flex offers three operational modes:
- LED Light Only: Provides powerful illumination without the laser.
- LED Light & Laser: Combines the light and laser for enhanced accuracy and visibility.
- Slegs laser: Activates only the green aiming laser for stealth and precision targeting.
To cycle through these modes, press and hold one of the paddle switches, then simultaneously press the other paddle switch. Release both switches to set the desired mode. The unit will remember the last selected mode.

Figure 5: The TLR-8A G Flex with its integrated green aiming laser in operation.
Laser Zeroing (Windage and Elevation Adjustment)
To ensure accurate aiming, the green laser can be adjusted for windage and elevation.
- Using the small hex wrench provided in the kit, locate the windage (side) and elevation (bottom) adjustment screws on the TLR-8A G Flex.
- Make small adjustments, turning the screws incrementally. Turn the windage screw clockwise to move the laser right, counter-clockwise to move it left. Turn the elevation screw clockwise to move the laser down, counter-clockwise to move it up.
- Test the laser's point of impact at your desired zeroing distance and continue to adjust until the laser aligns with your firearm's point of aim.
Note: Some users have reported issues with the included hex wrench size. If you experience stripping, use a high-quality 0.050" hex wrench for adjustment.
Onderhoud
Battery vervanging
When the light output diminishes or the laser becomes dim, it's time to replace the battery. Follow the battery installation steps in the "Setup" section.
- Always use fresh, high-quality CR123A batteries.
- Gooi gebruikte batterye weg volgens plaaslike regulasies.
Skoonmaak
Keep the lens and laser aperture clean for optimal performance.
- Vee die buitekant van die eenheid af met 'n sagte, damp lap.
- For the lens and laser aperture, use a lens cleaning cloth or cotton swab with a small amount of lens cleaning solution. Avoid abrasive materials.
Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Light/Laser does not turn on. | Battery is dead or incorrectly installed. Face cap is loose. | Replace battery, ensuring correct polarity. Tighten face cap fully. |
| Light/Laser is dim. | Low battery. Lens/aperture is dirty. | Replace battery. Clean lens and laser aperture. |
| Laser does not hold zero. | Unit is not securely mounted. Adjustment screws are loose. | Verseker spoor clamp screw is tightened firmly. Re-zero the laser. |
| Cannot activate strobe mode. | Strobe feature is disabled. | Enable strobe mode by rapidly tapping either switch 9 times, holding on the 10th tap. |
Spesifikasies
| Kenmerk | Detail |
|---|---|
| Handelsmerk | Stroomlig |
| Modelnommer | 69434 |
| Ligbrontipe | LED |
| Wit Helderheid | 500 Lumen |
| Brightness (Candela) | 5000 Candela |
| Lig pad afstand | 140 meter |
| Laser tipe | Green Aiming Laser (Class 3R, 510-530nm, <5mW) |
| Kragbron | Battery aangedrewe |
| Battery Tipe | 1x CR123A (included) |
| Looptyd (slegs lig) | 1.5 uur |
| Materiaal | Aluminium |
| Kleur | Swart |
| Produk afmetings | 2.51" D x 1.18" B x 1.5" H |
| Item gewig | 2.72 onse (0.17 pond) |
| Waterweerstandvlak | Water Resistant (Specification Met: IPX4) |
| Montage tipe | Gun Mount (Rail Clamp Stelsel) |
| Spesiale kenmerke | Adjustable Light Modes, Durable, High Lumens, Lightweight, Mountable |
Waarborg & Ondersteuning
Waarborg inligting
The Streamlight 69434 TLR-8A G Flex is covered by a Beperkte lewenslange waarborg. This warranty covers defects in material and workmanship for the lifetime of the product, excluding batteries, bulbs, abuse, and normal wear and tear.
For full details regarding the warranty policy, please refer to the official Streamlight webwebwerf of kontak hul kliëntediens.
Kliënte ondersteuning
For further assistance, technical support, or warranty claims, please visit the official Streamlight webwebwerf of kontak hul kliëntediensafdeling.
Jy kan ook bykomende hulpbronne en produkinligting vind op die Streamlight Brand Store on Amazon.
A PDF version of the user guide may also be available: Gebruikersgids (PDF).
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.