Q Acoustics 3030FSi Floor Stands Instruction Manual

1. Inleiding

The Q Acoustics 3030FSi Floor Stands are specifically designed to complement and optimize the performance of your Q Acoustics 3030i bookshelf speakers. These stands provide a stable and acoustically optimized platform, ensuring your speakers deliver their intended sound quality.

The 3030FSi stands feature a classic and stable triple upright design with acoustically damped columns. They are constructed from precision laser-cut steel, finished in black to match your 3030i speakers.

Belangrike Verenigbaarheidsnota: These stands are exclusively designed for the Q Acoustics 3030i bookshelf speakers. They are nie compatible with the Q Acoustics 3000 Series or other 3010i/3020i bookshelf speakers.

2. Wat is in die boks

Kontroleer asseblief dat alle komponente teenwoordig is voordat u met die montering begin:

• Pair of 3030FSi speaker stands (unassembled)
• Floor spikes (set of 8)
• Assembly bolts and washers

3. Monteer-instruksies

3.1 Vereiste gereedskap

• Hex key (often included with fasteners, or standard size)
• Soft cloth or mat (to protect surfaces during assembly)

3.2 Komponentidentifikasie

3.3 Stap-vir-stap montering

Follow these steps to assemble each speaker stand:

1. Attach Columns to Base: Carefully align the three upright columns with the mounting holes on the base plate. Secure them using the provided bolts and washers. Ensure all bolts are tightened firmly but do not overtighten.
2. Attach Top Plate to Columns: Position the top plate onto the upper end of the columns, aligning the mounting holes. Secure the top plate using the remaining bolts and washers. Ensure a secure fit.



3. Install Floor Spikes: Screw the adjustable floor spikes into the threaded inserts on the underside of the base plate. These spikes help to isolate the stand from the floor, improving sound clarity and stability. Adjust them to level the stand on uneven surfaces.



4. Veilige Sprekers: Place your Q Acoustics 3030i bookshelf speakers onto the top plate of the assembled stands. The 3030FSi stands are designed with mounting points that allow the 3030i speakers to be screwed directly onto the top plate for enhanced stability. Use the appropriate screws provided with your speakers or stands to secure them.

4. Placement and Optimal Use

Proper placement of your speaker stands is crucial for achieving the best audio performance from your Q Acoustics 3030i speakers.

• Stabiliteit: Ensure the stands are placed on a flat, stable surface. Use the adjustable floor spikes to level the stands and minimize any wobbling. For hard floors, consider using protective pads under the spikes.
• Akoestiese Damping: The acoustically damped columns of the 3030FSi stands are designed to reduce unwanted vibrations. Unlike some other speaker stands, filling the columns with sand or other materials is not necessary for optimal performance with these stands.
• Luidsprekerposisionering: Position the stands so that the tweeters of your 3030i speakers are approximately at ear level when you are seated in your primary listening position. Experiment with the distance between the speakers and the distance from walls to find the ideal soundstage and bass response for your room.
• Kabelbestuur: Note that these stands do not feature internal cable routing through the columns. Speaker cables should be managed externally, ensuring they are tidy and do not pose a tripping hazard.

5. Onderhoud

To ensure the longevity and appearance of your Q Acoustics 3030FSi Floor Stands, follow these simple maintenance guidelines:

• Skoonmaak: Wipe the stands regularly with a soft, dry cloth to remove dust. For more stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents, as these can damage the powder-coated finish.
• Inspeksie: Periodically check all bolts and fasteners to ensure they remain tight. Over time, vibrations can cause them to loosen. Re-tighten if necessary, but do not overtighten.
• Spike Adjustment: Re-check the level of your stands occasionally, especially if they have been moved or if the floor surface has settled. Adjust the floor spikes as needed.

6. Probleemoplossing

If you encounter any issues with your speaker stands, consider the following:

• Staan-onstabiliteit: If a stand wobbles, ensure it is on a flat surface. Adjust the floor spikes by screwing them in or out until all four points make firm contact with the floor and the stand is stable.
• Los komponente: If any part of the stand feels loose, check and re-tighten all assembly bolts.
• Swak klankgehalte: While stands primarily provide physical support, improper placement can affect sound. Ensure speakers are securely mounted and stands are level. Experiment with speaker positioning in your room.
• Kabelbestuur: As there is no internal cable management, ensure speaker cables are routed neatly and safely to avoid interference or damage.

7. Spesifikasies

8. Waarborg en Ondersteuning

For detailed warranty information and customer support, please refer to the official Q Acoustics webwebwerf of kontak u gemagtigde handelaar. Bewaar u bewys van aankoop vir enige waarborgeise.