EDUP EP-9651GS-R PCI-E WiFi 6 Network Card with Bluetooth 5.2 Instruction Manual

1. Inleiding

This manual provides comprehensive instructions for the installation, operation, and maintenance of your EDUP EP-9651GS-R PCI-E WiFi 6 Network Card. This device is designed to enhance your desktop PC's wireless connectivity with Wi-Fi 6 (802.11ax) technology and Bluetooth 5.2 capabilities, compatible with Windows 10 and Windows 11 64-bit operating systems. Please read this manual carefully before installation to ensure proper setup and optimal performance.

2. Pakketinhoud

Verifieer dat al die items wat hieronder gelys word in u pakket ingesluit is. Indien enige items ontbreek of beskadig is, kontak asseblief u kleinhandelaar.

• 1 x EDUP EP-9651GS-R PCI-E WiFi 6 Network Card
• 2 x 6dBi Dual Band Antennas
• 1 x Bluetooth 9-pin USB Cable
• 1 x Lae-profile Bracket (for small form factor PCs)
• 1 x skroewedraaier
• Monteer skroewe
• 1 x Driver CD (or download instructions)

3. Opstelling en installering

3.1 Hardeware installasie

Follow these steps to install the network card into your desktop PC. Ensure your computer is powered off and unplugged before proceeding.

1. Berei jou rekenaar voor: Power off your computer and unplug the power cord. Open the side panel of your PC case.
2. Locate a PCI-E slot: Identify an available PCI-E X1, X4, X8, or X16 slot on your motherboard. This card is not compatible with standard PCI slots.
3. Insert the Network Card: Carefully align the network card with the chosen PCI-E slot and press it firmly until it is securely seated.
4. Connect the Bluetooth Cable: Locate the 9-pin USB header (often labeled F_USB) on your motherboard. Connect the white end of the provided Bluetooth 9-pin USB cable to the corresponding port on the network card, and the other end to the 9-pin USB header on your motherboard. This connection is essential for Bluetooth functionality.
   

   Image: The Bluetooth 9-pin USB cable connecting the EDUP WiFi 6 card to the motherboard's USB header.

5. Beveilig die kaart: Use the provided screws to secure the network card's bracket to your PC case. If you have a small form factor PC, use the included low-profile bracket.
6. Heg antennas aan: Screw the two 6dBi dual-band antennas onto the connectors at the back of the network card. Adjust their position for optimal signal reception.
   

   Image: The EDUP WiFi 6 network card with its two external antennas installed on the rear of a PC case.
7. Maak rekenaarkas toe: Replace the side panel of your PC case and reconnect the power cord.

3.2 Bestuurderinstallasie

After hardware installation, you need to install the drivers for both Wi-Fi and Bluetooth functionality. This card is compatible with Windows 10/11 64-bit.

1. Gebruik van die drywer-CD: Insert the provided driver CD into your optical drive and follow the on-screen instructions to install the Wi-Fi and Bluetooth drivers.
2. Downloading Drivers: If your PC does not have an optical drive or if you encounter issues with the CD, download the latest drivers from the official Intel webwebwerf of die EDUP webwerf (szedup.com). Soek vir drivers compatible with the Intel AX200 chipset.
3. Installasie proses: Voer die afgelaaide dryweropstelling uit files. Follow the prompts, accepting the license agreements and completing the installation. A system restart may be required after installation.

4. Bedryfsinstruksies

4.1 Koppel aan Wi-Fi

Once the drivers are installed, you can connect to a wireless network:

1. Click the Wi-Fi icon in the system tray (usually in the bottom-right corner of your screen).
2. Kies jou verlangde Wi-Fi-netwerk uit die lys.
3. Click "Connect" and enter the network security key (password) if prompted.
4. Your PC should now be connected to the Wi-Fi network.

4.2 Verbind Bluetooth-toestelle

To connect Bluetooth devices, ensure the Bluetooth 9-pin cable is correctly installed.

1. Gaan na Windows-instellings > Toestelle > Bluetooth en ander toestelle.
2. Ensure Bluetooth is turned "On".
3. Klik "Voeg Bluetooth of ander toestel by" en kies "Bluetooth".
4. Stel u Bluetooth -toestel in die paringsmodus.
5. Kies jou toestel uit die lys en volg enige aanwysings op die skerm om die paring te voltooi.

5. Spesifikasies

6. Probleemoplossing

If you encounter issues with your EDUP network card, refer to the following common solutions:

• Geen Wi-Fi of Bluetooth bespeur nie:
  • Ensure the card is securely seated in the PCI-E slot.
  • Verify that the Bluetooth 9-pin USB cable is correctly connected to both the card and the motherboard.
  • Check Device Manager in Windows to see if the Wi-Fi and Bluetooth adapters are recognized and have no error symbols.
  • Reinstall the latest drivers from the Intel or EDUP webwebwerf.
• Poor Wi-Fi signal or slow speeds:
  • Adjust the position of the external antennas for better reception.
  • Maak seker dat jou router Wi-Fi 6 (802.11ax) ondersteun vir optimale werkverrigting.
  • Kyk vir steuring van ander elektroniese toestelle.
  • Dateer jou router se firmware op.
• Bluetooth werk nie:
  • Confirm the Bluetooth 9-pin USB cable is connected. This cable is mandatory for Bluetooth functionality.
  • Maak seker dat Bluetooth in Windows-instellings geaktiveer is.
  • Reinstall the Bluetooth driver.

7. Waarborg en Ondersteuning

EDUP provides a 3-year manufacturer replacement warranty for this product. Additionally, a 90-day no-questions-asked return policy is offered. For any assistance, technical support, or warranty claims, please contact us via Amazon message. We are committed to providing prompt and helpful service.