ElectraStim EM180

ElectraStim Flux Elektrostimulator Gebruikershandleiding

Model: EM180

Inleiding

The ElectraStim Flux is a versatile electro-stimulator designed for a wide range of applications. It features powerful outputs, an intuitive interface, and advanced control options including audio processing. This manual provides comprehensive instructions for the safe and effective use of your Flux device, covering setup, operation, maintenance, and troubleshooting.

Veiligheidsinligting

Always follow the instructions provided in this guide. Keep the device away from water and do not use it while bathing or showering. Do not use the device if you have a pacemaker or any other electronic medical device. Consult a healthcare professional before use if you have any health concerns or are pregnant. Clean the device and accessories after each use with mild soap and warm water, and store them properly to maintain hygiene and prevent damage.

Verklarings rakende dieetaanvullings is nie deur die FDA geëvalueer nie en is nie bedoel om enige siekte of gesondheidstoestand te diagnoseer, te behandel, te genees of te voorkom nie.

Pakketinhoud

Maak asseblief seker dat al die volgende items in u pakket teenwoordig is:

  • ElectraStim Flux Unit
  • Beskermende dratas
  • Elektrodeblokkies (verskeie pare)
  • Electrode Cables (2x)
  • USB-laaikabel
  • Audio Line-In Cable
  • Vinnige Begingids (aparte dokument)
All contents included with the ElectraStim Flux: the unit, carrying case, electrode pads, cables, and charging cable.

Figure 1: ElectraStim Flux complete package contents.

Opstelling

Laai die toestel

The Flux unit is powered by a high-capacity rechargeable lithium-ion battery. Before first use, or when the battery indicator shows low charge, connect the device to a USB power source using the provided USB charging cable.

  • Locate the micro-USB port on the bottom of the Flux unit.
  • Insert the small end of the USB cable into the Flux unit and the larger end into a USB wall adapter or computer USB port.
  • The OLED display will show a battery charging indicator. The device charges to 80% in under an hour.
  • A full charge provides up to 8 hours of play, depending on the selected mode and intensity.
Diagram showing the ElectraStim Flux unit with a battery charging indicator on its screen, highlighting its rechargeable battery feature.

Figure 2: Battery charging display on the Flux unit.

Koppel toebehore

The Flux unit features twin outputs, allowing for a wide variety of accessory configurations. Ensure the device is turned off before connecting or disconnecting accessories.

  • Connect the electrode cables to the two output ports located on the top edge of the Flux unit. These are labeled CH1 and CH2.
  • Attach the electrode pads to the other end of the electrode cables.
  • Maak seker dat alle verbindings veilig is voordat die toestel aangeskakel word.
Top view of the ElectraStim Flux unit, showing the two output ports for connecting electrode cables.

Figuur 3: Bo view showing output ports for electrode cables.

Two electrode cables with 2mm pin connectors for connecting to electrode pads.

Figure 4: Electrode cables for connecting to pads.

Bedryfsinstruksies

Kontroles verbyview

The Flux unit features a clear OLED display and intuitive button controls:

Voorkant view of the ElectraStim Flux Electro-Stimulator showing the OLED display and control buttons.

Figuur 5: Voorkant view of the ElectraStim Flux with controls.

  • Aan/af-knoppie (⑂): Druk en hou om die toestel aan of af te skakel.
  • Modusknoppie (M): Cycles through the available play modes.
  • Channel 1 Intensity (+/-): Adjusts the intensity for Channel 1.
  • Channel 2 Intensity (+/-): Adjusts the intensity for Channel 2.
  • Cycle/Rotate Button (↻): Cycles through pre-programmed patterns within a selected mode or changes orientation in Tilt mode.

Skakel aan/af

To turn on the Flux unit, press and hold the Power button (⑂) until the display illuminates. To turn off, press and hold the Power button again until the display shuts down.

Aanpassing van intensiteit

The Flux offers 99 intensity levels for precise control. Use the Channel 1 (+/-) and Channel 2 (+/-) buttons to increase or decrease the stimulation intensity for each respective channel. The current intensity level will be displayed on the OLED screen.

Selecting Play Modes and Patterns

The Flux comes with 6 distinct play modes and over 40 pre-programmed wave/pulse patterns. Press the Mode (M) button to cycle through the main play modes. Once a mode is selected, use the Cycle/Rotate (↻) button to switch between the available patterns within that mode.

Oudiomodusse

The Flux features advanced audio-processing controls, allowing external audio to influence the stimulation patterns. There are two primary audio modes:

  • Stereo Line-In Mode: Connect an audio source (e.g., smartphone, MP3 player) to the 3.5mm audio jack on the bottom of the Flux unit using the provided audio line-in cable. The device will respond to the music or stereo-stim tracks, creating unique sensations.
  • Mikrofoonmodus: Utilize the built-in microphone to allow ambient noise, including voices or environmental sounds, to control the stimulation.
Diagram showing the ElectraStim Flux unit with an audio mode display, illustrating its ability to respond to music and ambient sounds.

Figure 6: Flux unit displaying audio mode information.

Onderhoud

Skoonmaak

To ensure hygiene and longevity of your device, clean the Flux unit and all accessories after each use. Use a soft cloth dampened with mild soap and warm water. Do not submerge the unit in water. Ensure the device is completely dry before storage or next use.

Berging

Store the ElectraStim Flux and its accessories in the provided protective carrying case when not in use. This protects the device from dust, moisture, and physical damage, ensuring its optimal performance over time.

Black carrying case for the ElectraStim Flux unit with the 'FLUX Φ' logo.

Figure 7: Protective carrying case for the ElectraStim Flux.

Probleemoplossing

If you encounter any issues with your ElectraStim Flux, please refer to the table below for common problems and their solutions.

ProbleemMoontlike oorsaak/oplossing
Device turns off unexpectedly during use.Battery may be low. Recharge the device fully. Ensure electrode cables are securely connected.
Toestel vries of reageer nie meer nie.Try restarting the device by holding the power button. If the issue persists, contact customer support for potential firmware updates.
Limited variation in pre-programmed patterns.Ensure you are cycling through all available patterns within each mode using the Cycle/Rotate button. Experiment with audio input modes for dynamic stimulation.
Geen stimulasie gevoel of swak stimulasie.Check intensity levels for both channels. Ensure electrode pads are properly applied and making good contact. Verify electrode cables are securely connected to both the unit and pads.

Spesifikasies

KenmerkDetail
ModelnommerEM180
Produk afmetings3.94 x 0.79 x 2.76 duim
Gewig10.58 onse
Battery Tipe1 Lithium Ion battery (rechargeable)
Intensiteitsvlakke99
Speel modi6 (including accelerometer and audio control)
Pre-programmed Patterns40+
UitsetteTwin outputs
VervaardigerElectraStim
Datum Eerste Beskikbaar7 Oktober 2019

Waarborg en Ondersteuning

For warranty information, technical support, or any inquiries not covered in this manual, please refer to the official ElectraStim webwebwerf of kontak hul kliëntediens direk. Bewaar u bewys van aankoop vir waarborgeise.

© 2024 ElectraStim. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.