Einhell TE-AG 18/115 Li 18V Cordless Angle Grinder Instruction Manual

1. Inleiding

This manual provides essential information for the safe and effective operation of your Einhell TE-AG 18/115 Li 18V Cordless Angle Grinder. Please read all instructions carefully before use and retain this manual for future reference.

The Einhell TE-AG 18/115 Li is a lightweight and compact cordless angle grinder designed for abrasive cutting and polishing tasks. It features a robust aluminum gearbox, soft-start safeguard, and an ergonomic design for comfortable and precise control. This tool is part of the Einhell Power X-Change family, allowing for battery interchangeability with other compatible tools.

Sleutel kenmerke:

• Power X-Change System: Utilizes the versatile 18-Volt battery system compatible with all Einhell Power X-Change tools.
• Kragtige prestasie: Delivers smooth and consistent operation with up to 8,500 RPM.
• Verbeterde veiligheid: Equipped with soft start and restart protection for user safety, along with overload protection for device longevity.
• Duursame konstruksie: Features aluminum gearing and optimized ventilation for increased service life and improved cooling.
• Ergonomiese hantering: Includes a 3-position easy-connect auxiliary handle for customizable comfort and control.

2. Veiligheidsinligting

Always observe general safety regulations when using power tools. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

Algemene veiligheidswaarskuwings vir kraggereedskap:

• Werksarea veiligheid: Hou die werkarea skoon en goed belig. Oorvol of donker areas nooi ongelukke uit. Moenie elektriese gereedskap in plofbare atmosfere gebruik nie, soos in die teenwoordigheid van vlambare vloeistowwe, gasse of stof.
• Elektriese veiligheid: Vermy liggaamskontak met geaarde oppervlaktes. Moenie elektriese gereedskap aan reën of nat toestande blootstel nie.
• Persoonlike veiligheid: Dra altyd oogbeskerming. Gebruik gehoorbeskerming wanneer u vir lang tye werk. Dra 'n stofmasker as u stof skep. Trek behoorlik aan; vermy los klere of juweliersware.
• Gereedskap gebruik en versorging: Moenie die kraggereedskap forseer nie. Gebruik die korrekte kraggereedskap vir u toepassing. Ontkoppel die batterypak van die kraggereedskap voordat u enige aanpassings maak, bykomstighede verander of kraggereedskap bêre.
• Batterygereedskapgebruik en -versorging: Herlaai slegs met die laaier wat deur die vervaardiger gespesifiseer is. Gebruik slegs elektriese gereedskap met spesifiek aangewese batterypakke.

Specific Safety Warnings for Grinding Operations:

• This power tool is intended to function as a grinder. Read all safety warnings, instructions, illustrations, and specifications provided with this power tool.
• Always use the correct type of grinding disc for the material and application.
• Maak seker dat die skyf stewig gemonteer en vry van skade is voor elke gebruik.
• Never operate the tool without the guard properly installed and adjusted.
• Maintain a firm grip on the tool and position your body to resist kickback forces.

3. Komponente en Onderdele

Familiarize yourself with the various parts of your Einhell TE-AG 18/115 Li angle grinder for safe and efficient operation.

Figuur 1: Einhell TE-AG 18/115 Li Cordless Angle Grinder. This image shows the main body of the angle grinder, highlighting its compact design and the outline of a compatible Power X-Change battery, which is sold separately.

Figuur 2: Kant view of the angle grinder. This image provides a closer look at the auxiliary handle and the disc guard, which are crucial for control and safety during operation.

• Hoofhandvatsel: Ergonomic grip for primary control.
• Hulphandvatsel: Provides additional grip and control, attachable in multiple positions.
• Spilslotknoppie: Word gebruik om die spil te sluit vir skyfveranderings.
• Aan/af skakelaar: Aktiveer en deaktiveer die instrument.
• Skyfbeskermer: Adjustable guard for protection against sparks and debris.
• Grinding Disc/Cutting Disc (not included): The abrasive accessory for material removal.
• Battery Pack (not included): Verskaf krag aan die gereedskap.

4. Opstelling

Before operating the angle grinder, ensure proper assembly and battery installation.

4.1 Bevestig die hulphandvatsel

The auxiliary handle can be attached in three different positions (left, right, or top) to suit your working preference and application.

Figuur 3: Angle grinder demonstrating the three possible positions for attaching the auxiliary handle, allowing for versatile and comfortable use.

1. Screw the auxiliary handle firmly into the desired threaded opening on the gear head.

4.2 Mounting the Disc Guard

The disc guard must always be used for safety and adjusted to direct sparks away from you.

1. Place the disc guard onto the collar of the gear housing.
2. Rotate the guard to the desired position, ensuring it covers the top of the disc and directs sparks away from the operator.
3. Draai die clamping lever to secure the guard in place.

4.3 Installing/Changing Grinding Discs

Always ensure the tool is switched off and the battery is removed before changing discs.

1. Druk en hou die spilslotknoppie in.
2. Use the supplied spanner wrench to loosen and remove the clamping moer.
3. Verwyder die ou skyf en maak die flense skoon.
4. Place the new disc onto the lower flange, ensuring it sits flat.
5. Skroef die cl vasamping nut and tighten it firmly with the spanner wrench while holding the spindle lock button.

4.4 Battery installasie

This tool is sold without a battery or charger. Use only Einhell Power X-Change 18V batteries.

1. Maak seker dat die battery volledig gelaai is.
2. Slide the charged battery pack into the battery receptacle on the tool until it clicks into place.
3. Om te verwyder, druk die battery-ontgrendelingsknoppie en skuif die battery uit.

5. Bedryfsinstruksies

Volg hierdie stappe vir veilige en effektiewe werking van jou hoekslyper.

5.1 Aan- en afskakel

1. Om aan te skakel: Push the On/Off switch forward and then press it down.
2. Om af te skakel: Release the On/Off switch. If the switch is locked in the ON position, press the rear part of the switch to release it.

5.2 Slyp- en snytegnieke

Laat die skyf altyd volle spoed bereik voordat dit die werkstuk raak.

Figuur 4: The angle grinder in operation, illustrating the direction of cutting and the protective function of the disc guard.

• Slyp: Hold the tool at an angle of approximately 15-30 degrees to the workpiece. Apply moderate pressure and move the tool evenly across the surface.
• Sny: Hold the tool at a 90-degree angle to the workpiece. Apply light, even pressure. Do not tilt the cutting disc, as this can cause it to jam or break.
• Maak seker dat die werkstuk veilig is clamped om beweging te voorkom.
• Avoid overloading the tool. If the tool slows down significantly, reduce pressure.

6. Onderhoud

Regular maintenance ensures the longevity and optimal performance of your angle grinder.

6.1 Skoonmaak

1. Verwyder altyd die batterypak voordat dit skoongemaak word.
2. Keep the ventilation slots clean to prevent overheating. Use a soft brush or compressed air to clear dust and debris.
3. Vee die gereedskapbehuising met advertensie afamp lap. Moenie harde skoonmaakmiddels of oplosmiddels gebruik nie.

6.2 Disc Replacement

Refer to section 4.3 for detailed instructions on changing grinding discs.

6.3 Berging

1. Bêre die gereedskap op 'n droë, veilige plek buite die bereik van kinders.
2. Verwyder die batterypak uit die gereedskap voor berging.

7. Probleemoplossing

Hierdie afdeling bespreek algemene probleme wat jy met jou hoekslyper kan teëkom.

• Gereedskap begin nie:
  • Check if the battery pack is properly inserted and charged.
  • Ensure the On/Off switch is fully engaged.
  • The tool may be in restart protection mode; release the switch and try again.
• Reduced power or overheating:
  • Die battery is dalk laag; laai dit weer op.
  • Clean the ventilation slots to ensure proper airflow.
  • Reduce pressure on the workpiece to avoid overloading.
• Oormatige vibrasie:
  • Check if the grinding disc is correctly mounted and tightened.
  • Inspect the disc for damage or imbalance; replace if necessary.

8. Spesifikasies

9. Einhell Power X-Change Ecosystem

The Einhell TE-AG 18/115 Li is part of the innovative Power X-Change battery system. This means that any 18V Power X-Change battery can be used with this angle grinder, as well as with over 200 other tools and garden equipment in the Einhell range.

Figuur 5: The Einhell Power X-Change battery at the center, surrounded by a wide array of compatible tools, illustrating the versatility of the battery system.

10. Waarborg en Ondersteuning

Einhell products are manufactured to high-quality standards and undergo strict quality controls. In the unlikely event of a problem, please contact your retailer or the Einhell customer service department. Keep your purchase receipt as proof of purchase for warranty claims.

For detailed warranty terms and conditions, or to find contact information for customer support, please refer to the official Einhell website or the documentation included with your product packaging.