Suuwer S701 Non-Programmable Thermostat User Manual

1. Inleiding

This manual provides detailed instructions for the installation, operation, and maintenance of your Suuwer S701 Non-Programmable Thermostat. This thermostat is designed for use with 1 Heat/1 Cool conventional single-stage heating and cooling systems. Please read this manual thoroughly before installation and operation to ensure proper function and safety.

Beeld 1.1: Voorkant view of the Suuwer S701 Non-Programmable Thermostat, displaying room temperature and set temperature on a blue backlit screen.

2. Veiligheidsinligting

• Skakel altyd die krag na die verhittings-/verkoelingstelsel by die hoofsekering of stroombrekerpaneel af voordat u die termostaat installeer of onderhou.
• This thermostat operates on 24VAC power or 2 AAA batteries. Do not connect to line voltage (120-240V) systems.
• If you are inexperienced with electrical wiring, it is recommended to seek professional assistance for installation.
• Ensure all wiring connections are secure to prevent short circuits or damage to the system.

3. Pakketinhoud

Verifieer dat alle items in jou pakket teenwoordig is:

• Suuwer S701 Thermostat Unit
• Installasie handleiding
• Kabeletikette
• Monteer skroewe (2)
• Muurankers (2)

Image 3.1: Illustration of the Suuwer S701 thermostat and its included accessories.

4. Stelselversoenbaarheid

The Suuwer S701 thermostat is designed for specific HVAC systems. Please review the compatibility information carefully before installation.

4.1 Compatible Systems

• Konvensionele enkel-Stage Heating & Cooling (with C-wire or without C-wire)
• Gas Fireplace (24 Volts)
• Gas / Oil / Electric Furnace (Heating only)
• Slegs ketelstralingsverhitting
• Slegs oond met gedwonge lugverhitting
• Cooling Only (with C-wire or without C-wire)

Let wel: Verify your existing thermostat base is wired with 2 to 5 wires. Systems with 6 to 8 wires are generally not supported by this model.

4.2 Incompatible Systems

• Multistage Heating & Cooling (e.g., 1H/2C, 2H/2C)
• HVAC Heat Pump Systems (e.g., 2H/1C, 4H/2C)
• PTACs (Packaged Terminal Air Conditioners)
• 3-wire Hydronic (Hot Water) Systems
• Dual Fuel/Hybrid Heating Systems
• Lyn Voltage Systems (120-240V electric baseboards heat)
• Mini Split Heat Pump Air Conditioners
• RV Air Conditioners (Mach and Roughneck series)
• Konvektore
• Radiant Ceiling Heat

Image 4.1: Detailed compatibility chart for the Suuwer S701 thermostat.

5. Opstelling en installering

Follow these steps for proper installation. It is recommended to take a picture of your old thermostat's wiring before disconnecting any wires.

5.1 Removing Your Old Thermostat

1. Skakel krag af: Vind die stroombreker of sekeringskas wat jou verhittings- en verkoelingstelsel beheer en skakel die krag af.
2. Verwyder deksel: Carefully remove the cover of your old thermostat.
3. Photograph wiring: Take a clear picture of the wiring connections, noting which wire is connected to each terminal.
4. Label wires: Use the provided cable labels to mark each wire according to its terminal designation (e.g., R, W, Y, G, C).
5. Disconnect wires: Ontkoppel die drade van die ou termostaatterminale.
6. Remove old base: Unscrew and remove the old thermostat's mounting base from the wall.

5.2 Mounting the New Thermostat

1. Position base: Hold the new Suuwer S701 thermostat base against the wall where you want to mount it.
2. Mark screw holes: Mark the positions for the mounting screws. If possible, use existing screw holes.
3. Boor gate: If new holes are needed, drill pilot holes and insert the wall anchors.
4. Veilige basis: Pull the wires through the opening in the thermostat base and secure the base to the wall using the provided screws.

5.3 Bedradingsverbindings

Connect the labeled wires to the corresponding terminals on the Suuwer S701 thermostat base. Refer to the wiring diagram below and your photograph for accuracy.

• R/RC: 24VAC power (often jumpered, see diagram)
• G: Binneblaaier (waaier)
• Y: 1ste-stage koel
• W: 1ste-stage hitte
• C: Common wire (optional for battery-powered operation, but recommended for continuous backlight)

Image 5.1: Wiring diagram and system switch setting for the Suuwer S701 thermostat.

5.4 Setting the System Switch (GAS/ELEC)

On the back of the thermostat unit, locate the small switch labeled 'GAS' and 'ELEC'.

• As jy 'n gas or oil furnace, stel die skakelaar op GAS.
• As jy 'n electric furnace, stel die skakelaar op ELEC.

5.5 Installeer batterye

The thermostat can be powered by 24VAC or 2 AAA batteries. Batteries are required for operation if no C-wire is connected. Even with a C-wire, batteries provide backup power.

1. Open the battery compartment on the front of the thermostat.
2. Plaas twee nuwe AAA alkaliese batterye in en maak seker dat die polariteit (+/-) korrek is.
3. Maak die batterykompartement toe.

5.6 Attaching the Thermostat to the Base

Align the thermostat unit with the mounted base and gently push it into place until it clicks securely.

5.7 Restoring Power

Once the thermostat is securely mounted and wired, turn the power back on at the main circuit breaker or fuse box.

6. Bedryfsinstruksies

The Suuwer S701 is a non-programmable thermostat, offering straightforward manual control of your home's temperature.

Image 6.1: Display and controls of the Suuwer S701 thermostat.

6.1 Vertoon oorview

The large LCD with blue backlight shows the current room temperature and the set temperature. The backlight activates for 10 seconds when any button is pressed.

• Kamer: Displays the current ambient temperature.
• Stel op: Displays the desired temperature setting.
• Cool/Heat/Off: Indicates the current system mode.
• Fan ON/AUTO: Dui die huidige waaiermodus aan.

6.2 Aanpassing van temperatuur

Gebruik die + (Op) en - (Down) buttons on the right side of the thermostat to adjust the desired temperature setting. Each press changes the temperature by 1 degree Fahrenheit.

6.3 Stelselmoduskeuse

Gebruik die STELSEL switch located at the bottom right of the thermostat to select the operating mode:

• KOEL: Activates the cooling system when the room temperature rises above the set temperature.
• HITTE: Activates the heating system when the room temperature falls below the set temperature.
• AF: Skakel beide verhittings- en verkoelingstelsels af.

6.4 Keuse van waaiermodus

Gebruik die FAN switch located at the bottom left of the thermostat to select the fan operating mode:

• VOERTUIG: The fan runs only when the heating or cooling system is actively operating. This is the most common and energy-efficient setting.
• OP: Die waaier loop aanhoudend, ongeag of die verhittings- of verkoelingstelsel aktief is.

6.5 Adjusting Temperature Swing (Cycle Rate)

The temperature swing, also known as cycle rate or differential, determines how much the temperature can vary from your setpoint before the system turns on. A smaller swing results in more frequent, shorter cycles, while a larger swing results in less frequent, longer cycles.

The swing is adjustable from 0.2°F to 2°F. The factory default is 0.5°F for both heating and cooling.

Image 6.2: Thermostat display showing the temperature swing setting.

To adjust the temperature swing:

1. Druk en hou die FAN button for approximately 3 seconds until the display changes to show the current swing setting.
2. Gebruik die + (Op) of - (Down) buttons to adjust the swing value.
3. Druk die FAN button again to toggle between heating and cooling swing settings.
4. The thermostat will automatically save the setting after a few seconds of inactivity.

7. Onderhoud

7.1 Batteryvervanging

When the low battery indicator (a battery icon) appears on the display, it is time to replace the batteries. Replace with two new AAA alkaline batteries. Refer to Section 5.5 for battery installation steps.

7.2 Skoonmaak

Vee die buitekant van die termostaat af met 'n sagte, damp lap. Moenie skuur skoonmaakmiddels of oplosmiddels gebruik nie.

8. Probleemoplossing

As jy probleme met jou termostaat ondervind, raadpleeg die volgende algemene probleme en oplossings:

Vir meer gedetailleerde probleemoplossing, verwys asseblief na die Probleemoplossingsgids (PDF).

9. Spesifikasies

• Model: S701
• Produk afmetings: 0.98" D x 4.72" B x 3.86" H
• Item gewig: 6.7 onse (0.42 pond)
• Kleur: Blou Agterlig
• Materiaal: Plastiek
• Vertoon tipe: LCD met blou agtergrond
• Skermgrootte: 4.5 duim
• Beheer tipe: Push Button / Button Control
• Montage tipe: Muurmontering
• Kragbron: 24 Volts (AC) or 2 AAA Batteries
• Temperatuurbeheer reeks: 44°F tot 90°F
• Room Temperature Display Range: 41°F tot 95°F
• Temperatuur Akkuraatheid: +/-1°F
• Spesiale kenmerke: Non-Programmable, Separate Heating and Cooling Swing (0.2°F to 2°F), Low Battery Indicator, 5 Minute Compressor Delay Protection (Selectable ON or OFF)
• UPC: 709327753278

10. Waarborg en Ondersteuning

10.1 Waarborginligting

The Suuwer S701 Non-Programmable Thermostat comes with a 2 jaar sorgvrye waarborg vanaf die aankoopdatum. Hierdie waarborg dek defekte in materiaal en vakmanskap onder normale gebruik. Bewaar asseblief u bewys van aankoop vir waarborgeise.

10.2 Kliëntediens

For technical assistance, troubleshooting, or warranty inquiries, please contact Suuwer customer service. We offer 24-hour customer service to assist you.

Bykomende hulpbronne:

• Laai die volledige installasiehandleiding af (PDF)
• Laai die probleemoplossingsgids af (PDF)