Inleiding
Dankie vir die aankoopasing the YISSVIC Digital Alarm Clock. This manual provides detailed instructions for setting up, operating, and maintaining your new alarm clock. Please read it carefully to ensure optimal performance and longevity of the product.
Produk Kenmerke
- Large 6.3-inch LED display for clear visibility.
- Dual alarm settings for different wake-up times.
- Six adjustable brightness levels to suit various environments.
- Two distinct alarm sounds.
- 9-minuut snooze-funksie.
- 12/24 hour time format options.
- Slanke en moderne ontwerp.
Image: YISSVIC Digital Alarm Clock showing its dimensions (6.3 inches wide, 1.9 inches deep, 2.2 inches high) and key features including 2 alarms, 9-minute snooze, digital full screen, 2 alarm sounds, adjustable brightness, and 12/24 time format.
Opstelling
- Uitpak: Verwyder die wekker versigtig uit die verpakking. Maak seker dat alle komponente teenwoordig is: die wekkereenheid en die kragadapter.
- Kragverbinding: Connect the power adapter to the DC input port on the back of the alarm clock. Plug the adapter into a standard electrical outlet. The display will light up.
- Aanvanklike tydinstelling: Upon first power-up, the clock display may show a default time or flash. Refer to the "Setting Time" section under "Operating Instructions" to set the correct time.
Bedryfsinstruksies
Stel tyd
- Druk en hou die TYD BEREIK button (usually located on the top or back) until the hour digits begin to flash.
- Gebruik die UUR en MINUUT buttons to adjust the time. Pressing and holding these buttons will allow for faster adjustment.
- Druk TYD BEREIK again to confirm the time and move to the 12/24 hour format setting.
- Gebruik die 12/24H button to select your preferred time format.
- Druk TYD BEREIK one last time to exit time setting mode.
Alarms instel (Alarm 1 en Alarm 2)
- Druk en hou die ALARM 1 STEL knoppie totdat die alarmuursyfers flikker.
- Gebruik die UUR en MINUUT knoppies om die verlangde alarmtyd vir Alarm 1 in te stel.
- Druk ALARM 1 STEL again to confirm the time and move to alarm sound selection.
- Gebruik die ALARMGELUID button to cycle through the available alarm sounds.
- Druk ALARM 1 STEL to exit Alarm 1 setting mode.
- Herhaal die proses vir ALARM 2 STEL if a second alarm is desired.
Image: YISSVIC Digital Alarm Clock illustrating the two alarm sounds (original beep and chords) and two adjustable volume levels (65db and 75db).
Aktivering/Deaktivering van alarms
- Druk die ALARM 1 AAN/UIT button to toggle Alarm 1 on or off. An alarm icon will appear/disappear on the display.
- Druk die ALARM 2 AAN/UIT button to toggle Alarm 2 on or off.
Sluimer funksie
- Wanneer 'n alarm afgaan, druk die groot knoppie SLUIMER button (usually on top) to temporarily silence the alarm for 9 minutes. The alarm will sound again after 9 minutes.
- To cancel the snooze and turn off the alarm completely until the next set time, press any other button on the clock.
Image: YISSVIC Digital Alarm Clock with a hand pressing the large snooze button, indicating a 9-minute snooze function.
Verstel skermhelderheid
- Druk die DOWWER or HELDERHEID button (refer to button labels on your device) to cycle through the 6 available brightness levels.
- Kies die helderheidsvlak wat die gemaklikste is vir jou omgewing.
Image: YISSVIC Digital Alarm Clock demonstrating 6 levels of brightness, from Level 1 (darkest) to Level 5 (brightest), and an off state, ensuring visual comfort.
Onderhoud
- Skoonmaak: Use a soft, dry cloth to wipe the surface of the alarm clock. Avoid using abrasive cleaners or solvents, as they may damage the finish.
- Krag: Ensure the clock is always connected to a stable power source. In case of power outage, the clock may lose time settings if not equipped with a backup battery (check specifications).
- Plasing: Place the alarm clock on a stable, flat surface away from direct sunlight, excessive heat, or moisture.
Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Die klokskerm is leeg. | No power or power adapter is loose. | Check power connection. Ensure the adapter is securely plugged into the clock and the wall outlet. |
| Die alarm lui nie. | Die alarm is nie geaktiveer nie of die volume is te laag. | Ensure the alarm icon is displayed. Adjust alarm volume if applicable. |
| Tyd is verkeerd. | Time was not set correctly or power interruption occurred. | Re-set the time following the "Setting Time" instructions. |
| Die skerm is te helder/dowwe. | Brightness level needs adjustment. | Press the DIMMER/BRIGHTNESS button to cycle through levels. |
Spesifikasies
- Handelsmerk: YISSVIC
- Model: B07WHP96G2
- Vertoon tipe: Digitale LED
- Vertoongrootte: Ongeveer 6.3 duim
- Kragbron: Elektries met koord
- Raammateriaal: Akriel-nitril-butadiëne-stireen
- Alarm funksie: Dual alarms, 2 sounds, 9-minute snooze
- Helderheid: 6 verstelbare vlakke
- Tydformaat: 12/24 uur kiesbaar
Waarborg en Ondersteuning
YISSVIC products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official YISSVIC webwebwerf. Bewaar u aankoopbewys as bewys van aankoop vir waarborgeise.
For further assistance, please contact YISSVIC customer service via their official webwebwerf: www.yissvic.com