Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

1. Inleiding

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. Veiligheidsinligting

• Lees alle instruksies sorgvuldig voor installasie en gebruik.
• Moenie die sensor aan direkte sonlig, uiterste temperature of hoë humiditeit blootstel nie.
• Ensure the device is installed in a stable location to prevent accidental falls.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• Hou die toestel buite bereik van kinders.

3. Pakketinhoud

Verifieer dat alle items in die pakket teenwoordig is:

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1x Bevestigingsbeugel
• 1x Set of Screws and Wall Plugs
• 1x Battery (Alkaline)
• 1x Quick Start Guide (this manual)

4. Produk verbyview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

Figuur 1: Voorkant view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

Sleutelkomponente:

• PIR Lens: Detects infrared radiation from moving bodies.
• LED-aanwyser: Provides status feedback (e.g., detection, low battery).
• Battery kompartement: Huisves die kragbron.
• Monteerpunte: For secure installation on a wall.
• Tamper Skakelaar: Triggers an alarm if the sensor cover is opened.

5. Opstelling

5.1. Battery Installasie

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. Montering van die sensor

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. Gebruik die monteerbeugel as 'n sjabloon om die skroefposisies op die muur te merk.
3. Boor gate op die gemerkte posisies en plaas die muurproppe.
4. Bevestig die monteerbeugel aan die muur met die meegeleverde skroewe.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. Bediening van die sensor

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. LED-aanwyserstatus

• Brief Flash: Indicates motion detection.
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• Geen lig: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.

7. Onderhoud

7.1. Skoonmaak

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. Battery vervanging

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. Gereelde tjeks

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8. Probleemoplossing

9. Spesifikasies

• Handelsmerk: Intelbras
• Model: IVP2000SF
• Kragbron: Battery aangedrewe
• Battery tipe: Alkalies
• Montage tipe: Muurmontering
• Versoenbare toestelle: Intelbras security systems and smart home hubs
• Produk afmetings: Ongeveer 17 x 10 x 9 cm (6.7 x 3.9 x 3.5 duim)
• Opsporingsmetode: Passiewe infrarooi (PIR)
• Bespeuringsreeks: Tot 12 meter (39 voet)
• Bespeuringshoek: Ongeveer 90 grade
• Bedryfsomgewing: Slegs binnenshuise gebruik

10. Waarborginligting

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webwebwerf of kontak hul kliëntediens. Bewaar u bewys van aankoop vir waarborgeise.

11. Ondersteuning

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• Webwebwerf: Besoek die amptelike Intelbras webwebwerf vir ondersteuningsbronne, algemene vrae en kontakbesonderhede.
• Telefoon: Refer to the contact section on the Intelbras webwebwerf vir plaaslike ondersteuningsnommers.