Ruckus R720

Ruckus R720 802.11ac Wireless Indoor Access Point User Manual

Model: R720 (901-R720-US00)

1. Inleiding

This manual provides detailed instructions for the installation, configuration, operation, and maintenance of the Ruckus R720 802.11ac Wireless Indoor Access Point. Please read this manual thoroughly before using the device to ensure proper and safe operation.

The Ruckus R720 is a high-performance 802.11ac Wave 2 Wi-Fi access point designed for high-density environments, offering multi-gigabit access speeds and advanced features for optimal wireless connectivity.

2. Veiligheidsinligting

Neem altyd die volgende veiligheidsmaatreëls in ag:

  • Ensure the device is installed in a well-ventilated area.
  • Use only the specified power adapter (12V DC) or Power over Ethernet (PoE) source (802.3af/at/bt).
  • Moenie die toestel aan water of oormatige humiditeit blootstel nie.
  • Moenie probeer om die toestel self oop te maak of te herstel nie. Verwys alle diens na gekwalifiseerde personeel.
  • Hou die toestel weg van hittebronne en direkte sonlig.

3. Produk verbyview

The Ruckus R720 is an 802.11ac Wave 2 wireless access point featuring concurrent dual-band radios (2.4GHz / 5GHz) and four MU-MIMO spatial streams. It is designed to provide high-performance wireless networking, supporting multiple clients and devices.

3.1 Sleutelkenmerke

  • Four MU-MIMO spatial streams, concurrent dual-band radios (2.4GHz / 5GHz)
  • Support for legacy clients, 802.11ac Wave 2 access point with 2.5Gbps
  • Mitigate interference and extend coverage with patented BeamFlex+
  • Improve performance automatically with ChannelFly, RF Dynamic Channel Selection
  • 802.3af/at/bt Power over Ethernet (PoE) support
  • Integrated key holes for wall or ceiling mount (adjustable acoustic drop ceiling bracket included)
  • Two Ethernet ports: One 2.5GbE with 802.3af/at/bt (PoE, PoE+, PoH, UPoE) and one 1GbE
  • USB port for radio modules

3.2 Pakketinhoud

The Ruckus R720 package includes:

  • Ruckus R720 Access Point
  • Montageset

Note: A 12V DC Adapter and a controller are sold separately and may be required for certain deployments.

3.3 Physical Description and Interfaces

Voorkant view of the Ruckus R720 Access Point showing LED indicators for 5G, 2.4G, AIR, CTL, and PWR.
Figuur 1: Voorkant view of the Ruckus R720 Access Point with LED indicators.

This image displays the front of the Ruckus R720 Access Point. Visible are five LED indicators labeled '5G', '2.4G', 'AIR', 'CTL', and 'PWR', providing status information for the device's operation, including 5GHz and 2.4GHz band activity, air interface, control status, and power.

Agter view of the Ruckus R720 Access Point showing ports and mounting points.
Figuur 2: Agter view of the Ruckus R720 Access Point with labeled ports and mounting features.

This image shows the rear panel of the Ruckus R720 Access Point. Key features highlighted include integrated key holes for wall or ceiling mounting, a pad-lock security latch, a Kensington Lock Eye, a Power Connector, a USB port for radio modules, and two Ethernet ports (one 2.5GbE with PoE support and one 1GbE).

4. Opstelling en installering

Before beginning installation, ensure you have all necessary components and tools. The Ruckus R720 can be mounted on a wall or ceiling using the included mounting kit.

4.1 Montering van die toegangspunt

The R720 comes with an integrated mounting kit suitable for various surfaces. Follow these general steps:

  1. Kies 'n ligging: Kies 'n sentrale ligging vir optimale Wi-Fi-dekking, weg van obstruksies en bronne van steuring.
  2. Bevestig die hakie: Use the mounting bracket and appropriate screws to secure the access point to a wall or ceiling. Ensure it is firmly attached.
  3. Attach the AP: Align the R720 with the mounted bracket and slide it into place until it clicks securely.

4.2 Powering the Access Point

The Ruckus R720 supports Power over Ethernet (PoE) or an external 12V DC power adapter.

  • PoE-verbinding: Connect an Ethernet cable from a PoE-enabled switch or injector (802.3af/at/bt compliant) to the 2.5GbE Ethernet port on the R720. This will provide both power and data connectivity.
  • GS-kragverbinding: If not using PoE, connect a 12V DC power adapter (sold separately) to the power connector on the rear of the device.

4.3 Netwerkverbinding

Connect the R720 to your network infrastructure:

  • Connect an Ethernet cable from your network switch or router to either the 2.5GbE or 1GbE Ethernet port on the R720. The 2.5GbE port supports higher speeds and PoE.

5. Bediening van die toegangspunt

Once powered on and connected to the network, the Ruckus R720 will begin its boot sequence. The LED indicators on the front panel provide status information.

5.1 LED-aanwyserstatus

LEDKleur / StaatBeskrywing
PWRVaste groenDie toestel is aangeskakel en werk normaalweg.
PWRAfGeen krag nie.
2.4G / 5GVaste groenRadio is enabled and transmitting.
2.4G / 5GKnipperende GroenRadio is active with data traffic.
LUGKnipperende GroenWireless activity detected.
SOLVaste groenConnected to a controller (if applicable).

5.2 Configuration (Advanced)

For advanced configuration, such as setting up SSIDs, security protocols, and network parameters, the Ruckus R720 can be managed in two primary modes:

  • Selfstandige modus: The AP operates independently. Configuration is typically done via a web-based interface by connecting directly to the AP or through its assigned IP address on the network.
  • Controller-Managed Mode: For deployments with multiple access points, a Ruckus ZoneDirector or SmartZone controller (sold separately) is highly recommended. The controller provides centralized management, configuration, and monitoring of all connected APs. Controller-specific features like Smart Mesh networking are only available in this mode.

Refer to the Ruckus documentation for your specific controller model or the standalone AP firmware for detailed configuration instructions.

6. Onderhoud

Regular maintenance helps ensure the longevity and optimal performance of your Ruckus R720 Access Point.

  • Skoonmaak: Vee die buitekant van die toestel liggies af met 'n sagte, droë lap. Moenie vloeibare skoonmaakmiddels of aërosols gebruik nie.
  • Firmware -opdaterings: Periodically check the Ruckus support webwebwerf vir firmware-opdaterings. Deur die firmware op datum te hou, verseker jy dat jy die nuutste kenmerke, sekuriteitsopdaterings en prestasieverbeterings het.
  • Omgewingskontrole: Ensure the installation environment remains within recommended temperature and humidity ranges. Verify that ventilation openings are not blocked.

7. Probleemoplossing

This section provides solutions to common issues you might encounter with your Ruckus R720 Access Point.

7.1 Algemene kwessies en oplossings

No Power (PWR LED Off)

Moontlike oorsaak: Power adapter or PoE connection issue.

Oplossing:

  • Verify the power adapter is securely connected to the AP and a working power outlet.
  • If using PoE, ensure the Ethernet cable is properly connected to a PoE-enabled switch/injector and that the switch/injector is powered on and functioning correctly.
  • Check the Ethernet cable for damage.

Geen draadlose konneksie nie

Moontlike oorsaak: Radio disabled, incorrect configuration, or interference.

Oplossing:

  • Check the 2.4G and 5G LEDs. If off, the radios might be disabled in the configuration.
  • Access the AP's management interface (standalone mode) or controller to verify SSID broadcast, security settings, and channel selection.
  • Ensure there are no strong sources of interference nearby (e.g., microwaves, cordless phones).
  • Herbegin die toegangspunt.

Stadige prestasie

Moontlike oorsaak: Network congestion, interference, or outdated firmware.

Oplossing:

  • Check for firmware updates and apply them if available.
  • Utilize ChannelFly or manually select less congested Wi-Fi channels.
  • Ensure your wired network connection to the AP is stable and performing optimally.
  • Consider the number of connected devices and their bandwidth usage.

8. Spesifikasies

KenmerkDetail
ModelR720 (901-R720-US00)
Draadloos standaard802.11ac Golf 2
FrekwensiebandDubbelband (2.4 GHz, 5 GHz)
Ruimtelike stromeFour MU-MIMO
Ethernet-poorte1 x 2.5GbE (PoE), 1 x 1GbE
Krag Invoer802.3af/at/bt PoE or 12V DC
Afmetings (L x B x H)9.9 x 8.8 x 3.7 duim
Gewig4 pond
MonteringWall/Ceiling (Mounting Kit Included)
Spesiale kenmerkLED aanwyser

9. Waarborg en Ondersteuning

This product is offered as an Amazon Renewed item. Amazon Renewed products are professionally inspected and tested to work and look like new. They are eligible for replacement or refund under the Amazon Renewed Guarantee if you are not satisfied with your purchase.

For specific support related to the Ruckus R720, including firmware downloads and advanced technical documentation, please visit the official Ruckus support webwebwerf of kontak hul tegniese ondersteuningspan.

For inquiries regarding your Amazon Renewed purchase, please contact Amazon customer service or the seller directly.

© 2024 Ruckus Wireless. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.