Beta 1972/18 Impact Driver User Manual

1. Produk verbyview

The Beta 1972/18 is an ultra-compact 18V brushless impact driver designed for professional use. It features a digital motor for enhanced performance, offering more power, reduced consumption, and precise power dosage.

• Borsellose digitale motor: Provides increased power and efficiency.
• Hoë wringkrag: Up to 75 Nm for demanding applications.
• Veranderlike spoed: Up to 2100 RPM for versatile drilling and driving.
• LED Front Lighting: Verlig die werkarea vir verbeterde sigbaarheid.
• Batterybeskerming: Triple battery self-protection against overload and cell power differences.

Figure 1.1: The Beta 1972/18 Impact Driver, showcasing sy kompakte ontwerp en ergonomiese handvatsel.

2. Ingesluit komponente

Your Beta 1972/18 Impact Driver package includes the following items:

• Beta 1972/18 Impact Driver
• 2 x 5Ah Litium-ioon batterye
• Quick Charger (80 minutes charging time)
• Hard Case for storage and transport
• Belt Clip (right/left mountable)

Figure 2.1: All components of the Beta 1972/18 kit neatly organized within the durable hard case.

3. Opstelling en samestelling

3.1 Laai die battery

1. Connect the quick charger to a suitable power outlet.
2. Slide the 5Ah Lithium-Ion battery onto the charger until it clicks into place.
3. Allow approximately 80 minutes for a full charge. The charger will indicate when charging is complete.
4. Sodra dit gelaai is, verwyder die battery uit die laaier.

3.2 Die installering van die battery

• Align the charged battery with the base of the impact driver.
• Slide the battery firmly into the tool until it locks securely.
• To remove, press the battery release buttons on the sides and slide the battery out.

3.3 Bevestiging van die gordelklem

The belt clip can be attached to either the right or left side of the tool for convenient carrying.

1. Locate the screw hole on the side of the tool where you wish to attach the clip.
2. Align the belt clip with the hole and secure it with the provided screw.

4. Bedryfsinstruksies

4.1 Aan-/afskakeling en spoedbeheer

• To power on the tool, press the trigger switch. The LED front light will illuminate.
• Om af te skakel, laat die snellerskakelaar los.
• The tool features a variable speed trigger. Pressing the trigger further increases the speed up to 2100 RPM.
• Use the speed selector switch (if present, typically near the chuck) to choose between two speed ranges for different applications.

4.2 Wringkragverstelling

The torque collar allows you to adjust the amount of torque applied, preventing overtightening or stripping screws. Rotate the collar to select the desired torque setting, up to 75 Nm.

4.3 Boor en Dryf

1. Insert the appropriate drill bit or driver bit into the chuck. Tighten the chuck securely.
2. Kies die verlangde spoed- en wringkraginstelling.
3. Plaas die gereedskap stewig teen die werkstuk.
4. Press the trigger to begin drilling or driving. Apply steady, even pressure.
5. For drilling into steel, the maximum recommended diameter is 13 mm. For wood, it is 45 mm.

Figure 4.1: Demonstrating the Beta 1972/18 in action, drilling into a wooden surface.

Figure 4.2: The compact design allows for use in confined spaces, such as under a car hood.

5. Onderhoud

5.1 Skoonmaak

• Ontkoppel altyd die battery voor skoonmaak.
• Vee die gereedskap af met 'n skoon, damp lap. Moenie harde chemikalieë of skuur skoonmaakmiddels gebruik nie.
• Hou ventilasie-openinge vry van stof en puin. Gebruik saamgeperste lug indien nodig.

5.2 Batteryversorging en -berging

• Berg batterye in 'n koel, droë plek weg van direkte sonlig en uiterste temperature.
• Vir langtermynberging, laai batterye tot ongeveer 50% kapasiteit.
• Do not store batteries in a discharged state to prevent damage.

5.3 Algemene instandhouding

• Regularly inspect the chuck for wear and tear.
• Kontroleer die kragkabel van die laaier vir enige skade.
• Maak seker dat alle skroewe en bevestigingsmiddels op die gereedskap styf vas is.

6. Probleemoplossing

7. Spesifikasies

8. Waarborg en Ondersteuning

The Beta 1972/18 Impact Driver comes with a 3-jaar waarborg, wat gemoedsrus verseker rakende die kwaliteit en prestasie daarvan.

Beta Tools is a leading company in Italy for the design and production of professional work tools. They maintain a strong presence with three production facilities in Italy, demonstrating their commitment to quality and customer satisfaction.

For technical assistance, warranty claims, or any product-related inquiries, please refer to the contact information provided in your product packaging or visit the official Beta Tools webwebwerf. Bewaar u aankoopbewys as bewys van aankoop vir waarborgdoeleindes.

Vir meer inligting kan u die Beta Brand Page on Amazon.