Hicon Ice Maker with LED Display and 2-in-1 Water Dispenser

Inleiding

Thank you for choosing the Hicon Ice Maker with 2-in-1 Water Dispenser. This appliance is designed to provide convenient access to ice and cold water. Please read this manual thoroughly before operating the unit to ensure safe and efficient use. Keep this manual for future reference.

Veiligheidsinstruksies

• Maak seker dat die toestel op 'n stabiele, gelyk oppervlak geplaas word, weg van direkte sonlig en hittebronne.
• Moenie die toestel, kragkabel of prop in water of ander vloeistowwe dompel nie.
• Hou kinders weg van die toestel tydens gebruik.
• Gebruik slegs drinkbare water in die ysmaker.
• Ontkoppel die toestel voor skoonmaak of wanneer dit vir lang tye nie gebruik word nie.
• Moenie die toestel met 'n beskadigde koord of prop gebruik nie. Kontak gekwalifiseerde dienspersoneel vir herstelwerk.
• Ensure proper ventilation around the unit. Maintain at least 10 cm of space around the sides and back.

Produk verbyview

Familiarize yourself with the components of your Hicon Ice Maker.

Figuur 1: Uitleg van die beheerpaneel
This image displays the control panel with buttons for power, ice size selection (Small, Medium, Large), and water dispensing. Indicator lights show when the ice basket is full, water is needed, or the unit is powered on.

Figure 2: Bullet-Shaped Ice Production
The ice maker produces popular bullet-shaped ice cubes, shown here with a water bottle installed on top for automatic water supply.

Opstelling

Uitpak en plasing

1. Verwyder alle verpakkingsmateriaal en inspekteer die eenheid vir enige skade.
2. Place the ice maker on a firm, level surface. Ensure there is adequate ventilation around the unit (at least 10 cm clearance on all sides).
3. Allow the unit to stand upright for at least 2-4 hours before plugging it in, especially if it was transported horizontally. This allows the refrigerant to settle.

Water byvoeg

The Hicon Ice Maker offers two methods for water supply:

Figure 3: Water Filling Methods
The left side shows automatic water addition using a 5-gallon bottle. The right side shows manual water addition by pouring water into the reservoir.

1. Automatic Water Supply (using a water bottle): Place a standard 2, 3, or 5-gallon water bottle onto the top dispenser opening. Ensure the bottle is securely seated.
2. Handmatige watertoevoer: Open the top lid and pour potable water directly into the water reservoir until it reaches the maximum fill line. Do not overfill.

Let wel: The melted ice water is recycled back into the reservoir for subsequent ice production cycles.

Bedryfsinstruksies

1. Krag aan: Plug the appliance into a grounded electrical outlet. Press the AAN/AF button on the control panel to start the unit.
2. Kies Ysgrootte: Druk die ICE CUBE SIZE SELECTION button repeatedly to cycle through the available ice sizes: Small (S), Medium (M), and Large (L). The corresponding indicator light will illuminate.
3. Ysproduksie: The unit will begin the ice-making cycle. The first batch of ice may take 6-10 minutes. Subsequent batches will be produced continuously.
4. Ys vol aanwyser: Wanneer die ysmandjie vol is, die YS VOL indicator light will illuminate, and the machine will pause ice production. Remove ice to resume operation.
5. Water Shortage aanwyser: As die waterreservoir laag is, die WATER SHORTAGE indicator light will illuminate. Add more water using either the automatic or manual method.
6. Dispense Cold Water: To dispense cold water, place a glass under the cold water tap and press the WATER button. The water nozzle can be extended and retracted.
7. Skakel af: Druk die AAN/AF knoppie om die toestel af te skakel.

Let wel: The ice produced can remain in the basket for approximately 1-2 hours if the machine is turned off, but it is not a freezer and ice will eventually melt.

Onderhoud

Skoonmaak

1. Voor skoonmaak: Always unplug the ice maker from the power outlet.
2. Binne skoonmaak: Remove the ice basket. Clean the interior of the water reservoir and ice-making components with a soft cloth dampened with a mild detergent solution. Rinse thoroughly with clean water.
3. Buitenste skoonmaak: Vee die buite-oppervlak af met 'n sagte, damp lap. Moenie skuur skoonmaakmiddels of oplosmiddels gebruik nie.
4. Dreinering: Periodically drain any remaining water from the reservoir using the drain plug located at the bottom or back of the unit (refer to specific model for exact location).
5. First Use Recommendation: For best taste, clean the unit thoroughly before its first use.

Berging

If the ice maker will not be used for an extended period, drain all water, clean the unit, and allow it to dry completely before storing in a cool, dry place.

Probleemoplossing

Spesifikasies

• Handelsmerk: Hicon
• Model: B07S3JLSKY
• Produk Afmetings (D x B x H): 35.7 cm x 42.3 cm x 45.2 cm
• Ysproduksiekapasiteit: Tot 25 kg per 24 uur
• Ys berging kapasiteit: 1.2 kg
• Wattage: 160 watt
• Voltage: 220 Volt
• koelmiddel: R600a
• Materiaal tipe: Plastiek
• UPC: 195893458158

Figuur 4: Produkafmetings
This diagram illustrates the physical dimensions of the ice maker for placement and installation planning.

Waarborg en Ondersteuning

The Hicon Ice Maker comes with a een jaar waarborg vanaf die aankoopdatum. Hierdie waarborg dek vervaardigingsdefekte onder normale gebruiksomstandighede.

For warranty claims, technical support, or any questions regarding your product, please contact Hicon customer service. Please have your model number (B07S3JLSKY) and proof of purchase ready when contacting support.

Hicon has over 10 years of experience in developing ice machines, ensuring advanced ice-making technology and excellent quality.