ECOELER 6-inch Dimmable LED Disk Light Instruction Manual

1. About Your ECOELER LED Disk Light

The ECOELER 6-inch Dimmable LED Disk Light is a high-quality, energy-efficient lighting solution designed for various indoor applications. This fixture provides bright, warm white illumination and features a low-profile design for seamless integration into your ceiling.

• Hoë kwaliteit: Features a 7.3-inch round metal light cover for corrosion protection and rust prevention. Equipped with high-quality LED chips, it delivers 1000 lumens at 16.5 watts, ensuring well-balanced light with no flickering and an estimated lifespan of 50,000 hours.
• Smooth Dimmable: Offers a full range of seamless dimming from 5% to 100%, allowing precise control over brightness for any situation, from a soft night glow to bright task lighting.
• Lae Profile Ontwerp: The ultra-thin 0.9-inch design provides a sleek look, ideal for spaces with low ceilings or for achieving a modern aesthetic.
• Wye toepassings: Geskik vir damp locations, making it perfect for entrances, living rooms, bedrooms, kitchens, dens, and covered outdoor areas.
• Veiligheid verseker: ETL and FCC listed, ensuring compliance with safety and quality standards.

2. Pakketinhoud

Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:

• LED Disk Light Fixture (4 units)
• E26 Adapter and Spring Clips
• Installation Screws (Short and Long)
• Draadmoere
• Instruksie Handleiding

3. Veiligheidsinligting

Please read and understand all instructions before installing or operating this product. Failure to do so may lead to electric shock, fire, or other hazards that could cause injury or property damage.

• WAARSKUWING: Risiko van elektriese skok. Ontkoppel krag by die lont of stroombreker voor installering of diens.
• WAARSKUWING: Risk of fire. Use only in circuits rated for 120V AC.
• Hierdie produk moet in ooreenstemming met die toepaslike installasiekode geïnstalleer word deur 'n persoon wat vertroud is met die konstruksie en werking van die produk en die betrokke gevare.
• Ensure all electrical connections are secure and correct.
• Do not modify the fixture or use it for any purpose other than its intended use.
• Moenie die toebehore met nat hande hanteer nie.
• Geskik vir damp liggings.

4. Installasie-instruksies

The ECOELER LED Disk Light can be installed into either a standard junction box or a recessed can (5-inch or 6-inch).

4.1. Junction Box Installation

1. Skakel krag af: Ensure power is disconnected at the circuit breaker before starting.
2. Verwyder die lens: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Koppel bedrading: Connect the supply wires from the junction box to the fixture wires using the provided wire nuts (black to black, white to white, ground to ground).
4. Attach fixture to junction box: Align the fixture base with the junction box and secure it using the provided screws.
5. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
6. Herstel krag: Skakel die krag weer by die stroombreker aan.

4.2. Recessed Can Installation

1. Skakel krag af: Ensure power is disconnected at the circuit breaker before starting.
2. Verwyder die lens: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Install E26 adapter: Screw the E26 adapter into the existing recessed can socket.
4. Koppel bedrading: Connect the fixture wires to the E26 adapter wires using the provided wire nuts (black to black, white to white).
5. Install spring clips: Attach the spring clips to the designated slots on the fixture base.
6. Push disk into can: Carefully push the LED disk light into the recessed can until the spring clips hold it securely in place, flush with the ceiling.
7. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
8. Herstel krag: Skakel die krag weer by die stroombreker aan.

5. Bedryfsinstruksies

The ECOELER LED Disk Light is designed for simple operation and offers smooth dimming capabilities.

5.1. Skakel aan/af

Operate the light using a standard wall switch connected to the fixture's circuit.

5.2. Dimfunksie

This fixture is compatible with most standard LED dimmers, allowing for smooth brightness adjustment from 5% to 100%. To dim the light, use a compatible dimmer switch (not included) installed in your electrical system.

6. Onderhoud

The ECOELER LED Disk Light requires minimal maintenance.

• Skoonmaak: Om die toestel skoon te maak, maak seker dat die krag afgeskakel is. Gebruik 'n sagte, droë of effens gedrenkteamp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electrical components.
• Geen gebruikerdiensbare onderdele nie: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the fixture.

7. Probleemoplossing

If you experience issues with your ECOELER LED Disk Light, refer to the following common problems and solutions:

If problems persist, contact ECOELER customer support for assistance.

8. Spesifikasies

9. Waarborg en Ondersteuning

ECOELER products are designed for quality and durability. This product comes with a limited warranty.

• Waarborg: Refer to the product packaging or ECOELER's official webwebwerf vir spesifieke waarborgbepalings en -voorwaardes.
• Kliëntediens: If you encounter any problems during use or have questions regarding installation or operation, please contact ECOELER customer service. We aim to provide a reply within 24 hours.