1. Inleiding
The GameMax Mirage 120mm PC Cooling Fan is designed to provide efficient cooling for computer components while offering customizable RGB lighting. This fan features a dual-ring Rainbow LED design, a hydraulic bearing for quiet operation, and a 7-blade fan structure. It is compatible with 5V addressable 3-pin Aura Sync systems, allowing for synchronized lighting effects with compatible motherboards or controllers.
Beeld 1.1: Voorkant view of the GameMax Mirage fan with active Rainbow LED lighting.
2. Veiligheidsinligting
- Ensure your computer system is powered off and unplugged from the wall outlet before installation or maintenance.
- Handle components with care to avoid damage from static electricity. Consider using an anti-static wrist strap.
- Do not force connectors. Ensure correct orientation before plugging in cables.
- Keep the fan away from liquids and excessive moisture.
- Moenie probeer om die waaiereenheid uitmekaar te haal verder as wat in hierdie handleiding beskryf word nie.
3. Pakketinhoud
Verifieer dat alle items in jou pakket teenwoordig is:
- 1 x GameMax Mirage 120mm PC Cooling Fan
- 4 x Monteer Skroewe
Image 3.1: Retail packaging for the GameMax Mirage fan.
4. Opstelling en installering
Follow these steps to install your GameMax Mirage 120mm PC Cooling Fan:
- Berei jou stelsel voor: Power off your computer and unplug it from the power outlet. Open your computer case to access the fan mounting locations.
- Monteer die waaier: Position the fan in your desired location (e.g., case front, rear, top, or radiator). Ensure the airflow direction is correct for your cooling setup. Use the four included mounting screws to secure the fan to the chassis or radiator. The fan features rubber pads on the corners to help reduce vibration.
- Koppel waaierkrag: Locate the 3-pin power connector on the fan cable. Connect this cable to an available 3-pin fan header on your motherboard or a fan controller.
- Connect RGB Lighting: Locate the 5V addressable 3-pin Aura connector on the fan cable. Connect this to a compatible 5V ARGB header on your motherboard (often labeled 'VDG' or 'ARGB') or an external RGB controller/hub. Warning: Do not connect this to a 12V RGB header, as it will damage the LEDs.
Image 4.1: The 3-pin power connector (top) and 5V addressable 3-pin Aura connector (bottom).
The fan cables are braided for improved aesthetics and durability, helping to keep your build neat and tidy.
5. Bedryfsinstruksies
Once installed, the GameMax Mirage fan operates as follows:
- Waaierspoedbeheer: The fan speed is controlled via the 3-pin power connector. If connected to a motherboard fan header, the speed can typically be adjusted through your motherboard's BIOS/UEFI settings or dedicated software.
- RGB-beligtingbeheer: The Rainbow LED lighting is controlled via the 5V addressable 3-pin Aura connector.
- If connected to a compatible motherboard (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync), you can use the motherboard's software to customize lighting effects, colors, and synchronization with other ARGB components.
- If connected to an external RGB hub/controller, refer to the instructions provided with your specific hub/controller for lighting customization options.
Beeld 5.1: Hoekig view of the GameMax Mirage fan showcasing its dual-ring Rainbow LED lighting.
6. Onderhoud
Gereelde onderhoud help om optimale werkverrigting en lang lewensduur van jou verkoelwaaier te verseker:
- Stof skoonmaak: Periodically inspect the fan blades and frame for dust accumulation. Use compressed air or a soft brush to gently remove dust. Ensure the fan is powered off and unplugged before cleaning.
- Kabel inspeksie: Occasionally check the power and RGB cables for any signs of wear or damage.
7. Probleemoplossing
- Waaier draai nie:
- Ensure the 3-pin power connector is securely plugged into a functional fan header on the motherboard or controller.
- Check motherboard BIOS/UEFI settings to ensure the fan header is enabled and configured correctly.
- LEDs Not Lighting Up or Incorrect Colors:
- Verify the 5V addressable 3-pin Aura connector is securely connected to a compatible 5V ARGB header (not 12V RGB).
- Ensure your motherboard's RGB software or external controller is properly installed and configured.
- If using a splitter or hub, ensure it is powered and functioning correctly.
- Oormatige geraas:
- Kontroleer vir enige kabels of obstruksies wat die waaierlemme belemmer.
- Ensure the fan is securely mounted and the rubber pads are properly seated to absorb vibrations.
- Dust accumulation can cause imbalance and noise; clean the fan as described in the Maintenance section.
8. Spesifikasies
| Kenmerk | Spesifikasie |
|---|---|
| Model | MIRAGEWHITE FINS |
| Fan Grootte | 120 mm x 120 mm x 25 mm (0.98 x 4.72 x 4.72 duim) |
| Tipe dra | Hidrouliese laer |
| Fan Blades | 7 Lemme |
| Tipe LED | Addressable Rainbow LED (Dual-Ring) |
| Fan Power Connector | 3-pen |
| RGB Connector | 5V Addressable 3-Pin Aura Connector |
| Bedryfsvoltage | 5 Volts (for RGB) / 12 Volts (for fan motor, typical for 3-pin) |
| Gegradeer Wattage | 3 Watt |
| Maksimum rotasiespoed | 1800 RPM |
| Geraasvlak | Ongeveer 25 dB(A) |
| Materiaal | Rubber (for vibration damping) |
Beeld 8.1: Agterkant view of the GameMax Mirage fan, displaying the product label with model and electrical specifications.
9. Waarborg en Ondersteuning
For warranty information and technical support, please refer to the official GAMEMAX webwebwerf of kontak jou kleinhandelaar. Bewaar jou bewys van aankoop vir waarborgeise.