Perlegear TV-muurbevestiging PGXSF1 Instruksiehandleiding

1. Inleiding

This instruction manual provides detailed guidance for the safe and proper installation, operation, and maintenance of your Perlegear TV Wall Mount, model PGXSF1. Please read this manual thoroughly before installation and retain it for future reference. Incorrect installation may result in product damage or personal injury.

2. Produk verbyview

The Perlegear PGXSF1 is a full-motion TV wall mount designed for flat-screen LED, LCD, and OLED televisions. It offers flexibility in viewing angles and space-saving features.

Sleutel kenmerke:

• Skermgrootte verenigbaarheid: Fits most 10 to 32-inch televisions.
• Gewig kapasiteit: Supports TVs up to 20 kg (44 lbs).
• VESA-versoenbaarheid: 50x50mm, 75x75mm, 100x100mm.
• Beweging:
  • Tilt: +5° to -15°
  • Draai: +/- 90°
  • Rotasie: 360°
• Uitbreiding: Retracts to 7.9 cm (3.1 inches) from the wall and extends up to 44 cm (17.3 inches).
• Materiaal: High-grade alloy steel construction.

Figuur 2.1: Hoof view of the Perlegear PGXSF1 TV Wall Mount.

Figuur 2.2: VESA mounting pattern compatibility (50x50mm, 75x75mm, 100x100mm).

Figuur 2.3: The mount is tested to support up to 20 kg (44 lbs).

3. Veiligheidsinligting

WAARSKUWING: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty.

• Do not begin installation until you have read and understood all instructions and warnings contained in this manual.
• Maak seker dat die monteeroppervlak die gekombineerde gewig van die montering en die televisie veilig kan ondersteun.
• This product is designed for installation on wood studs, solid concrete, or brick walls. MOENIE net op gips monteer nie.
• Use only the hardware provided or specified by Perlegear.
• If you have any doubts about the installation process, consult a qualified professional.
• Hou kinders en troeteldiere weg tydens installasie.
• Kontroleer gereeld of die bevestiging stewig is en dat alle bevestigingsmiddels styf vas is.

4. Pakketinhoud

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact Perlegear customer service.

• 1x TV Wall Mount Assembly (Wall Plate and Arm)
• 2x Wall / Lag Screws
• 2x Wall Screw Washers
• 2x Concrete Anchors (Rawl Plugs)
• 4x M4 Screws (16mm length)
• 4x M4 Screws (30mm length)
• 4x M6 Screws (16mm length)
• 4x M6 Screws (30mm length)
• 4x Spacers (10mm thickness)
• 8x Spacers (5mm thickness)
• 4x Silver Double Washers
• Instruksie Handleiding

5. Opstelling en installering

Volg hierdie stappe noukeurig vir 'n veilige installasie.

5.1 Voorinstallasiekontroles:

1. Verifieer TV-versoenbaarheid: Ensure your TV's screen size is between 10 and 32 inches, its weight does not exceed 20 kg, and its VESA mounting pattern is 50x50mm, 75x75mm, or 100x100mm.
2. Identifiseer muurtipe: Determine if your wall is wood stud, solid concrete, or brick. Do not install on drywall alone.
3. Versamel gereedskap: You will need a drill, stud finder (for wood studs), level, pencil, and screwdriver.

5.2 Wall Plate Installation:

1. Merk boorligging: Hold the wall plate against the wall at your desired height. Use a level to ensure it is straight. Mark the two drilling points through the holes on the wall plate.
2. Boor loodsgate:
   • Vir Houtstutte: Drill two pilot holes (e.g., 5.5mm / 7/32 inch diameter) at the marked locations to a depth of 60mm (2.36 inches).
   • Vir Beton-/Baksteenmure: Drill two pilot holes (e.g., 10mm / 3/8 inch diameter) at the marked locations to a depth of 60mm (2.36 inches). Insert the concrete anchors (rawl plugs) into these holes, ensuring they are flush with the wall surface.
3. Heg muurplaat aan: Align the wall plate with the pilot holes. Insert the wall/lag screws through the wall plate and into the pilot holes (and anchors if applicable). Use the wall screw washers. Tighten the screws firmly until the wall plate is securely fastened to the wall. Do not overtighten.

5.3 Attaching TV to Mount:

1. Select TV Screws and Spacers: Choose the appropriate M4 or M6 screws that fit your TV's VESA holes. The screws should be long enough to securely engage the TV's threads but not so long as to damage internal components. Use the provided spacers if your TV has an uneven back or recessed mounting holes.
2. Attach Mount to TV: Carefully align the VESA plate of the mount with the mounting holes on the back of your TV. Insert the selected screws through the VESA plate (and spacers if used) and into the TV's mounting holes. Tighten securely with a screwdriver.

6. Bedryfsinstruksies

Once installed, your Perlegear PGXSF1 mount allows for various adjustments to optimize your viewondervinding.

Adjusting the TV Position:

• Uitbreiding en Terugtrekking: Gently pull the TV away from the wall to extend the arm, or push it towards the wall to retract it. The arm extends up to 44 cm and retracts to 7.9 cm.
• Draai: Carefully pivot the TV left or right up to +/- 90 degrees to achieve the desired horizontal viewing angle. The maximum swivel angle may vary depending on TV size and distance from the wall.

Figuur 6.1: Swivel the TV left or right for optimal viewing.
• Kantel: Pas die vertikaal aan viewing angle by tilting the TV +5 degrees upwards or -15 degrees downwards. Loosen the tilt adjustment knobs (if present) slightly, adjust the angle, and then re-tighten to secure.


Figuur 6.2: Tilt the TV up or down to reduce glare or adjust viewhoogte.

• Rotasie: The TV can be rotated 360 degrees, allowing for landscape or portrait orientation. This feature is useful for specific applications or to correct minor leveling issues after installation.


Figuur 6.3: Rotate the TV 360 degrees for flexible orientation.

7. Onderhoud

Gereelde onderhoud verseker die lang lewensduur en veilige werking van jou TV-muurbevestiging.

• Skoonmaak: Vee die monteerstuk af met 'n sagte, droë lap. Moenie skuurmiddels of oplosmiddels gebruik nie.
• Periodieke ondersoeke: Every few months, check all screws and bolts to ensure they are securely tightened. Re-tighten if necessary.
• Smering: If the swivel or tilt mechanisms become stiff, a small amount of silicone-based lubricant (e.g., WD-40) can be applied to the moving joints. Wipe off any excess.

8. Probleemoplossing

Hierdie afdeling spreek algemene probleme aan wat jy mag teëkom.

Issue: Mount movement (swivel/tilt) is stiff.

Oplossing: The joints may be overtightened or require lubrication. Locate the nuts on the swivel and tilt mechanisms. Slightly loosen them to allow for easier movement, then re-tighten to a comfortable tension. Apply a small amount of silicone-based lubricant to the moving parts if needed.

Issue: TV is not level after installation.

Oplossing: The 360-degree rotation feature allows for minor leveling adjustments. Gently rotate the TV until it is level. If the issue persists, re-check the wall plate installation with a level.

Issue: Screws do not fit my TV.

Oplossing: The package includes a variety of M4 and M6 screws of different lengths, along with spacers. Ensure you are using the correct diameter and length for your TV's VESA holes. If none of the provided screws fit, you may need to purchase specific screws compatible with your TV model. Consult your TV's manual for VESA screw specifications.

9. Spesifikasies

10. Waarborg en Ondersteuning

This Perlegear TV Wall Mount PGXSF1 comes with a 10 jaar vervaardiger se waarborg.

For technical assistance, missing parts, or warranty claims, please contact Perlegear customer support. Refer to the product packaging or the official Perlegear webwebwerf vir die mees onlangse kontakinligting.

Please have your model number (PGXSF1) and purchase information ready when contacting support.